My daughter's data has been put on my icloud account.  I cannot hook up to the icloud wihtout getting all her info on my phone.  i would like to delete the account and start over or find a way to remove her info

Without realizing it, my daughter and I are both using my icloud account for our phones.  Now I cannot go to the cloud without importing all of my daughter's data to my phone.  Is there any way to remove her data from the icloud account or delete the account and start over?  I plan on wiping her phone clean and having her create her own account with her own email address

Be sure she signs out of your account before wiping her phone. Also, make sure Find my iPhone is disabled before you wipe it..
Unfortunately, since you have "merged" her data with yours, you will need to delete each unwanted item individually. If you delete the account, when you sign back in with the same account the same data will be synched back from iCloud.

Similar Messages

  • Can I make a bootable DVD from the Mavericks download. I would like to wipe my iMac and start over.

    Can I make a bootable DVD from the app store download of Mavericks. I wish to wipe my iMac clean and start over
    thanks in anticipation

    Well you can make a bootable dvd this way:
    After downloading the Install OS X Mavericks.app file from the Mac App Store, run these 12 commands in Terminal to create a Mavericks.iso file and then burn it to a dual layer DVD with Disk Utility. You may then boot up from it by holding the option key down and then install mavericks. This will not install a recovery partition. To do that, uncompress and run the script file https://dl.dropboxusercontent.com/u/13872235/Musings/Recovery%20Partition%20Crea tor%203.7.zip
    hdiutil attach /Applications/Install\ OS\ X\ Mavericks.app/Contents/SharedSupport/InstallESD.dmg -noverify -nobrowse -mountpoint /Volumes/install_app
    hdiutil convert /Volumes/install_app/BaseSystem.dmg -format UDSP -o /tmp/Mavericks
    hdiutil resize -size 8g /tmp/Mavericks.sparseimage
    hdiutil attach /tmp/Mavericks.sparseimage -noverify -nobrowse -mountpoint /Volumes/install_build
    rm /Volumes/install_build/System/Installation/Packages
    cp -rp /Volumes/install_app/Packages /Volumes/install_build/System/Installation/
    hdiutil detach /Volumes/install_app
    hdiutil detach /Volumes/install_build
    hdiutil resize -size `hdiutil resize -limits /tmp/Mavericks.sparseimage | tail -n 1 | awk '{ print $1 }'`b /tmp/Mavericks.sparseimage
    hdiutil convert /tmp/Mavericks.sparseimage -format UDTO -o /tmp/Mavericks
    rm /tmp/Mavericks.sparseimage
    mv /tmp/Mavericks.cdr ~/Desktop/Mavericks.iso

  • How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

    How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

    Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
    If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
    you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

  • Delete a Catalog and Start Over?

    Is there a way to delete a catalog and start over?
    Thanks,
    Holly

    Just go to File->Catalog->New and create a new catalog.

  • I have 2 different iCloud accounts and would like to delete the account where I have purchased paid for extra iCloud data storage.  Can I transfer this additional storage over to my other account?

    I have 2 different iCloud accounts and would like to delete the account where I have paid for extra iCloud data storage.  Can I transfer the data storage over to my other account?  I am trying to get my iCloud and Apple account with same user name.

    You'll have to contact Apple about that.
    Their iCloud support page indicates you cannot merge or transfer iCloud accounts.
    What do you mean by, I am trying to get my iCloud and Apple account with same user name.

  • I currently have an old work phone that is synced to my iPad. I would like to delete the old work phone number from my iCloud without having to contact my previous employer. Is there a way to do this and replace it with my personal iPhone?

    I currently have an old work phone that is synced to my iPad. I would like to delete the old work phone number from my iCloud without having to contact my previous employer. Is there a way to do this from my ipad and replace it with my personal iPhone?

    Hi Ktchast,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    An Apple ID is a user name you use for everything you do with Apple. Creating an account for an Apple service, such as the iTunes Store or the App Store, creates an Apple ID. Apple ID allows you to access other Apple services. You don't have to create a new account for each service—just use your Apple ID.
    How do I change my Apple ID Name or personal information?
    You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
    Cheers,
    - Judy

  • I WOULD LIKE TO DELETE MY ACCOUNT OR SOLVE THIS TROUBLE PLEASE SEE THIS

    VERY URGENT (MY EMAIL IS PLENTY OF THESE QUESTIONS
    This is for the administrator(s)
    I Am receiving from your forum site many of THESE:
    aemme,
    You are watching the category "System Management and Integration", which was updated Nov 11, 2010 4:32:18 AM by Lichti:
    <http://forums.oracle.com/forums/category.jspa?categoryID=201>
    or
    <Data Integrator
    or
    <Use Oracle DB user function
    For your convenience, the new message is included below:
    I would like to delete my account or solve the problem in another way, as you like.
    I can't delete my accountr from the control panel, I don't know how to do it.
    PLEASE HELP

    Yes now the problem seems to be solved.
    But really this morning my email account was plenty of these ...questions.
    Be careful because....privacy ... and so on...
    A last question, before I was used to enter into Database >> SQL and PL/SQL how can I get there???
    :)))))))))))))))))

  • I would like to delete the remainder of cent in my account please ?

    i would like to delete the remainder of cent in my account please ?

    Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
    When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
    I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
    The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

  • HT1688 My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can del

    My phone is trying to send an email that it can't send. The message is in the Outbox. I would like to delete the message but as long as the message is trying to send it, I am unable to.  Is there any way to tell it to stop sending so that I can delete it?

    Thanks - the only thing is for a long time it would not allow my to select Edit - I tried it but - what ever - this time it did - THANKS - Mark

  • Easiest way to delete TM backup and start over?

