My device does not give clear audio. voice and music are defected
my device (Compaq Presario CQ40-314TU Notebook PC)does not give clear audio. voice and music are defected
Ahh, yeah, that's probably what happened then. Once you re-enable your service, you should be all set.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!
Similar Messages
-
Photo clicked with flash does not give clear image
photo clicked with flash does not give clear image
I did some more testing with this, and it appears to be a Gmail problem with iOS iPhoto.
I called Apple support, and this issue was escalated to engeneering.
When sending photos from iPhoto for iOS via Gmail from the iOS device, only the small and medium sized photos can be opened in Mail on the iOS device. The large and original photos do not open in Mail.
This occured across different devices I tested, including iPad 2, 3, and 2 separate iPhone 4S devices. All were updated to the lastest firmware. iPhoto was uninstalled, and reinstalled.
When sending and receiving photos from iPhoto for iOS via iCloud me.com email servers, all the photos of different sizes could be opened in Mail fine on the iOS devices.
It appears that Gmail servers somehow change the way the photos are encoded, and make them not viewable on the iOS device. Very disappointing, since the native Mail program has no problem, and photos sent via gmail or other are fine.
Another iPhoto for iOS glitch! -
My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch. Any ideas?
Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums. -
App World - Sorry, your device does not meet the system requirements that are needed
Hi, I’ve just got a blackberry which is my first. I am new to this. I'm trying to download the App World on my phone because I would like to get some applications on my phone. As I try to download the App World it says "Sorry, your device does not meet the system requirements that are needed to support Blackberry App World." I have tried to download this on my computer Via Cable and on my Blackberry Via the Browser. If this doesn’t work for my blackberry is there any way around this so I can download applications from somewhere else.
Network Provider: 02
Network Plan: Pay As You Go
Thanks.Hi, thanks. Is this something my provider can activate free of charge or does this come at a monthly payment?
Can someone provide a bit of information about this please.
Thanks. -
HS-700 - Microphone? Device does not hear any audio
Brand new out of the box. Does not respond to voice commands.
No callers can hear me
Are the mics defective? Did I miss a step?
I can hear the unit, I can hear callers.
Paired with Blackberry Curvewhich curve are you using it on?
i think the HS 700 does not support OS 4.5 on older curves
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
Dear community, I'm experiencing a problem since 2 days, that if I sign in in my iTunes account with my Apple ID on my iPhone it doesn't show at the end if scrolling down the ID details and credit anymore. If I try to download songs I bought once but which are not on this device anymore, it asks me 3 times for the ID and password. I fill it in but at the end nothing happens. I see only in the middle a moving symbol.
What can I do? Apple ID and password are correct . I canceled all settings but same as before.
Many thanks in advance.AJ Green wrote:
My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing. You need to enable location services.
Your wifi-only iPad does not have GPS. Read the specs for your device. -
Today, try to update, sync.... my ipod. When plugged it into my computer and opened Itune, my device never shown on the left side of the screen as it used to! Can not find it anywhere????? Could you give me a tip on this matter.
Hi there atangney,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
T40P ACCESS IBM BUTTON DOES NOT WORK AFTER INTIAL OPENING AND MUSIC PLAYS ????
Hello, from a very un-savy laptop and computer user,my T40P thnk pad doesnt work when you push ACCESS IBM BLUE BUTTON,??Ive tried to uninstall some of the IBM componets,But not haveing a real clue as what to uninstall ,i i did uninstall a few that a earlier post reply suggested,.?then i downloaded the programs again and ,still nothing works corectly,Im going to paste a list of installed IBM programs in this message ,so that if someone reads this ,they will see what i have and the versions too.Any help on this would be a real blessing ,im lost as far as being- A computer repair tech goes,Thank you in advance for any reply post to my problem,.Thank you ,what a great fourm to be invloved with,
Computer Name: TOMS
Computer OEM: IBM
Computer Model: 2373G5U
Serial Number: 99YHKN3
OS OEM: Microsoft Corporation
OS Name: Windows XP Professional
OS Type: Windows NT / 2000 / XP
OS Version: 5.01
OS Build: 2600
OS Service Pack: Service Pack 3
System Enclosure: Notebook
INSTALLED IBM SOFTWARE:
Package Name: Access Support
Version: "en2.0.61"
Package Name: AccessIBM
Version: "4.03"
Package Name: EasyEject
Version: 1.00.000
Package Name: eGatherer
Version: Unknown
Package Name: IBM Access Connections
Version: 1.00.000
Package Name: IBM ThinkPad Keyboard Customizer Utility
Version: 1.1.0
Package Name: IBM ThinkPad UltraNav Wizard
Version: "1.10"
Package Name: IBM TrackPoint Accessibility Features
Version: 1.00.000
Package Name: IBMPM
Version: Unknown
Package Name: Messaging
Version: "1.0.5.8"
* Version: ""
Package Name: NPdirect
Version: 1.00.000
Package Name: QConnect
Version: 1.00.000
Package Name: ThinkPadSoftwareInstaller
Version: "1.03.0301"
* Version: Unknown
Package Name: TPHOTKEY
Version: Unknown
Package Name: TpKmap
Version: Unknown
Package Name: TrackPoint
Version: Unknown
MODEL OF THINK PAD, IBM 2373-G5U T40PHi Tom. I just went through the same issue with my T42p. After uninstalling/downloading/reinstalling the Access IBM software it still didn't work so I found my way here. At first my visit didn't seem promising but I did a search of the forum for Access IBM and found a post in which somebody suggested installing the ThinkVantage System Update utility. I did that, rebooted and accessed the utility through the start/programs menu and installed 3 critical updates, rebooted again, et voila, Access IBM is fully functional. I've since gone back there a couple more times and am in the process of doing a fairly large download of optional updates. It appears to be a cool utility that even allows for setting up automatic updating. Kudos to whoever posted that link.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
At least I'm fairly sure this is where I went to download the thing. Took a couple of tries to successfully flash the bios but all seems fine now. If you do decide to do this and also to flash the bios do yourself a favor and have your machine plugged into your AC adapter with a fully charged battery *before* you start that particular drill.
