My  device  is not turning on

my ipod 4h gen not switching on , ,

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer                 
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • Hi, i woke up nd my device will not turn on . ive tried the home and unlock button, my phones on a charger also but the battery wont pop up. just a black screen. What do i do ?

    hi, i woke up nd my device will not turn on . ive tried the home and unlock button, my phones on a charger also but the battery wont pop up. just a black screen. What do i do ?

    Leave it alone for an hour and try the reset procedure again. Make sure you're using a genuine Apple charger & cable in a known good wall outlet. You can also try another cable if necessary, and make sure the charging area is clean and free of fluff & debris.

  • Device screen not turning off + Media Player Problems

    My screen does not turn off, I checked the settings in screen/keyboard and they are set but don't seem to work. This is causing my battery to drain.
    Also, I am having intermittent media player problems.
    Suggestions?

    Hi and Welcome to the Community!
    I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • T420 windows 8.1 Manage Bluetooth devices will not turn on

    I have a T40 that I upgraded from windows 7 to windows 8, and recently to windows 8.1, blue tooth device act flaxy and when I go to "Manage Bluetooth devices".  I have a bluetooth logictech v470 mouse which works most of the time and a bluetooth headset Hype (HY-91)
    I have 2 issues:
    1. can not turn on the slider to turn bluetooth on easily. - I finally get it turned on after awhile by double clicking, waiting, or just luck, not sure why it just does not just go on.
    2. I have trouble with my Bluetooth headset device the second time I connect no matter what I do unless I reboot or re-pair the headset it will work.
    I thought it could it be related to two bluetooth devices, but I powered down the mouse. I thought skype was causing an issue, but I quit it and made sure it was not running in the background.
    I did find if I turned off the internal speakers and internal mic only then the headset works properly.
    Any ideas?

    Well my problem is now solved, both devices are bricked, Apple Store replaced both devices today, After talking with my daughter had the iPad mini was charging and it updated iOS8.1.3 and then bricked, tried all the things you suggested with both devices.  Yes, I agree about not letting my devices die, this was the first time my phone had died in 5 months but I firmly believe iOS 8.1.3 was the cause of both devices demise.  Apple checked both devices and promptly replaced both in about 30 minutes.  I hope this is not the way Apple is planning on continuing with software updates.  I have 10 apple devices and have been a strong supporter of their company, but these kind of half done updates are the reason I removed all Microsoft products from our household 7 years ago!

  • When i plug my ipod in the computer it says this ipod cannot connect to itunes because apple moble device is not turned

    When i plug my ipod into the computer itunes says my ipod canot connect to itunes because apple moble service is turned of

    See:
    How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Making mobiledevices not turning off the screen

    Hi, is there anyway to force a mobile device to not turn off its screen when it doesn't recieve user input?
    I've tried to google abit but I really lacked the english words for this I guess ;)
    To make it a bit clearer. I've made a couple of midlets that don't take userinput all the time, and what happens is that after a few secs the device turns off the screen, so I have to sit there and press some random button all the time. A bit useless because this one midlet is just streaming graphics through bluetooth.
    cheers,
    Stian

    i haven't tried it, but if i were to give an idea, I'd say setting a new "display" might be one thing that a phone might use to "wakup" the display. So maybe you can continually set a new display, using the current display.
    so try something like this in your midlet:
    /** partial midlet implementation below **/
    private TimerTask refreshTask;
    public void startApp() {
        // set up display
        // set something as your displayable, etc.
        // create a task that refreshes the display of the midlet
        refreshTask = new TimerTask() {
            public void run() {
                myDisplay.setCurrent(display.getCurrent());
        // set the task to run in 2 seconds, and run again every 2 seconds after that
        new Timer().schedule(refreshTask, 2000, 2000);
    public void destroyApp(boolean b) {
        // cancel the task so it stops refreshing
        refreshTask.cancel();
    /** end pseudo midlet **/so that's just my first idea of something to try, let me know it it works, and of course, tweak the 2000 (2 seconds) to whatever you need on that phone to keep the display awake.

  • New ipod nano 7th generation will not turn on. Any suggestions?

    Just bought a new ipod nano 7th generation & the device will not turn on. Any suggestions?

    Have you charged it?

  • Blackberry will not turn on battery with lightening bolt

    i have a new blackberry curve 8900 i have charged it for 1 hour it still displays the battery and the device will not turn on please help

    Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

    i tried it on my tv sony bravia w700b with my new xperia z1 
    i didnt unlocked my bootloder or i didnt rooted my phone
    dont know whats the problem is
    'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

    Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
    If you have unlocked your bootloader this may also be the cause for this issue.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My iPhone will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings. I have no back up of my phone I've also tried the home/sleep button thing but nothing

    My iPhone 4 will not turn on, when I plug it into my computer and load up iTunes its in recovery mode and the only option is to restore my device to factory settings, I have no back up of my phone I've also tried the home/sleep button thing but nothing, I have literally done every method I was told, I checked for water damage and that's fine. I don't want to restore my phone or buy a new one or pay for repairs because that's wasting money when it could be a simple way to fix it. And yes, I've also tried charging it and turning it in. I really need some help with my phone

    That does happen.  It depends on how hard the server is being hit, as well as the connection speed of your system.  If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

  • My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    Likely this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

    my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

    Has the iPod been wetted?
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer.
    Also see:
    https://discussions.apple.com/message/12690674#12690674
    https://discussions.apple.com/message/13032101#13032101
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I wanted to Sync my Ipod But when i turned on Itunes and connect my ipod it says apple mobile device has not started

    i wanted to Sync my Ipod But when i turned on Itunes and connect my ipod it says apple mobile device has not started

    For Windows:  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • My IPad screen is dark and will not turn on. I have charged the battery and nothing. I have tried to reset the device as well with no luck. Any suggestions?

    My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?

    Please tell me that it has NEVER been jailbroke.  If it has never been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • HT204291 Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.

Maybe you are looking for