    I have one firewire drive serving as TM backup for 3 different computers.
    For my G5, I just want to erase it's entire TM backup and start over.
    Can I simply delete the MyG5 folder inside of backups completely, empty trash, and start over like that WITHOUT causing any problems for the TM backups of my other computers on the same firewire drive?
    Thank you

    Think that should work. It worked for me. I had been having all kinds of problems using 1TB TC. My set up was slightly different, but essentially I deleted the backup and started over, here is what I did:
    switched off airport and connected via patch cable(ethernet cable, checked connection speed it was 1Gbit/sec.
    accessed the disk via finder
    located the sparse disk for my computer
    selected it, hit cmmd-delete. You get a warning it will be deleted immediately.
    Hit ok
    once it is deleted, simply set up TM again on your computer.
    Kept the wired connection for the first time though.(firewire is better of course)
    My deleted back up was 94GB, it took about 3-4 minutes to delete.
    It took about 30 mins for the first backup, size was 19GB first time

  • Problem deleting a game and starting over

    I use an iPad 4, and am kinda new to this stuff, so let me shoot out my question here :
    I recently installed the game  "Hero Hunt" by Grey Area Labs, and since i made some mess ups in it, i am unable to continue playing it further, and i reached the point where i have to delete it and start it over, but am unable to do this since Game Centre keeps tracks of my progress in the game, and even if i re-install it, i continue from where i left off. I tried changing my Game Centre account too, but even if i install the game on a new different Game Centre account, the game still recognizes my old content (Is the game info stored on my iPad ? ) So is there any way that i can access the game from the starting ? Any help would be greatly appreciated. Cheers!

    Hello there, VenomReturns.
    Great job on troubleshooting with the steps you've done so far. The following Knowledge Base article offers some additional information on where to find assistance on issues with your app:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do I delete a network and start over with no wired computers??

    I've been trying forever to delete my parents network...it has a WEP I can't remember, and I just want to start from scratch.  I've tried reseting the router...I've even called a Linksys tech, and even she was baffled.  I have no wired computers...Can anyone help???

    The only thing you can't do is upgrade the firmware.
    That being said ... I have to assume you are using Windows XP and windows is managing the wireless network connections.
    If any of these assumptions are false, my advice may not be as helpful.
    Step 1. Delete all networks from the Preferred Networks list.
    - open the wireless network connections window (double-click on icon in task bar)
    - click on Advanced tab (bottom left)
    - select each network that is shown and delete/remove it (can't remember what the button is called)
    Step 2. Reset the router.
    - unplugging the router does not accomplish anything here
    - locate the reset button ... press AND hold for at least 5 seconds
    - once you release the button, various lights on the front panel will flash as the router boots
    - when you have a steady green for power, look to see if you have a green light for WLAN
    - if the wireless is turned OFF by default (no green light for WLAN) you will have to find a way connect wired for at least a few minutes to turn it on (take it to a friends, bring the friend to it ... whatever works)
    Step 3. Setup the router for secure wireless.
    - if the WLAN is lit after resetting, you should see a notification on the computer saying "one or more wireless networks are in range"
    - click on that notification and find an unsecured network called linksys (if there is more then one, pick the one with the highest signal strength)
    - once you connect to that, open Internet Explorer and in the address bar type 192.168.1.1
    - the user name is left blank and the password is admin
    - change the password (under the Administration tab)
    - under the Wireless tab change the SSID name
    - under the Wireless Security tab choose WPA-shared key (better the WEP) and a phrase
    - once you apply the changes you will lose your connection
    - go back into the wireless network connections window and you should now see a secured network with the name you picked
    - try to connect to it, a dialog will appear asking for encryption type (WPA-shared key) and phrase
    - once you have successfully connected windows will automatically set up that network as default and connect to it whenever it is in range.
    Let me know if any of this is ?!?
    Dan

  • I bought a movie on itunes and it is fully downloaded. I tried playing it and it would play for a little bit and then freeze. I would then shut my computer down and start over. However, after the movie that was downloaded, I could only access the extras (

    I  bought a movie on itunes and it is fully downloaded. I tried playing it and after a few minutes, my computer would freeze. I then shut down my computer and tried to start over. However, all that I am able to play is the movie's extras (deleted scenes, backstage pass, etc). I need to know why this won't play because I paid $15 for the movie. Help

    How to report an issue with Your iTunes Store purchase

  • I would like to upgrade hard drive and start with clean OS how is this done?

    I have a mac book pro and would like to install a new hard drive with the latest OS. I dont care about previous data just a clean start. What is then best method to this approach?
    Thanks!!

    Command R you have access to Disk Utility and the OS install.
    http://mashable.com/2013/10/23/clean-install-os-x-mavericks/
    check your compatibility
    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

  • Can two Macbook Pro's share the same Itunes folder(all media in Ituens) on an external drive (like Time Capsule)? How and what issues may arise?

    Hey, I have two macbook pros (250 gb). They are both running out of space. My first thought was to share an iphoto library off of Dropbox or our Time Capsule. But, I heard that if one file gets corrupted (interenet cuts out, for example) then the whole library gets corrupted. Well, we're full again and now I am wondering if I could move our Itunes folders to our Time Capsule, sync/sort them both so there won't be any duplicates and then use this as a shared itunes library. So first, is this possible? Both computers share the same itunes account.
    Second, if I do, and I purchase a song, show, whatever, does it automatically be added to the itunes library on our Time Capsule and then it is available for both computers to access? Or do  I need to "import" it on both?
    Third, does the "file corruption" issue listed above pertain to itunes?
    I saw a discussion about this but it was form 2008. I am sure things have changed a bit since then.
    Thanks for the help!
    jbh

    No.

Maybe you are looking for