My date and time is wrong. The app won't open for me to change it

I Changed the date on my MacBook Pro and them tried reopen the date and time app and it won't open.

I changed time and now my MacBook won't work

Similar Messages

  • I downloaded the new software mavericks and now some of the apps won't open

    i downloaded the new software mavericks and now some of the apps won't open

    mokugin wrote:
    Can't speak for luciantpa, but I can't open the following:
    Stickies
    Mail, opens then crashes
    Pages, Numbers, Keynote the Marvericks versions
    App Store
    Quicktime
    Calender
    to name a few.  haven't gone through everything yet.
    Have heard of issues with all of those I bolded. Did you download the updated versions of Pages, Numbers, Keynot as the older versions do not work with Mavericks?

  • Date and time are wrong

    My date and time are wrong on boot up and won't adjust back to normal automatically.  I think the internet is telling me it's a problem with either my PRAM or CMOS or NVRAM battery, the little guy that holds info while the big guy is tapped.  I want to replace this. Is that possible?  What is the battery actually called?

    Hey MisterW,
    Thanks for the question. It sounds like you wish to reset your PRAM/NVRAM, the following article should assist you:
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Thanks,
    Matt M.

  • I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

    Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

  • Why won't the date and time stay in the menu bar?

    I just installed 10.6.2 and even when I use System Preferences to check the box in the Date/Time panel they flicker and disappear from the menu bar. Why won't the Date and Time stay in the Menu Bar? Any suggestions? Thanks.
    Frank B

    Doesn't any bring up the fact that Apple has so many customers with problems that the refuse to help unless you pay them cash? They update you and screw you over and then offer no useful troubleshooting scenarioius to help their millions of customers. It is because they want millions of our dollars. I hate Apple.

  • Report the date and time of all the systems reporting to sccm

    Hi,
    We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
    Appreciate any help regarding this.
    Thanks

    Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download.  Can I reinstall the app without losing my music?

    In the middle of downloading an update for garage band and lost the connection, now the app won't open or finish the download.  Can I reinstall the app without losing my music?

    The obvious way to resolve this on a computer would be to uninstall the app, then reinstall it, however on an iOS device that would cause all the data assoicated with the app to be thrown away.
    Make sure your iTunes library has the latest updates for all your apps, then backup and restore the device. This should pull back a fresh copy of the app from your iTunes library and then give it the data from your device backup.
    tt2

  • I just downloaded new software and now some of my apps won't open

    i have downloaded the new software and now some of my apps won't open. Can anyone help

    some apps need to be updated by the developer to work with the new iOS version
    check app store app for updates or arm yourself with patience it's pretty common for that to happen with major iOS updates

  • Most of the apps won't open after updating to maverick os x

    update done today,but after the installation was complete and updated all my apps from app store i did restart and then most of the apps didn't open anymore (text edit,app store ,quickplayer,etc.)any idea why ?thnks.

    Same Here!! Please Help

  • I have a iphone 3 and want to know if there is a date and time stamp on the phone for the pictures

    is there a date and time stamp for pictures on iphone 3?

    Open a one of your pictures in any photo app on your computer and see if the metadata is there.  I'd be surprised if it isn't.

  • Changing date and time is wrong with time zone problem

    Okay, searched some of the forums, but didn't get the most correct answer to this:
    I just imported all my photos into Aperture from iPhoto (chose to have Aperture manage files as I don't plan on using iPhoto any longer. When I imported the files, I decided to do some organizing by date into folders. no problem.
    In some of my projects, I found some files that I imported from scans or got from others who had a film roll and processed it at a lab, and the dates from those files aren't the dates that the event took place. I went into Metadata>Adjust date and time, and changed the date (not so much the time I'm worried about), and checked the "change the masters" little box, too.
    After I close out of that box, the picture has the wrong date. I've determined this is because of the time zone support. I currently live in Japan, and I would like my photos here to show up as the date in the place they were taken. I think the date I enter, it thinks is the date I'm currently in (GMT +9), but aperture chooses to convert the date as if I was saying "hey, the picture I took happened on "date" in GMT +0:00)" which then makes it look in the metadata view as if it happened a day earlier.
    Any imported photos come in as the correct date and time and correct time zone, as far as I can see. It's just when I change the date and time it thinks I mean to have aperture convert it to GMT + 0:00. (but on a little more of a funny side... older pictures that happened in other time zones back in the states it lists the correct date and time for when the picture was taken, but "says" it's GMT +9:00) (another issue I'll deal with later maybe!)
    Hope I've described it in such a way that you can get it.

