My display goes off when Battery being charged on Acer E5-511 after upgrading to Windows 10

I upgraded my window 8.1 to Window 10 on Acer E5-511 machine yesterday. I notice that when I switch on power to charge its battery, a beep sounds and display goes off. when power is again switched off the display comes back with a beep again. However, when the machine battery is allowed to charge for some time, either it goes to hibernation mode or stops working since display does not come back even after switching off the power supply. This peculiar problem did not existed when I had used this Notebook with windows 8.1 for past eight months. Can any one help me to solve this problem as i am being forced to charge the battery only when Notebook is not powered on.

A BIOS update fixed Grey Bat's (a.k.a. Myotis grisescens) problem. http://community.acer.com/t5/Windows-10/Restart-problems-with-Acer-E5-511-P8C8-laptop/m-p/370322#M24 http://us.acer.com/ac/en/US/content/drivers Edit: Acer also said that "Your system may require additional software, firmware, and/or a BIOS update to install and run Windows 10." http://us.acer.com/ac/en/US/content/windows10-eligible-models

Similar Messages

IPod Got Washed-Reset-Power Goes Off When Not Plugged/Charging

Hi -
My husband accidentally washed my iPod. He connected to iTunes, downloaded the restore software, and I was able to reset my iPod settings. But now when I disconnect and unplug the iPod, the screen goes dark and won't turn back on. Then after plugging it back in, the Apple logo appears and it syncs normally/charges.
Is there anything I can do to fix this situation?

How many days did he let it dry before he connected it to the computer? Needed to be at least 4 - 5.
If it was immediate it probably killed the battery. You'll need to get it replaced or replace it yourself.
Here is one source, Google for more: http://www.ipodjuice.com

Cinema display goes off when USB cable plugged in

WhenI plug my USB/firewire cable into the computer the screen goes black.
I have used this display for years and never had any problems.
The computer is about a year old but both have worked together since they first met!
Any ideas?
I see similar questions online but no reponse from Apple??!!??

What kind of computer is it connected to? Is there anything else connectted to usb? If so try disconnecting them.
Try smc reset.

Display goes off when close lid and open it again [Lenovo G580]

Hi everybody,
I have a problem due a new update, when I close laptop lid and open it again, there's nothing on screen (like power off laptop) and webcam's light is on! when turning on my laptop it would be on for a second, but it freeze on this state, I think the problem is with kernel but i'm not sure cause i've updated everything.
And this problem occur in both X and other tty.
I'm not sure it should belong here or I should move it Hardware/Kernel section.
Kernel: Linux GNU 3.14.0-4-ARCH
Xorg-server: 1.15.0-5
Nvidia: 334.21-4
everything is updated.

MadTux wrote:Did you notice anything related to the problem in the systemd log or in /var/log/pm-suspend.log?
oh, "pm-suspend" make the log file:
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module uhci_hd...Done.
Unloading kernel module button...modprobe: FATAL: Module i915 is in use.
/usr/lib/pm-utils/functions: line 89: log: command not found
Failed.
Unloading kernel module ehci_hd...Done.
Unloading kernel module wl...Done.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Apr 13 01:00:01 IRDT 2014: performing suspend
that "FATAL: Module i915 is in use." seems suspicious, but i have no idea how to trace it down and solve it.
Last edited by Bersam (2014-04-12 20:38:55)

Backight goes off when unplug charger

Can someone help ?please. A few days ago the backlight of my T61 started to goes off when i unplug the A/C charger. I can still see the computer running fine, it's the screen is very dark. this also happen when i use FN + end key to dim the light but only after the third level. After the screen goes dark i have to shutdown, plug in the charger and turn it back on then the screen is fine.Could this be something is wrong with the THINKVANTAGE PRODUCTIVITY CENTER?? Any help is highly appreciated

SOLVED!
in bios changed in battery section - USER DEFINIED.
in OS chose instead of [Ubuntu 9.04 and Fedora 11 ] the new Ubuntu 9.10.
works like charm!

