My disc drive makes a funny sound and ejects all dvds

i go to put a dvd in the drive and it makes a duhdum duhdum duhdum sound and then ejects the dvd..help!

http://support.apple.com/kb/HT2801
Try Reset SMC as suggested by Apple in the above linked article.
Best.

Similar Messages

What does this mean: The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.??

Is this an iTunes or disc issue? I have burned music to these disc before.
Error message: "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry."
Using........
iTunes 10.7
Memorex Music CD-R 40X 700MB 80min
MacBook Pro
Mac OS X 10.7.5
2.4 GHz Core i5
4 GB 1333 MHz DDR3

Not sure. Try this:
Troubleshooting CD burning errors:
http://support.apple.com/kb/HT2955

ITunes 11.4 The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.

27-inch, Late 2009
Processor 2.66 GHz Core i5
8 GB memory
Software OS X 10.9.5
iTunes 11.4
Can not burn a playlist in iTunes 11.4 to a CD, upon completion of the burn operation get error message, "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry." Receive this message using 2 different external drives that are Apple compatible. 1. is a Pioneer SuperDrive that I had replaced from a previous Mac in a OWC enclosure, 2. the other is a OWC 8X Slim Portable USB 2.0 External. After receiving the error message I can re-insert the disc into the drive and it will mount the disc and it will list all the songs with the correct size, but none of them will play. iTunes then comes up asking me if I want to import the CD, at this time iTunes has a (not responding) status in Finder. Can burn from finder with no problem, only have issue in iTunes.
Background
Last year I took the iMac to the local Apple Store 3 times and they determined the optical drive was defective and replaced it, the last time even replacing the cable to it. When I attempt to burn playlist from internal Superdrive it states it can not burn due to media errors. I have tried Memorex, TDK and PNY media with the same results. I thought purchasing the OWC Slim Portable USB 2.0 External would resolve the issue. If I put a commercial audio CD into the Internal Superdrive it will not mount and will eject it, if I insert the commercial audio CD into the external drive it will mount and play. Now the extended warranty is expired on the iMac and I don't know what next to try.

After multiple attempts to both find an answer to this problem or to fix it myself I've given up and switched to a Windows PC. The same media works just fine at maximum write speed with no special tricks needed. I got my iMac specifically to manage my photographs and burn images for friends and family. It has been nothing but a big disappointment to say the least. To read messages saying I need to lower my write speed or buy more expensive CDs is just laughable. Unless I see something major change I'm sticking with my Windows PC.

How do I make my own sounds and put them on a Midi controller?

I want to be able to make my own sounds and program then into my midi controller.
Is this possible? If so How do I go about doing it?

Hey man, am I right in thinking you want to make your own sounds entirely and then map them so that they can be triggered to play by your midi controller? If so, the method I'm thinking is you're going to have to start coding. The program PureData http://puredata.info/ is a good place to start, it's free and there are a lot of online tutorials if you can be bothered looking, but you'll have to put in the effort of learning how to code it properly. This might be worth it if what you are asking is what I'm thinking you're asking. Otherwise, you'll have to make do with the sounds that Logic Express can create, which isn't exactly a limited set... Hope this helps.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

I have a imac g3 dv se, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes

i have a imac g3 dv se,500mhz, snow and after about 10minutes of it booting it makes a popping sound and the turns off, then it wont turn back on for another 5-10 minutes any suggestions?

Actually sounds like classic symptoms of a failing PAV (power-analog-video) on that model. Historically that's the weak spot in the G3 iMacs.
The lack of active cooling in the G3 iMac puts a lot of heat stress on this board and they eventually fail from overheating. Right now the board is still working as long as it's cool--it only fails when temps inside the computer rise.
About the only way to preserve the computer's life is to mount a 120mm fan directly on the case where the handle is--that's the exhaust port. The fan has to be positioned to PULL air out through that vent. It's an ugly solution to the eye but it has been done around here more than you would think.
Also make certain the bottom of the computer is not blocked. It the computer is sitting on a tablecloth or placemat, or there are loose papers on the desk under the case, it cannot get enough air into the bottom-mounted air intakes. Make/find some blocks to set the iMac a minimum of one inch (2.5CM) from the desk and move anything that can be "inhaled" from under the computer.
Even with such measures, the PAV board will eventually fail and be unrecoverable. It's a good time to start saving for a newer computer.

I updated iPhoto and now can not burn a cd on iPhoto. I am getting error message: The burn to the SuperDrive drive failed. The disc drive didn't respond properly and can't recover or retry.

