My deskjet switches on as soon as power cable is connected & displays Error codeOXB040209C

As soon as power cable is connected my printer swiches on light flashes & Error codeOXB040209C is displayed no further processes can be selected & computer does not recognise printer. My operating system is windows 7 64-bit

Please follow the instructions here in order and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

If your MBair is a 2012 model, it has a Magsafe 2 power connection. The monitor probably has the old magsafe connection. If this is the case, you need this adapter.
http://store.apple.com/us/product/MD504ZM/A?fnode=5a

Satellite C660-115 WLan connection only works when power cable is connected

Hello,
I bought a satelite C660-115 a few weeks ago. I would like to surf the internet anywhere in my home without any wires/cables.
From the first day I had this problem: when I disconnect the _power_ cable, the wireless connection will stop working.
The webpage on my screen will still be there, but loading a new page is a problem.
Sometimes it helps to reload (pressing F5), sometimes not. It always helps to "repair the ip-adress", but not for long.
The only solution is to atach the power cable, regardless of how much power the battery still has.
When I do so,there is no problem whith the connection at all.
I went back to the shop where I bought it, they connected to their own wireless network and they had the same problem after a few minutes. In the shop too attaching the power cable solved the problem.
So the problem must be in my lap top, not in my network (modem or so).
Does this all sound familliar and if so, how can I fix it?
I hope my English is understandable, I live in Holland.
Thanx in advance!

Here the solution:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59177
Change the Power Save options for Wlan in Win 7 power managment

My Macbook air (only 2 months old) has a black screen and I cannot see to get signed on, the keyboard seems to be on as I can see via having put on the Caps key which lights up and also the power cable when connected is at green how do I fix this?

I have been faced with a Black screen this morning when I have gone to sign in/open my Macbook air this morning. I can see that the keyboard seems to be on as the caps key when pressed is lighting up as is my charger cable link, however have noticed that the apple logo is not lit up. Any thoughts?

Try resetting SMC and NVRAP and then reboot.
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/PH4405
Try booting the Recovery Partition. Power off, boot and then hold down the Command and R keys. Is the screen still black? If so it is not a software problem so take it in for diagnosis and repairs. Make a Genius Bar reservation http://www.apple.com/retail/geniusbar/ or find an Apple Authorized Service Provider https://locate.apple.com/country .
If you are running Mavericks try upgrading to 10.9.2. It has a fix for black screen problems.

Does the power cable from my 24" CinemaDisplay have to connected for the display to work. I just had it repaired and now it seems to have to be plugged into the laptop I dont remember it being like that before.

Is the power cable from the display required to be plugged into my MBP for my display to work. Recently had work done on the display (power supply replaced twice, glass replaced twice). Also since I got it back from repair my system goes to sleep sleeps even though I have it set not to. Frustrated

awesome, so you sound like you know what your going on about. im guessing its a Software fault tbh, because its like the phone is dead.. very upsetting..but with it not being the screen if they dont ask me to replace it and to send it off for repair what can i say as to a loan phone, mind a ease a little bit now i will just now wait for tommorrow to see what happens thank you

New HP Pavilion dv2000 power cable?

I was wondering if it were possible too find a replacement power cable for my laptop...the old one has broken at the end and, well, no power cable means a dead battery with no way too charge it any help on aquiring a replacement would be greatly appreciated! ive looked through the computer supplies section of the HP website but i havent found anythnig :l

Kennyp wrote:
I just purchased a new hp Pavilion dv7-6c95dx last week and now I can't get it to power up even when the power cable is connected to it. The only light that comes on is an orange or red light where the power cable connects to it. Any suggestions as to whats wrong?
Hmm.. I experienced this once. I accidently touched the metal part inside of the USB slot with my microphone jack (its built very close to it) and the computer just shut off and wouldnt turn on.
How I fixed it...
I removed the battery and adapter so there was no power supply to the notebook. I held the power button down for 60 seconds to drain any remaining battery. I put the battery back in and then plugged in the adapter. I held the power button down again for 5 seconds and it started. If this doesnt help, i don't know what will.

Grey screen with message "turn off computer with power button until switch off then press again power button"

Dear all,
I'm very hungry with my iMac and my Time Capsule :
I try for two weeks to restore my iMac without any success...
I wait 80 hours to finally have the message again and again : "to restart your computer : turn off computer with power button until switch off then press again power button".
But my iMac do not work !
Could you help me?

Hello, that's a kernel panic...
http://thexlab.com/faqs/kernelpanics.html
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X 10.6 Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Power cable for HP Deskjet 3070A

Where can I buy another power cable for my HP Deskjet 3070A?
Thanks.
This question was solved.
View Solution.

