My daughter has managed to forget her new passcode and now it says iphone disabled connect to itunes, but it wont let me....help!

My daughter has managed to forget her new passcode and now it says iphone disabled connect to itunes, but it wont let me....help!

Hi there esbrewer,
You may find the troubleshooting steps in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
If the device is not being recognized in iTunes, take a look at the article below for some additional troubleshooting steps.
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Similar Messages

  • My daughter locked her Ipod touch and it states Ipod is disabled connect to Itunes.  When I connect to Itunes it states unlock with passcode.  Any suggestions on how to fix this

    My daughter locked her Ipod touch and it states Ipod is disabled connect to Itunes.  When I connect to Itunes it states unlock with passcode.  Any suggestions on how to fix this

    iPhone and iPod touch: Unable to update or restore
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • HT4623 I updated my iphone to the new version and now it tells me to connect to itunes  which I did and it's not doing anything else, what do I need to do?

    I updated my iphone to the new version and now it tells me to connect to itunes  which I did and it's not doing anything else, what do I need to do?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore

  • HT1212 i forgot my password to my new 5s phone and i got locked out and it says iphone disabled connect to itunes i tried to reset it but it didnt work

    i forgot my password to my new gold 5s iphone got it 2 days ago. i got locked out after trying mant codes i did one very fast and got in i tried to change the password but i forgot it again! i got locked out again and it says iphone is disable connect to itunes.i tried to reset my phone but i didnt work.

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Note on Recovery Mode.
    You may need to try this More than Once... Be sure to Follow ALL the Steps...
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • It appeared me an update on my iphone 4, which has already iOS 7, and now it tells me to connect to itunes. but when I do, Itunes requests restore phone settings. what is happening?

    Help! I don't know what to do

    The problem is your friend's music does not belong to you.  It is owned by your friend.
    I'm afraid you cannot do what you are trying to do.  Restoring the iPhone is what you would have to do.
    In the future, put your music on the computer and transfer it to the iPhone, not the other way.

  • Younger brother has forgotten his passcode..ipod says i must connect to itunes but this ipod has never been connected before..help!

    my younger brother recently got an ipod touch. since he has had it i have used my apple id to download apps for him; the ipod was never connected via wire to a computer. he has forgotten his password and the ipod is saying i must connect to itunes but i know it needs to be connected to an itunes used previously..there is no itunes used previously in this case. what must i do to reset the ipod to factory settings? thanks

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My computer had an virous so i wiped it and i need to add my old songs on my ipod to my new itunes but it wont let me without deleting my music

    my computer had an virous so i wiped it and i need to add my old songs on my ipod to my new itunes but it wont let me without deleting my music

    - Transfer iTunes pirchases by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Make a backup of he iPod by connecting the iPod to the computer.  Right clickon the iPod under Devices in iTunes and select Backup
    - Restore the iPod from that backup.

  • Hi, My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    Hi,
    My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??

    While connected to iTunes, try...
    http://support.apple.com/kb/HT1808

  • Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Hi my mini ipad has locked me out and says connect to Itunes but it wont connect to it

    Try:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • HT4623 my phone is locked. it says to iphone disabled connect to itunes. what do i need to do from here..?

    My iphone is locked. its says iphone diasabled connect to itunes.. what do i need to do from here..?

    Open iTunes on computer, connect iPhone to computer with USB Cable, Restore iPhone.

  • HT1212 my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?

    my ipod has "ipod is disabled connect ti itunes" but it will not let me put in the passcod or anything! i cant get off this display?

    You have to restore:
    Forgotten Passcode or device disabled after entering wrong passcode

  • HT1339 My Ipod is locked since my daughter tried too many times trying to put the password. Now it says " iPod is disabled" connect to iTunes, but when I connect to iTunes it says "Please enter the password to access"

    My Ipod is locked since my daughter tried too many times trying to put the password. Now it says " iPod is disabled" connect to iTunes, but when I connect to iTunes it says "Please enter the password to access"

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • My new ipod says ipod disabled connect to itunes what is that

    my new ipod says ipod disabled connect to itunes what do i do

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • TS1368 my ipad has a message " ipad is disabled" connect to itunes  but I cant connect to itunes

    I have an Ipad and my 3 yr old pushed the password so many times and now it has a message on it Ipad is disabled  connect to itunes but I cant connect to Itunes because my Ipad has never been connected to my computer. Is there anything I can do without loosing my pictures.

    First try to recover your original password.ID so you can redownload iTunes purchases
    iTunes Store: Retrieving and changing passwords (Apple ID)
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Daughter has used iPad for her Apple account and I can't use the App store because her username automatically shows up in the Apple ID window.  How do I change that?

    My daughter has used our iPad for her Apple account and now I can't use the App store because her username automatically shows up in the Apple ID window.  How do I change that so I can put our Apple ID in with the appropriate Password?

    Open Settings -> Store
    Tap on the Apple ID shown and sign out. Then sign in with your own Apple ID.
    Update: Oops, AnaMusic was faster...

Maybe you are looking for

  • Follow-up posting flow type Credit for 870 does not exist

    Hi SAP, I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this: Diagnosis You have changed the data in such a w

  • Wireless Internet configuration

    I installed Solaris 10 8/07 on my Toshiba Satellite laptop and it is running great. I am now trying to connect to the internet with an external nic card, but can not get the OS to recognize the card or the slot. I have wireless satellite service in m

  • Drums not appearing in staff style list?

    Am trying to convert some drummer tracks into drum notation however when i click staff style there is no option for drums. It appears to be missing

  • Writing binary data in same format as with FORTRAN code

    Hello, I would like to write out data in a binary format that is used by FORTRAN unformatted direct access files. I have some code in FORTAN that produces the correct format; however, I have been unable to reproduce the output with a Java method. The

  • Solution to handle Re-furbished / Repaired Material

    Dear MM Gurus I would be really greatful if someone gives the solution to handle Re-furbished / Repaired Material in Inventory Management, as per below scenario : 1. We have implemented Inventory Management Module on SAP ERP2005 ECC6.0. 2. We have bi