My daughter Nano just shows the apple logo and that is it can'y do anything with it.
My daughters Nano just shows the apple logo and that is it we can not do any thing with it.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
Similar Messages
-
My Ipad stop working and is just showing the apple logo and right after that the ITunes logo , I connected it to my PC but it ask me to restore it. Is there any trick to do not loose all my pictures if I restore it?
Once the Device is in Recovery Mode... it is too late to save anything...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it. I deleted all files from ifile and then it froze... any ideas of how to make it work again?
Discussions of hacked ipods is not permitted here.
-
HT201263 why does my itouch just show the apple logo and nothing else?
i went into my settings to restore all data and content, and it said it might take up to 4 hours so i let it do that and when it finished it just showed the apple logo when i restarted my itouch, i can reset it any time but itll just stay in the apple logo screen, and i tried restoring my itouch but it said it wouldnt let me for some reason. what do i do?
Because the iPod is sick.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore -
I plugged in my ipod to recharge it and for some reason, it just stopped and only the apple logo is showing. I may have unplugged it before it was done, not even sure at this point but now only the apple logo and I can't even shut it off. Any ideas of what I can try now? Thanks much.
Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)
-
Nano is showing the apple logo, and then is going straight to exclamation
When i turn my Nano on, it shows the apple logo, then goes straight to the folder with the exclamation mark...i called apple and they told me t send it in, and i wanted to know if there is any way that i can take it to the store, so they fix it there free of charge? HELPPP!!
thanks,
Mike
Dell Inspiron 8100 Windows XPHave you tried this?
iPod shows a folder icon with exclamation point when you turn it on
HP Desktop Windows XP iPod nano -
My mac won't turn on again, it just shows the apple logo and some code
My mac was freezing up a bit while trying to get onto lanaboards.com so I decided to restart it. I figured i might as well update it at the same time. So i did that and chose the restart option that comes up when you update. It seemed like the update went through, but then it told me that it couldn't update but i was asked if i wanted to restart it, so i did. For some reason it didn't restart for a couple of minutes so i turned it off by pressing the on/off button. When i turned it back on it made the sound and then the grey background with the Apple logo appeared. Suddenly this code comes up using the word "panic" a couple of times. I'm not gonna type the whole thing cause it's kina long. It also says "Mac OS version: not yet set" (maybe cause i tried to update?) and "Kernel version: David Kernel version 12.2.1" It also says "debugger called: <panic>"
I won't be able to get it to the apple store for a week because everything closes down on thursday because of Easter and the buses seem to not go tomorrow and no one can drive me. I hope there's something i can do cause i have an important exam (100% of my grade) in two weeks so I'm freaking out a bit here. I also have some stuff due next week that just went up.
I really hope someone can help me, or at least know what may be the problem.
PS. I'm not 100% sure which operating system I have so i chose what i assume is the second newest iOS cause I know i have iOS at least
PS 2: My hard disc crashed about two months ago and was fixed at my local apple supplier, if that may have anything to do with the matter.you are not in MacBook Pro forum, so might be harder to swap out and replace hard drive but you should definitely have had them do that or even yourself.
Make sure you are at least using TimeMachine AND another backup method to clone your system drive so you always have a working 'spare' backup drive you can boot and work from - USB3 is good, TimeMachine even works decently for some on USB 2.0
Finding out why and troubleshooting a panic is a matter of trial and error after taking a look at what hardware, what software you installed (and some of which should be removed), even whether it is triggered by heat from processor or RAM (memory) errors, and memory errors can be triggered by software.
Reset SMC
http://support.apple.com/kb/HT3964
Resetting NVRAM
http://support.apple.com/kb/HT1379
Safe Mac Guide
http://www.reedcorner.net/mpg/
About Mac OS X Kernel Panics:
http://support.apple.com/kb/TS3742
Resolving Kernal Panics
http://www.thexlab.com/faqs/kernelpanics.html
http://reviews.cnet.com/8301-13727_7-10344626-263.html
http://macs.about.com/od/usingyourmac/qt/Troubleshooting-Os-X-Kernel-Panics.htm
http://support.apple.com/kb/TS3742
There’s trouble in my laptop paradise. I ended that with this caveat:
It’s much more comfortable to type on the 2011 model, with one big exception: the 2011 model runs much hotter.
I need more time to form a concrete opinion, but it seems so far that this CPU’s awesome performance definitely comes at a cost of increased heat and reduced battery life. For my intended usage as a desktop most of the time, that’s an acceptable tradeoff.
This turned out to be worse than I thought it would be, and today, the last day of my return period, I decided to return it and exchange it for a slower model.
The problem
Not only does the 2011 15” MacBook Pro run much hotter than previous generations, but as a result, the fans very frequently kick up to full speed (6200 RPM), greatly annoying anyone in the area who’s not wearing headphones.
I’ve done a lot of Google research and impromptu Twitter surveys, and this seems like a very common problem, exacerbated by a number of factors:
The quad-core i7 CPUs in the 15” run very hot, with a TDP of 45W, 10W higher than the previous dual-cores. Many people speculate that the 15” case and fan design just isn’t designed for CPUs that need this much cooling regularly.
The Core i7 CPU can use Intel’s Turbo Boost to dramatically overclock one CPU core to handle single-threaded loads whenever power and heat allow. It therefore hits its maximum TDP often when just one core is being maxed out, such as when Spotlight or Backblaze index new files, or when Time Machine is backing up.
