My Disk Utility doesn't want to open

Is it corrupt and if it is how can I fix it?

First off you'll need to answer elmac's question which iMac do you have, so that we can properly assist you. Then I also see in your profile that your OS X is 10.4.7, is this correct or have you updated to 10.4.10?
Message was edited by: den.thed
Here is the link to OnyX and run disk repairs from there.

Similar Messages

My disk utility doesn't want to show the disk that I need to re install my Mac OS X on!

When I go to recovery mode and go to re install the Mac OS X software again I press next and agree but when it says choose the disk to install on I don't have anything to choose from any suggestions?

In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss.

Lion Disk Utility doesn't finish erase

Since installing Lion (clean install) disk utility doesn’t finish erasing or partitioning external disks. I used the disk utility from the install drive to erase the internal drive before installing Lion, this worked fine, but ever since it failed to erase any of my external drives. It starts of as normal but the progress bar stops half way and just never finish. Disk Utility does respond.
I tried different format options, repair and verify but none of the processes finish.
I went back to the install drive that I used to erase the internal drive before Lion install and it also didn’t want to finish.
I copied the old disk utility from Snow Leopard to my desktop, it opens with a warning, but gives the same outcome.
Any advice?

I'm having the same problem on my late 2010 Air with Lion installed over Snow Leopard.
I've tried several usb memory drives and several external harddrives...all the same problem with the progress bar getting stuck halfway. wether I select 'partition' or 'erase'.
the 'genius' at the mac store told me that he advises a clean install of Lion. I did...or I thought I did but all my files were still in place and the problem was still there. Guess I will have to wipe the drive first.
Also, unable to repair permissions on the MAC drive.
But it is remarkable how few people seem to experience this problem thus far. A google search hardly returns any results.

Disk utility doesn't show external Time Capsule harddisk

Hi.
With an older OS X, it was possible to use disk-utility for making some changes at my TimeCapsule(3rd.Gen.)-harddisk.
Now i tried this with the latest version of Yosemite. I think, at the 1st view to to disk utility window, there was an TC-ikon shown under the SuperDrive-ikon. But some seconds later it was gone! I tried it again after restart my iMac an the TC, but every time finder-window and disk-utility-window looks like this ..
... with added comments in green ("Finder"-window, "disk utility"-window) and red (lost "TC-Harddisk?"-ikon).
I tried this also with a MacBook-air (newest version) - same result
What happened? Is it a Yosemite-Problem?
Can I do something with the terminal-app to get the connection?
<<<---- I posted this Nov.2014 at Mac OS & System Software / OS X Yosemite
Today I connected an USB-Stick with my TimeCapsule. Then I opened Disk Utility and was happy - for some minutes.
At the window of the Disk Utility I saw the TC-Harddisc an the memory-stick too.
But when I tried to add an partition to the TC-Harddisc, it was gone away.
I closed-and-started the disk Utility again - now TC-Harddisc was shown.
I disconnected-and-connected the memory-stick again - now TC-Harddisc was shown at the disc-utility-window.
Thanks for Help!

You cannot partition a TC disk from disk utility in the Mac.. that has always been the case.
What you did last time is partition the sparsebundle.. that is a virtual disk created by the computer.. merely partitioning a virtual disk is pointless.
You simply need to create another sparsebundle or dmg file to use as virtual disk.
But the fact that Yosemite continually loses connection to the TC .. oh yeah that is because Yosemite is buggy.
Reset your TC to factory.
Do this manually..
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Then redo the setup in the airport utility. Use short names with no spaces and pure alphanumeric characters.
Same with passwords only longer.
I recommend you then mount the TC in finder manually by its IP address if at all possible not by name.
The problem here is the IP must be static which it is by default if the TC is the main router but it will have to be specially setup if the TC is bridged.
Use Go, Connect to Server.
SMB://10.0.1.1
When asked for the disk password type that in and do not forget to save it in the keychain.
Then you can mount a TM sparsebundle in disk utility if you want.. although I suggest that is pointless other than to verify your backup.
Do not partition it.. that is not helpful at all.

Disk Utility doesn't recognize HD. Installed new one, same problem.

