My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".

My Dell Inspiron 1525 laptop is USB connected to my Canon Pixma MX392 multifunction printer. Though the
printer is functioning properly in all respects, a message is showing that my laptop "cannot detect" the printer.
At the same time I'm receiving a message (wizard?) "Found New Hardware - Windows Needs to Install Driver
Software for Your Universal Serial Bus (USB) Controller". My Printer folder shows my Canon is "ready",
and the Port is shown as "USB..Virtual printer port for Canon MX390 series Printer". My Device Manager
folder lists the Canon printer and fax under "Printers", and under "Universal Serial Bus (USB) Controllers"
are listed: MX390 series (1 time); Universal Serial Bus (USB) Controller (7 times); Unknown device (7 times);
USB Printing Support (2 times). I've tried unistalling and re- installing everything associated with the printer,
but get the same results. As I've stated the printer is functioning fine, but the "incessant" appearing of the
message, "Found New Hardware, etc." is extremely annoying. When I follow the "wizard's" instructions to,
"locate and install driver software (recommended)", I'm finally told to" insert the disc that came with your Universal Serial Bus (USB) Controller". I don't have any discs that came with either the printer or laptop. Is
anyone able to make any sense of this...and, hopefully, offer help in getting rid of the "Found New Hardware"
message. Many thanks!

I'm not sure the error is related to your printer.
http://www.tomshardware.com/s/install+driver+universal+serial+bus+usb+controller/
Have you tried going to the Windows Update software program and seeing if there are any udates related to your message?
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

The computer is not seeing the usb connection to my canon Pixma IP 90 the USB port states Generic US

my computer shows generic usb hub and does not recognize my canon Pixma IP 90 printer when pluged into the usb port how to configure the usb port

you're in HP forum ....hehehe
not Canon...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Can't connect to wireless network with Dell Inspiron 1525 with Vista

I set up a wireless network about a week ago, and have made it with the following security features: WEP, enable only certain MAC addresses to connect, and disabled broadcasting the SSID. I have been able to use it just fine with my Mac computer using airport, but when I have tried to connect my roommates computer, a dell inspiron 1525 with vista, it can't connect. I can locate the network but when I try to connect to the network, I get a message saying that for an Windows cannot connect to the network and that the Wireless association failed due to unknown reasons. It then says to connect with your administrator, but that is me. I have a minimal knowledge of computers just enough to be dangerous and am basically figuring this out as I go along. If anyone has some advice for me, both my roommate and I will be very grateful.
Thanks,
- Jill
Solved!
Go to Solution.

Sorry I am not sure if this is needed but I am using a WRT54G router ver.6.

Dell Inspiron 1525 Problems

Hello.
I just purchased a Dell Inspiron 1525 with Vista Home Premium preinstalled. I wanted to know if there is a way to install a fully working Arch Linux system on it. I tried with 2007.08 CD only to fail at getting the wireless card to work. Dell Inspiron 1525 comes with a Dell Wireless 1390 WLAN Mini Card. I tried installing both the latest vista and xp drivers for this card via ndiswrapper. I thought all was well since I got the message that said that the driver is installed and the device was present. However, when I checked iwconfig, the normal 'wlan0' was not in the list, just 'lo'. Can someone help me with this?
Also, I used a ZenWalk liveCD to test out if I have sound support. It seems like the sound doesn't work either, but that may be because I used an old liveCD. The 1525 comes with a 'SIGMATEL STAC 92XX C-MAJOR HD Audio' or also known as "High Definition Audio 2.0".
I have also learned that although Dell does offer this laptop with Ubuntu installed, they changed the wireless card on the ubuntu version. I don't know if that means anything. Also, I have heard of many who have gotten linux installed on this laptop. I have some experience with linux, but all of that is with a desktop pc. (Used Arch for the longest after trying out Gentoo ^^)
I checked the Ubuntu forums on this matter, and they seem to have a lot of documentation on it, but I am unsure if it will apply to Arch. Does Arch come with the bcm43xx drivers? If it does, then that means I have to blacklist it or something. I really need help.
- Dennis ^^
PS: Thanks in advance for any help!