Hi ngurung,
Check with the HP Parts Store. The phone number is 800.227.8164.
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

HT201401 i am unable to switch off iphone with the power on/off button.

i am unable to switch off iphone with the power on/off button. Though I can feel the sense of the button, but it doesnt work.

If there is Warranty or AppleCare make Genius reservation or set up service and take or send to Apple for resolution. If no coverage, Apple charges $199 for Replacement iPhone 4S. You can use Assistive Touch. Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can be used to turn iPhone OFF, hold down on the Lock Screen icon until "slide to turn off" appears. To turn iPhone ON, connect to power, charger or USB port of computer.

My phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??

Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Macbook powers on by itself when i connect the power cable

Hi,
Since Leopard, my Macbook has decided to no longer rely on the stupid user pushing the power button. It simply switches itself on every time i connect the power cable
You know: I often come home in the evenings with a drained battery, connect the cable and charge the battery overnight. I don't want to switch the baby on. But my Macbook thinks otherwise.
First i thought it maybe have somthing to do with the hardware-energy settings (power on after power loss), but the option is disabled.
So what? Has the Macbook become more intelligent or am I just to stupid to find the right option? (Care what you say..!)
Cheers,
Fox

Hello World!
No one here who can help me?
I simply want to use the Power Button for what it is for. I don't want my Macbook to switch itself on everytime i plug in the power cable.
This behaviour is only since 10.5 install (I did archive&install)
Fox

[845 Series] 845E MAx2: CPU cooler and power supply stop when power cable plugged in to HDD

Board: MSI 845E Max2
BIOS: 6398E V.1
UPDATED BIOS: 6398IMS V.5.7 040203
CPU: Intel Celeron 1,7GHz
RAM: 512GB Infineon
Power: ATX 300W
Hard Disks: WD and Maxtor 10GB-30GB
Hi all,
whenever I plug in the power cable to the hard disk computer shuts down after 2-5 seconds. If I try to start it again nothing happens. So I need to plug off and on the ATX-connector again so that the power supply works and the CPU-fan spins. However, as long as a hard drive is attached (it does not even need to be connected to any of the IDE-controller; having connected to the power supply is sufficient) it shuts down.
Following tests were done:
1- other hard disks were used
2- other power supply resources were used
3- computer was started with short connecting the power switch through the respective pins
Still the same result. If no hard disk is plugged in, system starts fine.
So I flashed the bios to A6398ims.570 without connecting the hard disks (since no hard disk drives were available the win98 start diskette created a c drive in the physical memory - afaiu - and I flashed the bios via this generated c drive). But nothing is changed!
Does anyone have an idea?

Hi again,
after reading the PSU guide I used a HDD which was 20GB (an older one of app. 4 years) and system booted normally. It seems that the PSU of 300W was having a difficulty of serving the relative newer HDD with power. I will test it with a min. 400W PSU and let you know if the problem is completely solved.
Thanks for your helpful comments.

Bootcamp Windows won't display without power cable attached

Hey guys, I have a strange problem and I don't know when it first arose.
I have a MacBook Pro which I use a VGA adapter to have 2 monitors running (my laptop screen and the extra monitor). This runs fine in OSX.
When I try to use the same set up in Windows I get weird results. It works fine while I have the power cable plugged in. When I remove the power cable only the secondary monitor shows and the laptop's monitor powers down. If I don't have my VGA cable plugged in and try to run Windows with just my laptop screen, I can only get the screen to display while the power cable is in. As soon as it remove the power cable, my laptop's monitor powers off. It comes back on when I reattach the power cable. When I have the power cable in and the VGA cable in, both monitors display fine
Does anyone have any idea what this is about? I reckon its something to do with starting to use a 2nd monitor on OSX, but I have no idea where to start.
Thanks in advance!

Since I heard other people had DVI
connections working, I tried that, and it worked.
Then, I plugged an analog monitor back into it, and
that worked too! Seems like it just needed a kick
(weird).
I too have tried all manner of combinations and restarts to get Windows XP output to SVGA data projector. I get picture during windows start up and then it disappears - never to return once XP has loaded.
What order do you use to link up all the bits? is there a way to toggle external monitor in XP via boot camp on a Macbook Pro?
macbook pro Mac OS X (10.4.6) 2 GHz, 2 GB, 7200rpm

My macbook will not charge and turns off completely when I remove the power cable. can anyone help?

The battery is sitting at 75% and has not moved even though it is plugged into the mains. It will not switch on unless connected to the power cable and turns straight off when disconnected. The wee green light is on the cable is on when plugged in so its not the power cable. Could it be my battery? the I only bought this two years ago.
Please help.

You posted your question in the "Intel iMac Forum". You should repost it in the appropriate "MacBook Forum" in order to get an accurate response.

My deskjet switches on as soon as power cable is connected & displays Error codeOXB040209C

Similar Messages

Maybe you are looking for