Hello,
I have a MBP. It suddenly wouldn't boot up, and had the flashing question mark folder upon starting up, so I figured that the HD needed to be replaced. I ordered a brand new drive, and when I try to install Leopard, it doesn't see the new hard drive. I open Disk Utility to partition the drive to GUID, but Disk Utility doesn't even see the new drive. Just my optical drive is listed.
I hooked up the old hard drive externally to another mac, and it appears to be working just fine. So it isn't a bad drive as I had originally thought.
What else could be wrong? The laptop fails to see any internal hard drives. Is there anything else that I can do to fix this problem? Thanks.

Purely conjecture, your serial ATA controller may be bad (or the cable). I assume nothing shows in System Profiler/Hardware/Serial-ATA either. Maybe try the SMC reset?
-If the computer is on, turn it off.
-Disconnect the AC Adapter and remove the computer's battery.
-Press and hold down the power button for 5 seconds and then release the button.
-Reconnect the battery and AC Adapter.
-Press the Power button to restart the computer.

Macbook Pro: Disk Utility doesn't see my HD

Hi guys,
My Macbook Pro has been running slower lately, but I honestly didn't think too much about it...until today. It's just over a year old, running Mac OS X, and I mostly use Safari as my browser, but I have to use Firefox for my online classes. Today, Firefox froze up and quit responding, so I Force Quit it. A few minutes after this, Safari did the same thing, and then it was my entire desktop. Nothing was responding; I had to shut down by pushing the power button.
And then, it wouldn't turn back on. The chime sounded, the apple appeared, and the spinning circle underneath it. And it spun, and spun...until a generic "stop" symbol replaced the apple logo. I immediately shut it back down and did an online search. I followed every fix recommended for this issue. I tried reseting the PRAM, and then the SMC, and still the same thing happened. I tried to boot in Safe Mode, and if seemed to be working...right up until an hour passed and nothing new was happening. I shut it down again, and tried booting from the install disc of Snow Leopard. That worked, and I tried to do Disk Utility with the intention of following the online apple directive of running first aid on my HD. Except Disk Utility doesn't see my HD, only the boot disc and DVD drive. I'm guessing this is a bad sign. I tried calling Apple Care, but they are closed right now. I will call them in the morning, but in the meantime, I thought I'd see if anyone here had any advice I haven't already tried. Sadly, I haven't run Time Machine in...months. I'll end up losing a lot of stuff because I just didn't do that if my HD is toast.
Any suggestions?

Sure seems to be a failed(ing) hard drive. If you happen to get it into safe mode again, the ONLY thing you should immediately do is copy off your Home folder to an external USB disk, SD card, something. Then just get it to an Apple store for check.
Try to copy your files off first and don't try anything else to get at that disk until you copy your home folder. If the disk is failing and you're trying to do things to it you'll loose the chance to get that data.

Disk Utility doesn't refresh when inserting new DVDs

I'm in the process of copying a few DVDs by making an image of them first and then burning the image onto a blank DVD through Disk Utility.
After I'm done with one and insert a new DVD to copy, Disk Utility doesn't refresh to show me the new disk is in the drive. Is it normal?
If it is, is there something I can press so that Disk Utility manually refresh its listing of drives?
I find that quitting and restarting Disk Utility just to make a new image is so inefficient.

I am suddenly having the same problem. When I insert a blank disc either cd or dvd it does not show up in the left column in disc utility. I have tried closing and then relaunching disc utility but nothing. The disc shows up on my desk top but not in disc utility. I fear this is a Snow Leopard problem. Toast has no problem recognizing the disc and burning to it.

My upgrade to Photoshop Elements 12 was deleted by accident. The 2nd download doesn't want to open?

In Aug I upgraded to Photoshop Elements 12. It worked fine but this week someone worked on my PC and deleted it by accident. Now I downloaded it again but it doesn't want to open?

Alan
If your program is Photoshop Elements 12, you have posted in the wrong forum. Somehow you thread got posted in the Adobe Premiere Elements Forum.
Please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you do that something to think about....putting on my Photoshop Elements 12 hat for the moment...
If you have Photoshop Elements 12 and are in its Elements Organizer 12 and you want to edit of of the Elements Organizer 12 photos in the Photoshop Elements 12 Editor, I do not
find any right clicks in that maneuver. Have you tried...
1. Select the Elements Organizer 12 thumbnail for the photo
2. Look to the bottom of the workspace to where it shows an Editor button. Click on the tiny triangle to the right of the work Editor in the button.
You should then get a pop up menu with choices of External Editor, Photoshop, Video Editor. click Photoshop. Does that work to get
you into the Photoshop Elements 12 Editor workspace to edit that photo?
ATR

IPod Shuffle not recognized, device not recognized, disk utility doesn't...