Thanks for all of the replies. I downloaded the newest ISO and tried to get it working again. Well, b43 did not really work as I hoped it would, so I went and used ndiswrapper. To my astonishment, it works. Apparantly, something changed from the 2.6.22 to 2.6.24 kernels that made it so that the ndiswrapper module won't be detected with a broadcom card with the 2.6.22 kernel. This is all a guess, but it kinda makes sense. Only one problem though, I did all of the usual steps to set up the wireless connection... and it can't seem to connect to the internet... I did:
iwconfig wlan0 essid ********
iwconfig wlan0 mode Managed
iwconfig wlan0 key restricted **********
ifconfig wlan0 up
dhcpcd wlan0
*I have tried this with other network cards, those on my desktop, and they worked fine.
When I do 'iwlist wlan0 scanning' , I detect all the networks that I expected to see, but it doesn't connect to any of them, which I think is really weird.
I don't really care much for vista, but I miss messing around with a decent CLI, and I will be majoring in Computer Science once I get into college, which would definately include classes on Bash scripting, so I wanted to get a linux install on my laptop since my desktop died. I have experience with Ubuntu, Gentoo (Stage 1 and Stage 3 installs.. Stage 1 was a giant pain and failed the first 4 times), ZenWalk, MEPIS, SuSE, Fedora, Arch, and some others. Of all of these, I liked Arch the best. So, I was really hoping I could get it installed.
Well, it seems I will be stuck with vista for a while... but I must say, it's not AS bad as I thought it would... still slow and all though ^^
@anti-neutrino:
Hello. Dual-booting is tricky stuff in my opinion. I have never done it myself, so I can't really help you there. But, there are plenty of documentation out there on it. According to http://www.goodells.net/dellrestore/mediadirect.htm, DellMediaDirect is installed on a hidden partition. So, I'm guessing that as long as you don't touch that partition, it would still be there. What I think you would have problem with is where to put grub (or lilo). The safest thing to do, I would think, is to place it in a floppy, if you have an external floppy drive, or place grub into a USB Flash drive which you would be able to boot from. I have no idea how to do this in Arch, but I have done it before in SuSE. And as for Vista, as long as you don't touch the vista partition, it should stay the same. The booting is the only problem I can see for you. If the boot loader (grub or lilo) is installed in a separate medium (floppy/USB) then to boot into the linux partition, all you would have to do is boot from the medium, eitherwise, it would boot into Vista (or whatever you have that boots up first) automatically.. that is unless they changed something, and knowing how fast linux is developed, there are a lot of changes, so I'm not really sure if it still works this way.
@Warper:
I don't really mind the sound right now. If I can get internet to work, I know I can solve all the other problems later, as all I need to do is look up how to solve for it. But, yeah I know sound is muted by default in Arch. It's just that with my desktop, sound was automatically detected by other LiveCD's that I was confused when those same LiveCD's couldn't detect it. Again, this might just be that the LiveCD's use an older kernel.
- Dennis ^^
PS: I reinstalled vista and wrote this post in it. T_T
Last edited by skittlehawk (2008-06-06 23:30:16)

Dell Inspiron 1525 ...(Ergent Ergent ...)

Hi,
I have a dell inspiron 1525 laptop .
Is it compatible to install RHEl 4.0 and then oracle apps 11.5.10.2
ram 4gb
hard disk 160gb + external hard disk
BIOS drivers/software is provided by dell
Regards,
Shiva

Hi,
free ip addres?
In the host vista machine
when seeing network connections I have seen 2 connections
1.192.168.254.1
2.192.168.10.1
I selected the bridged network but not given any ipaddress.
How to assign ip to the 2 os and i want to get connected through putty to the rhels.
Regards,
Shiva

Dell Inspiron 1300 laptop wont connect to router anymore

Eveything was great untl I had to change the encryption code on the router, now I cant get the laptop to connect to the router anymore. Nothing was changed on the computer and the only thing that was changed on the router was the encryption code. The Dell laptop has a 1370 mini wireless card in it running windows XP, and I updated it last night to the latest driver. My Dell Inspiron 1525 laptop has no problem connecting to it. The wireless router is a WRT54GS. I have also started wireless zero configuration and checked the box to let windows control my wireless. And the box in properties that says "Enable IEEE 802.1authentication for this network" is not checked.
Sometimes when I try to connect it, it will say connected when it isnt connected to anything. Other times when I try to connect it will connect to another wireless internet in the neighborhood that doesnt have any encryption. And then other times I get the message that says "windows was unable to find a certificate to log you on to the network". I got it to connect when I took the the encryption off the router but for some reason it doesnt want to connect with encryption on it. I am using WEP 64bit. I checked all the settings on both the laptops and the wireless settings are exactly the same. I dont understand why mine will connect and the other one wont. Any ideas?

You can try manually adding the network on your computer, Also change the SSID on the router if it is linksys(default).
To add the network manually try the below mentioned settings.......
Click on Start and go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection disable it and then Re-enable it .
Right click on Wireless Network Connection and click on Properties,Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/security key, make sure you enter the correct network key and confirm it...
It will connect...
That should resolve the issue for you.

HP ELite L2201x and Dell Inspiron 1525 laptop?

Hi, I bought an HP Elite L2201x Monitor, and I want to connect it to my Dell Inspiron 1525 laptop.
I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
Any advice? I thought about using the port I use to conect to a proyector, but idk if that makes sense at all!
Thanks for your help!!!