    I changed time and now my MacBook won't work

  • Date and time often wrong

    My passport date and time randomly revert, about once a week, to show the wrong values. The date always changes to 9 march 2015, and the time to some random no. This all happens independent of whether I have auto date/time update set to on or off. This happens in the uk and abroad. This is the most rudimentary of errors, and is obviously a real pain. All messages and photos go out of sequence, alarm obviously fails, etc. There appears to be no pattern to when this happens. Can anyone help please? Thanks.

    I recommended preforming a complete reload of your device software through BlackBerry link.  This information is provided by a Blackberry knowledge base article.  The following procedure will delete all data and applications on the BlackBerry device. If possible, back up your data prior to reloading device software. See KB33526 for steps.Note: Only reload device software when instructed to do so by BlackBerry Technical Support Services or by another Knowledge Base (KB) article.
     Troubleshooting should always be completed before reloading device software. If appropriate troubleshooting has been completed and the device continues to experience an issue, contact your wireless service provider or administrator to further troubleshoot the issue and escalate to BlackBerry Technical Support Services.If you have been instructed to reload the device software, complete the following steps:On Windows:Ensure the computer is connected to the Internet.Install the latest version of BlackBerry Blend (includes BlackBerry Link) here: www.blackberry.com/blendPower off the BlackBerry device.Open BlackBerry Link.Connect the device to the computer with the USB cable.Under the Devices heading, click the device name when it is displayed.
    Note: If the device is not detected, at the top-right click Preferences.Under Reload Device Software, click Reload.Click OK.On Mac OS:Ensure the computer is connected to the Internet.Install the latest version of BlackBerry Blend (includes BlackBerry Link) here: www.blackberry.com/blendPower off the BlackBerry device.Open BlackBerry Link.Connect the device to the computer with the USB cable.In the menu bar at the top-left of the screen, click BlackBerry Link > Preferences.Under the Reload tab, click Reload.

  • How do you know the date and time synchronization in the windows version?

    Where can I see the date and time synchronization?

    There's a toolbar button sitting in the Customize Palette. Move that button to a toolbar or into the Open Menu box; when you hover the cursor over that button a tooltip will appear with the day-of-week and the time of the last Sync event.

  • HT2473 How can I get the date and time back on the menu bar?

    Several items disappeared from my menu bar for no  reason known to me.  I miss the date and time and want it back. Please .  I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
    What should be my next move?

    One more thing might help us
    In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
    ⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
    Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
    ÇÇÇ

  • How to provide date and time stamp to the extracted file.

    I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
    if i rerun the program the file is overwriting with the same name.
    now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
    like
    if when i executed  at the very first time it should saved with filename, date and time.
    say "Address.txt 04/05/2007 07:55:10"
    When i executed it for second time it doesn't overwrite the file.
    it should create a new file.
    like "Address.txt 04/05/2007 07:59:20".
    Please guide me the way if possible code.
    Thanks in advance.

    Hi Vamsi,
                   Use FM 'F4_PROGRAM' to take file from the user .
    In this case user will enter the file name. u can append date & time to that file path.
    Refer this code.
    CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          PROGRAM_NAME  = SY-REPID
          DYNPRO_NUMBER = SYST-DYNNR
        IMPORTING
          FILE_NAME     = P_P_FILE.
    concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
    CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          filename                        = v_file
         filetype                        = 'ASC'
          write_field_separator           = 'X'
        TABLES
          data_tab                        = i_tab
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF sy-subrc = 0.
        MESSAGE i002.
      ENDIF.
    Reward points if helpful.
    Regards,
    Hemant.

Maybe you are looking for

  • Email attachment with .txt file (first line blank in the file)

    Hi all , Iam trying attach .txt file to email , the file that iam accessing from server  . But first line blank (extra) even though i dont have blank line in original file .Can any help me out to resolve this issue? <u>Example</u> original file 12345

  • HTC Rhyme phone can't set up exchange activesync account

    I am having difficulty having my e-mail set up on my phone. It was working properly two days ago, and all of sudden it stopeed to sync. I thought it was because of my account, so I deleted it from the phone, and trying to set it up again. I received

  • XML message error "No inbound interface found "

    Hi, I have inbound file adapter and mine is standalone XI box, and idoc outbound adapter, when i start the file adapter im getting the folloing error message in SXMB_MONI . Error when determining inbound interface. No inbound interface found for send

  • NameNotFound exception

    I am using weblogic 4.5. My application deployment descriptor shows like this: SessionDescriptor beanHomeName com.mortgagefamily.web.projects.loanstatus.businessservices.RequestDoradoLoanStatusHome My client code is like this: Context ctx = getInitia

  • JSPs getting re-compiled on every invocation

              Hi,           We are on weblogic 7.0, solaris 2.8, jdk1.3.1_03. Below is our scenario.           1. Deploy a JSP say test.jsp. Start the server. Invoke test.jsp.           The java file is generated and compiled. This is fine.           2.