Luck
-joe
Joe T42p (T2373C96), T60p (8743FKE5) -
TS4079 Siri is not picking up my voice and Siri is not talking back after ios7 upgrade. .?
I have tried to use Siri after upgrading to ios7 and now the ring just spins with suggestions of what to ask , but Siri does not pick up my voice and Siri does not speak back.
I have internet connection , I have done a phone reset etc etc , it was working fine before the upgrade , any ideas please.?
Also have the language set to uk english ..
Upgrade to iPad 4 worked fine , just the phone. (Iphone5)ok, got the same problem! here is what i tried and found out:
ok, now i tried again a factory reset and it didn't help...
Also tried a reset with restoring from an icloud backup! Didn't help...
Switching Siri off an on, didn't help
Switching off Siri and reseting the iPhone (holding down the power- and the homebutton till Apple logo) and then switching back on, didn't help...
Using Siri with the headset, working!
Using raise to speak option working also! So only the Homebutton activation does not work!
Called the support, the answer is: Buy a 35 € protection plan or help yourself... -
Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21
Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21
-
Q10 does not appear as audio device on pc
New pc, windows 8.1 and when connecting my BlackBerry phone via bluetooth, it does not give me an option to play music from phone. It does connect though and I have tried other devices- all works fine with both, pc + other devices and BlackBerry + other devices, just not those 2 together.. any idea?
Can you see the devices heading in the side bar? If you are using iTunes 11 and can't see the sidebar go to View>Show Sidebar from the iTunes menu.
iOS: Device not recognized in iTunes for Windows -
I have just bought apple tv which allows me to play music through airport express but when chose to watch a movie the audio comes from the tv and does not give option listen through other speakers served through airport express. Can you help me ?
No, you cannot seperate the audio and video stream.
You can use optical audio to a sound system (I use sony sound bar) and play the audio via that.
jules -
I go to Settings>Activate Device and it gives me a code but does not give me a page to log in. Any advice?
I'm sure you figured it out by now, but I ran into the same problem. I found this on the HBOgo site. This help me.
1) Launch HBO GO on your device.
2) Navigate to the 'Settings' tab.
3) Click the 'Activate Your Device' button - the next screen should show you your activation code.
4) Navigate to www.hbogo.com/activate.
5) Select Apple TV from the device drop down list.
6) Select your TV provider.
7) On the Activate a Device screen, enter the code displayed on your television (from step 3), click the 'Activate' button.
8) You should see a 'Success!' message on both your television and your browser. Until the 'Success' message appears on your television screen, you will not be able to watch a video.
9) You are ready to start streaming video on HBO GO! -
Internet Connection - Your Apple wireless device does not have a valid IP.
I just bought an Apple TimeCapsule and set it up normally, following instructions to my Arris cable network on the Videotron provider here in Quebec, Canada. The TimeCapsule did appear as a wireless device on my MacBook Pro (after updating the AirPort software from the provided CD - as was instructed). I went through the whole installation process to obtain at the end this error:
Internet Connection - Your Apple wireless device does not have a valid IP.
The only provided instructions were to check the cable and then contact your Internet provider. Well it seems clear to me that if I contact my provider and say that the internet connection works fine directly on my computer, also fine through my "normal" wireless router but not with my new TimeCapsule, I won't get much of a response.
After a lot of research, a friend indicated the solution in my case.
You have to really reset the cable modem to convince it to start giving out IPs again.
To do this:
1. Unplug your TimeCapsule (possibly you might have to reset to factory defaults - see the documentation)
2. Unplug your cable modem
3. Reset your cable modem by pressing the reset button with a pen (or something) for several seconds.
4. Plug your cable modem back in and let it reboot/restart - until the lights are back on.
5. Plug in your TimeCapsule
Everything should now work and you can restart your AirPort set-up on your Mac.
Good luck!My ISP is AOL. The service is DSL via a broadband modem. Somewhere during the setup process there appears to be a communicatiosn issue between the Airport Extreme Base Station and the DSL modem. When I hook the DSL modem directly to my iMac I can connect to the internet without any issues.
I tried the factory reset and the DSL modem reboot process described in other posts and seemed very close to success...until the internet setup step. That is where this issue first presented itself. -
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing!
Maybe you are looking for
-
How do I forward a message to another contact or email it?
-
I've updated a web page and now the links will not open in any browser except safari
I've updated a web site and the links no longer work. I'm using Dreamweaver. The page works perfectly in Safari but not in Explorer or Firefox and I don't know what to change to fix this. == not sure what to add here
-
CSV output = Yes, but link not displayed
Hi, Anyone encountered/know how to fix this one? I've a report in an SQL Report region with CSV Output = YES, but the link label is not displayed. (CSV link is displayed OK on other reports). Thanks John D
-
Hi. Are there any log files to delete manually periodic? I know the log files are deleted by standard delete job scheduled in Tr-cd SM36. How about the JOB log, and audit log? regards,
-
Transfer transaction AR, AP, Misc Receipt to Cash Management Module
Hi, is there any program i should create to make transaction ar, ap, misc receipts are transferred to cash management ? and what the steps to transfer ar, ap, etc to cash management ? thanks