>I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
display port and HDMI are two completely different solutions.
Also a display port source can deliver hdmi signals (so this way the cable will work), a hdmi source often (always?) can't support dp signals.
This is how I understand this FAQ:
From http://www.displayport.org/faq/;
Q: I am the owner of a new 27″ iMac, which I was planning to use as a high- resolution display for an HDMI equipped Blu-Ray player. I have purchased the DP-to-HDMI adaptor after being advised by Apple technical that it would function as an input, but having tried it, discovered that the device will only OUTPUT. My question is, why won’t the adaptor pass signal the other way, and what is the adaptor doing if it’s not powered, and it’s tiny, that it can’t do backwards?
A: DisplayPort-to-HDMI adaptors and DisplayPort-to-DVI adapters are very simple and only operate one way. For instance, when a DP-to-HDMI adaptor is connected to a PC that supports DP++ (multimode) capability, the PC senses the presence of the adaptor and sends HDMI signals over the DisplayPort connector rather than DisplayPort signals. No signal conversion is performed by the HDM adaptor. HDMI signals are merely passed through. The unique DisplayPort adaptor capability enables the PC to connect to a variety of displays via the DisplayPort connector including HDMI, DVI, and VGA. VGA adaptors are more complex and perform active signal conversion from DisplayPort to VGA. These adaptors also operate only one way. Unfortunately, HDMI does not support conversion to other display formats as does DisplayPort.
HTH
V.
*** Say 'Thanks' with Kudos ***

Dell Inspiron 1525

I have a Dell Inspiron 1525 (laptop) dual booting Vista and Solaris with GRUB. Yes, I read that Vista won't boot with GRUB. But when the machine rebooted so I could fix the MBR, it just worked. So, I didn't need to use BCDEDIT (and such).
All is well (in Solaris) except:
1) Audio
2) Wireless Net
3) Net
4) WebCam
1,2,4 are nice-to-have(s) for me. But, #3 is a need. I've read thru docs and installed the SKGEsol driver for the Marvell device. However, the device will not show-up in ifconfig. see...
http://homepage.mac.com/shaffer.david/dell_insp1520_net.tgz
[dump of commands and such]
Any advice is appreciated. And any info on #1,#2, and #4 is appreciated as well.
The device break-down is..
o Audio [SIGMATEL STAC 92XX]
o Cam [Creative Labs Laptop.. Web Cam]
o Wireless Net [Dell Wireless 1390 WLAN]
o Net [Marvell 88E80XX]
I've mostly searched around for networking; just 'cause it will lead to other things being easier - so I don't have to reboot and such.
Anyway, thanks in advance.
Other stuff..
- Solaris boots much faster than Vista and the drive light even goes off after the login screen shows for a few seconds. In Vista, the booting is slower and even after the login comes-up, the disk light stays on for several minutes (???).
- I was pleasantly suprised to find all of the dt tools including dtksh and dtbuilder.
- Well, there's a lot of cool thing I want to get into with solaris, but no time to type..so..... later

Hi,
I have installed Solaris on my Dell Inspiron 1525 using a USB HDD. I am looking for the drivers for Wireless LAN and NIC.
Can you guide me where i can find them.
Reards,
Gaurav

Dell Inspiron 1525 wiki article

I've made an article to get Archlinux running on a Dell Inspiron 1525: http://wiki.archlinux.org/index.php/Dell_Inspiron_1525
Any comments would be great, I think there is stuff missing but don't know what. :D

Hello.
I have low fps with games in 3D. I can play at good fps in the Ubuntu that I have in my other partition, so I tried to put my Arch's xorg.conf in Ubuntu, but Ubuntu still works even with that configuration.
I use the intel Graphic Card ("GM965/GL96) of the Inspiron 1525 and I was wondering if someone had the same problem.
The xorg.conf is:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
PS: Kwin4 and Compiz works perfectecly and I have my direct rendering configured (or I think so, right now I don't know what to think).
PS2: Why the "hwd -s" of Dheart says that he uses Xorg and the one of Rainbyte says that he uses Xfree86? I wonder why because when I execute "hwd -s" in the Ubuntu system it says Xfree86, but Xorg in Arch.
Well. I'm hope that somebody understood my english and make a better article for the wiki.
Last edited by Vipermaseg (2009-02-01 08:49:24)

Dell Inspiron 1525 wireless issues.