...disk utility doesn't show up.
It's all on my wife's computer as it's her iPod. Up until yesterday - and she didn't change ANYTHING - iTunes 7.01 had no problem wiht the iPod. Today, however, iTunes nor her Mac recognizes the iPod. Can't do a thing with it. It displays a nice green light, but that's it. All connections checked and re-checked. Looked at the disk utility and there's no image for her iPod.
I plugged it into my own Mac and iTunes 7.02 tries to upload/access her library from her iPod and 1) after an interminable wait, say four to five minutes, it recognizes that there's a shared library available, and 2) then it says there's some firewall that won't let iTunes access the liberary.
I don't have an iPod of my own, so my experience is really limited. She uses her iPod all the time and, again, hasn't done anything different than she did last night.
What is to be done? Thanks in advance for GOOD tips.

Turns out she's running iTunes 7.1...
Still nothing.
Anyone out there, please?

Airport Disk Utility Doesn't See External Drive, But Airport Utility Does?

Hey! I am a recent Apple convert and just got a brand new MacBook and Airport Extreme. I am trying to get my Maxtor OneTouch 320GB HDD to work with the Extreme, but to no avail. The Airport Utility sees my HDD, but the Airport Disk Utility doesn't? Any hints/tips on how to fix this problem? Any help is appreciated! Thanks!

All I can think of is that the drive is formatted in NTFS which I have heard cannot be read by the AEBS(Airport Extreme Base Station), but I am confirming this right now in a different message. If you can copy the files, format your drive in HFS+(the Mac's standard file system), then reload the files. See if it works and reply back.

Disk Utility doesn't recognise inserted DVD-R DL

I upgraded to Leopard from Tiger a few week ago and Disk Utility has been working fine for a while. I bought a few blank DVD-R DL disks with 8.5Gig storage capacities, but, when inserted, Disk Utility doesn't show them in the top of the pane on the left side.
It shows the Super Drive, but doesn't show an inserted DVD below it like it usually should.
Any suggestions?
Message was edited by: jemorris55

Alright, so instead of burning to the disk specifically, I burned to the superdrive which automatically burned to the disk. It worked alright and now that the DVD has something on it, its icon pops up in Disk Utility. I don't know why it chenged...

I made a brochure and saved it. But now it doesn't want to open anymore. It says: " Can't open the illustration. The illustration contains an incomplete or garbled description. X +1 / FreeUndo, 0, /frame index, 4, /story index, /art: , x= , x+, I made a b

I made a brochure and saved it. But now it doesn't want to open anymore. It says: Can't open the illustration. The illustration contains an incomplete or garbled description. X +1 / FreeUndo, 0, /frame index, 4, /story index, /art: , x= , x+
Can anyone please help me?
Thanks
- Zabanya

Zabanya,
One thing often tried first is to create a new document and File>Place the (PDF contents, if any, of the) corrupted one to see how much may be rescued that way.
Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
http://www.illustrator.fixtoolbox.com/
As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

My iphoto froze...doesn't want to open. What do i do?

My iphoto froze...doesn't want to open. What can i do?

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Disk utility doesn't open, trash works incorrectly.

After updating to 10.7.3 I have noticed that Disk Utility no longer opens. It pops up into the utility bar for a few seconds, bobs up and down a couple of times, then disappears. The next time I click on Disk Utility I don't even get that much of a response. It just doesn't open. No error report, no pop ups saying that it can't be opened - Nada. I can't use disk utility AT ALL anymore. I've tried Zapping my PRAM, but that's about it.
The other thing I've noticed is that any time I put something into the Trash Bin it automatically tells me that it will delete the item - it doesn't sit in the trash bin like it used to until you manually delete it. The only time I can get it to behave normally is when I am using an external drive and I put something from the external drive into the trash bin.

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

I have an old iBook running 10.3.9 and I want to wipe/erase the disk and get rid of it. Problem is Disk Utility doesn't allow me to erase, it has everything grayed out. And I don't have the original startup CD. Any ideas?

Need to wipe 10.3.9 iBook with no OSX cd and disk utility not allowing me to do it.

You need to use an alternate system; this can be a Mac OS X install disk or a system on an external drive. If needed, buy one from a source such as Amazon or eBay, or phone Apple and ask if they have replacement original disks in stock.
(122593)

My Disk Utility doesn't want to open

Similar Messages

Maybe you are looking for