I updated iphoto 9.4.3 and now it will not allow me to burn pictures on disc. I am recieving the follwing message:
The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry.
I have tried to do a SMC Reset and PRAM reset and it still will not work. Before the update I was burning pics onto the same dics with no problem.
Any suggestions on what to do?
Thanks!

Hey MGRUBE,
Thanks for the question. I understand you are experiencing issues with burning a disc. The following resource may help to resolve your issue:
Disc Burning Quick Assist
http://support.apple.com/kb/ht1152
Thanks,
Matt M.

Dropped my ipod and now it makes a clicking sound and won't turn on at all. is it cheaper to get a new one or fix this one?

i have tile floors and i dropped my ipod classic flat on its back while it was off. i tried turning it on after that and it now it makes a clicking sound and won't even turn on. all it shows is a dead ipod and told me to go to apple.com/support/ipod. i'm not sure how to fix it or if it's even fixable. or is it just cheaper to get a new one?

If the phone will not power on try these three things:
Connect it to your phone charger
Connect it to your computer and open up iTunes
Perform a hard reset (Hold down the sleep/wake (top) button at the same time as the home (circle) button for 45 seconds. When the apple appears on the screen let go of both buttons.

5s phone makes a loud sound and vibration when talking on the phone. Any advice on this?

Need help with this.. iPhone 5s makes a loud sound and vibration while talking. So bad you have to hang up and call back. I have been to Apple and they have replaced the phone 3 times and still having the same problems

My 5s did exactly as you describe only on the left side of the display.
I exchanged mine as this is unacceptable and does not bode well for long term durability (on the creaky units).
You have 30 days I think for defective units. Better make an appointment with support and get it noted for the record or replaced.

HT5622 Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.

Hi, My IP5 when I answer it at home makes this googling sound and the person ringing gets cut off or cant speak.
I have spoken to Virgin and their reply was if it does it again contact Apple.
Wondering if this is a common problen and whether the problem is with the phone or carrier. thx

Hey Bidja,
Thanks for the question. I understand you are having issues with calls on your iPhone 5. The following troubleshooting assistant may help to resolve your issue:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/
If you continue to have issues, see the following article:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
This article speaks of checking the top microphone for debris. On the iPhone 5, this microphone is located on the back of the phone near the camera flash.
Also, you mentioned this happens when you answer a call at home. I interpret that as it does not happen in other locations, is this accurate? If so, then it may be network related, and you'll want to contact your carrier. If not, the steps included above should help to resolve the issue.
Thanks,
Matt M.

What can I do when my laptop makes an alarm sound and is frozen. I cant turn it off.

What can I do when my laptop makes an alarm sound and is frozen? I cannot turn it off.

Thank you It finally turned off. What can I do now to remedy this problem? I was able to turn it on again but it sounded the alarm again.

I make a new id and complete all fields and I but my cricket card information and submit but show me message to return to iTunes support

I make a new id and complete all fields and I but my cricket card information and submit but show me message to return to iTunes support

Then you need to contact iTunes support.
There is probably a problem with your credit card or AppleID. If there is an account security problem, only iTunes support will be able to help you.
Use this form: https://ssl.apple.com/emea/support/itunes/contact.html

Make hey siri customizable and work all the time!!!

Make hey siri customizable and work all the time!!!

My question is how can I use dreamweaver with the advanced recordset with the pageID without dreamweaver crashing 20 times a day
Do you get any errors in Dreamweaver when it crashes?
What version?
What OS?
Have you tried trashing recreating the user config folder ( http://kb2.adobe.com/cps/405/kb405604.html#main_user_config )?
Have you tried trashing the preferences ( http://kb2.adobe.com/cps/839/cpsid_83912.html )?
Has anything changed on the system recently (from program installs, to system / OS updates)?
Have you tried creating a new user account on the system to verify there is no corruption in the current user's system data?

Why does iDVD keep giving me a multiplexing error and ejects my DVD?

I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
dennis

Hi
Multiplex Error - is one of the most complex error to run into - can be so much
see (especially new info at end of list)
MULTIPLEX ERROR !
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

Disc drive makes strange noises

I just got my macbook and from the very start whenever I insert a disc it makes a noise like its popping and breaking internally. the disc will play fine, but the sound is SO wrong that its worrying me. Has anyone else had this problem? Was it just something wrong with the disc drive?

I think what your hearing is the drive sorting itself out, mine makes quite a racket when you first put a disc in but its fine, i think it is standard across the range. To make sure it would be worth comparing to a friends or listen to one in a shop.
Cheers.

My disc drive makes a funny sound and ejects all dvds

Similar Messages

Maybe you are looking for