The 2.2 and 2.3 GHz 15” models come with an AMD Radeon HD 6750M GPU, which adds significant heat. Modern 15” MacBook Pros dynamically switch between the low-powered Intel integrated GPU and the high-powered (and hot) AMD GPU as needed by applications, but the AMD GPU will always be used when an external monitor is connected — the Intel integrated GPU cannot output video over the Thunderbolt port in the 15”. (Oddly, it can in the 13” MacBook Pro and both MacBook Airs.)
It generates so much heat that it can’t be used in “clamshell mode” (closed, but with an external keyboard, mouse, and monitor attached), which has reduced airflow, without risking overheating, kernel panics, and possible long-term damage. I can’t see why Apple even enabled clamshell mode on it.
Some people report issues with the battery draining while playing a game. The 15” MacBook Pro comes with an 85W power adapter, but when stressing the CPU and GPU (such as when playing a game), the laptop draws about 93W — I don’t know enough about the electronics here to say for sure, but an insufficient power adapter capacity sounds like a plausible reason why the battery might drain under high computational load. If so, this is an embarrassing oversight by Apple.
The thermal paste seems to be very inconsistently applied, or there’s some other common manufacturing defect with the cooling system that varies per laptop. Many, many people reported having these issues and exchanging the laptop for a new one that shows far fewer issues. Many dedicated tinkerers have also reported success after reapplying the thermal compound between the CPU and heatsink, but that requires a very deep, warranty-voiding disassembly that I’m not comfortable doing. (I also haven’t owned thermal paste since 2001.)
Put simply, it sounds like the 2011 15” MacBook Pro has a lot of manufacturing inconsistencies and defects that result in improper cooling. But it also sounds like Apple wedged far too much power draw and heat into an enclosure that’s not designed to properly cool or power these demands. It’s not like Apple to release products like this.
But if I can get one working within my tolerances, it’s still the perfect computer for me right now. So I’m trying.
The attempted solution
Tonight, after requesting the return on my 2.3, I ordered a new, slower model that’s likely to run cooler with less fan noise. It’s the base-model 15”, but with an antiglare (matte) display added:
AMD Radeon HD 6490M: It’s manufactured on the same 40nm process as the 6750M, but has far less computational power, so I’m guessing this will result in much lower power consumption and heat.
2.0 GHz quad-core i7: This is the only CPU available with the 6490M. While I don’t expect it to be dramatically cooler-running than the 2.3 since it’s specced with the same 45W TDP, it does have a lower clock and lower Turbo Boost speeds, so I can probably expect an approximately proportional heat reduction.
So I’ll see what happens. I’m not sure what I’ll do if it doesn’t work out. This generation of 15” MacBook Pros has a lot of problems, and Apple really needs next year’s cooler-running Ivy Bridge processors as soon as possible.
http://www.marco.org/2011/09/20/heat-and-fan-issues-with-2011-15-inch-macbook-pr o -
My iphone 3 has completely frozen. Facebook and other apps were not loading properly so I deleted facebook and went to the apps store and reloaded. It was still loading and then my phone just froze - I turned it off and then tried to turn it back on and all I am getting is the apple logo in the middle of the phone and rather stupidly I have never synched it!! I know what an idiot!!! I have tried calling vodafone but not surprise they are closed for technical help at this time of night.
Any suggestions greatly received......
Thank youUnable to Update or Restore
http://support.apple.com/kb/HT1808
See Here for
Frozen or unresponsive iPhone -
how can i reset my iphone? I chose to reset my settings and all I see now is the apple logo, but does't want to reset.
Try this reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, restore the device > iTunes: Restoring iOS software -
serial no is
Hi chelsealynn1205,
If you are having issues with your Mac not booting past the grey Apple screen, you may find the following article helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
- Brenden -
My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
If you can help me facetime me at [email protected] or msg me.It would help to know whether it ever did work, or is this a new iPad for you? If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it. If it used to work, try doing a reset.
-
i updated my iphone 4 to ios 6.. when it finished.. my iphone kept blinking just showing the apple logo.. i connected it to my itunes it didnt read.. help!
Follow the instructions here > http://support.apple.com/kb/HT1808
Note: You may need to try it several times to get it to work.
Maybe you are looking for
-
I am having trouble with my forms.
At first I thought it was the fact that flash was not publishing the AC_RunActiveContent.js file. But when I dug deeper I guess in flash cs4 the AC_RunActiveContent.js file is not needed anymore. So why are my forms not working? Here is the PHP I am
-
Could not resolve mx:AdvancedDataGrid to a component implementation
Hi, I receive this error msg: "Could not resolve <mx:AdvancedDataGrid> to a component implementation" whenever i try to compile my application using the Flex 3 application command line compile tool. I've gone through the folder where i exctracted the
-
Mail Problems: Loading and Quitting
This might turn out to be a long discription, but bear with me... I had problems with Mail today--I had just received an iTunes receipt and Mail crashed; it appeared as if the program got stuck loading the new message. When I reopened Mail, none of m
-
what is the best way to connect my 2010 macbook pro to my HDTV? I just don't know whats great
-
FR printing changing the POV automatically
Hi, Is it possible to change the POV when printing a report. Say we create a report for one Cost Centre (POV). If we need to print the same report for 20 Cost centres in a one go without changing the POV each and everytime, How we do it using FR 9.3.