After much frustration with the slowness on Vista, I decided to install Arch on my laptop (Dell Inspiron 1525)
I've been running Arch on my Desktop for about a year now and it's been a while since I've done a fresh install.
The problem is getting my wireless card to operate.
I've tried the wiki and the web and haven't had great results.
my wireless card is a Broadcom BCM4310. I first tried the b43 driver, but it doesn't support the 4310 (it does support the 4309 and 4311. I guess mine got skipped )
anyways, I then tried the ndiswrapper around the bcmwl5 driver. I followed the wiki to the letter to get this driver installed, but I am still not showing any wireless devices.
ifconfig -a shows my eth0 and lo.
ifconfig wlan0 up does nothing either.
I'm stumped.
any ideas?
cyrusm

take a look here: http://bbs.archlinux.org/viewtopic.php? … 29#p331429
don't forget that MOD_BLACKLIST is deprecated and you need to put ! in MODULES
Last edited by wonder (2008-07-09 09:16:22)

Backup "Factory Image" partition on Dell Inspiron 1525

Hi, I have a Dell Inspiron 1525 that came with Windows Vista but would like to install Arch Linux on this computer.
It has a "factory image" partition on the harddrive I used before to reinstall Windows Vista,
but installing linux might overwrite this partition and make Windows Vista un-reinstallable.
Can such a "factory image" partition be backed up on a CD somehow? (like an iso, in case I might have to reinstall Windows)
Last edited by maz20 (2011-04-13 08:27:17)

Sure. Just use dd, or maybe ntfsclone if it's an NTFS partition.
Use "sudo fdisk -l" to find the device identifier of the partition (something like "/dev/sda1").
Then "sudo dd if=/dev/sda1 of=factory_image bs=1M" will copy the partition contents into the file "factory_image".
Be careful with dd, if you write "of=/dev/sda1", it will overwrite that partition without any confirmation request.
You might want to also backup the boot sector (first 512 bytes of the disk) to keep the original boot loader: "sudo dd if=/dev/sda of=boot_sector bs=512 count=1".

My new HP Pavilion desktop has no usb connection option for my old Canon Pixma iP 2600 printer

Greetings:
I can no longer locate the installation disk for my my old Canon Pixma iP 2600 printer. I'm able to install it w/the add a printer feature in the control panel, but the desktop fails to read that the printer is connected via usb cord. I'm not finding any option to install it as a usb printer. Please help asap. I can't afford to replace the printer, and I have several documents I have to print today or early tomorrow, or there will be dire financial complications for me. I NEVER had this problem w/Dell. (the operating system is windows seven, which is exactly what i was running on my older dell model - i have searched this forum and located a similar question, but that querent was able to find a usb option in the drop down menu for port installation. that option is absent in my attempts).
Thank you!
This question was solved.
View Solution.

Firelily, welcome to the forum.
Here is the download page for the driver and the software for the printer. If you install it, you should be able to print.
Please click the " Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

On ipad to hp 6500A printer, message says contacting printer, but does not connect.

New 6500A prints wirelessly ok from vista laptop and desktop. also prints from ipad printbureau app. but when printing direct from ipad email or pic, I get message that it is "contacting printer", but will not go any further to connect

I have the HP Envy--but it's at my studio and I'm at home so I'm going off memory here, and my understanding of networking is,shall we say, limited. But, as the HP Envy is an AirPrint printer, you don't need Print and Share or any of the other wireless printing apps (although I have Print and Share).
I have a WiFi iPad 2. After Setting up the Envy, I just joined a local wireless network using the Envy touchscreen and then joined that same network on my iPad. Then, when I choose Print in, for example, Pages, the Envy appears after the Select Printer option.
All I can suggest is to make sure the Envy has a connection to the same wireless network as your iPad. (in my case I have to select a local network which does not have Internet access as my Envy isn't registered on the university-wide network.)
(I did complete the initial setup of the Envy on my laptop (MacBook Pro) (and which requires a USB cable for setup) and that gave me printing and scanning options from my MacBook. I don't see how that would have any bearing on the AirPrint function from the iPad.)
(I do think that the Envy printer is an amazingly useful little printer, especially with the ability to scan to a flash drive or SD card.)

Can my iMac OSX 10.8.5 connect to my Canon PIXMA 452 wirelessly

My iMac doesnot connect to my Canon Pixma 452 Printer when it has for the last 3 months?

Hello there, lbaer.
The following Knowledge Base article offers up some great recommendations for troubleshooting printer issues:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

Hi, when the itunes finished the downloading for ios 6 , the iphone turned of and shows that i have to connect it with the itunes , i already did but still not working . please appreciate your help

First make sue you are installing the 64 bit version of iTunes.
Second make sure it is iTunes 10.7 or later.
I would download a fresh copy of the 64 bit version of iTunes 11. After installation reboot your computer.
Before connecting your phone reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

My Dell Inspiron 1525 is USB connected to my Canon Pixma MX 392 printer, but is "not detecting".

Similar Messages

Maybe you are looking for