Display goes off and comes back only when Satellite A210 is restarted

Hi,
Satellite A210 displays goes off now and then and comes back only when the machine is restarted.
Usual runtime runtime 30 or 45 mins
Please advice
# Is this a hardware problem or software?
# Does some one else faced same problem do advice?
Machine is year and a half old runs windows vista basic that comes with it.
I have reinstalled the display adapter drivers also the problem remains same

Hello
Have you tested an external monitor on the notebook?
If the external monitor works fine it seems to be an internal display issue and must be replaced.
Are you running the factory settings on your notebook or have you installed your own Windows version? Before you go to an authorized service provider you should restore the factory settings to determine if its a hardware or software problem. With the factory settings all should work properly and if not in my opinion its a hardware problem.
Check this!!!

Sattelite 1800-752S - the display goes off

Hi everybody.
I have a satellite 1800-752S.
SInce a ew months ithas a wierd problem: the display goes off. If i press and quickly release the lid button it comes back on, but after that goes off again. SOmetimes ot goes off immediately, sometimes after a few minutes, or even hours. SOmetimes it keeps being on when I am running from battery, and annoys me on AC, sometimes the versus. It works quite well, after I turn it to standby or hibernate a few times, and after a restart it annoys me.I have updated its BIOS to the lates from this site, that wouldn't help. I assume it is a hardware problem, because it is the same problem under Linux, and I have tried to install different verisons of drivers and Windows (not only the one from the Recovery CD). Did anyone have the same problem before. Any help will be appreciated.
Thanks a lot
Roman

Hi,
I think you are right, it's a hardware problem. But to be sure, try to connect an external monitor. If it works without problems while the notebooks display goes off, then it must be a hardware fault.
I assume it's a problem with the FL-inverter. You have to give your mashine to a Toshiba service partner for repair.
Bye

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Why does my iMac display go off when I am starting up or waking up my machine from sleep..

Why does my iMac display go off when I am starting up or waking up my machine from sleep..?
When my iMac goes to sleep I then later try to click the magic track pad or keyboard and it will usually then show the initial password entry login screen and then go off. The machine is still on but the display is black and will sometimes flash up the screen again if I press the magic track pad or keyboard but will then black out again..

Well, there are many different reasons why it does this. It might shut off due to power voltage problems, system overheats, or there is a System Problem. The reason it might be hard to boot up is because your power button might not work properly or your system hard drive is damaged.
<Email Edited by Host>

My iphone 3g running ios 4.2.1 goes off when it is idle

i need help,
My iphone 3g running ios 4.2.1 goes off when it is idle and i have to reboot it before it starts work.
it does not go off when it plays music..... or plugged into the PC.

It's likely running slow because of iOS4, not because of apps being open. Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore from your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
You'll most likely need to restore as new to get it running as good as it can. A 3G will never run as good on iOS4 as it did on iOS3.

Iphone 5 switches off when battery still has 15%

After updated to iOS 7, my iphone 5 always switched off when battery still have 15%. Anybody have the same issues?

Sounds as if the battery may need to be recalibrated. Let the battery drain until it turns off. Then connect the phone to the charger and let it charge to 100%. Disconnect and then use it. It should get it back to a better read. The batteries are designed to shut down when the battery has a certain amount of power left. The battery percentage is not always that accurate.
You can take a look at this link from Apple about batteries. http://www.apple.com/batteries/iphone.html

Why does computer turn off when battery 40%?

Why does computer turn off when battery around 40%? I have tried replacing the battery.

Replacing as in "removed, re-installed", or "bought a new one"?
This is my display from "Apple menu > About This Mac > More Info > Power"
"Normal" means no issues.
I will stop now in case you have actually put in a *new* battery ...

Display going off

My display goes off after starting the pc, sometimes after 5 mins and sometimes at the BIOS setup, and even during Windows startup repair. RAM and PSU are fine as I am using them on a different motherboard and they are working fine. Also when the display goes off, sound doesn't go off immediately, I can hear background music and then there is some noise and sound also goes off, HDD led stops blinking afterwards. Sometimes, HDD goes off along with display. So is the culprit graphics card or motherboard or something else( The other motherboard which I tried, (Nvidia 630i) had onboard VGA and it worked fine)
My specifications:
Motherboard: MSI P45 Neo-F (601-7519-010) no OC
RAM: 2X2GB Corsair DDR2
HDD: WD Caviar Green WS6400AACS, 640GB
PSU: Corsair VX450, 450W
GFX Card: ATI Radeon 4850, 512MB DDR3
Operating System: Windows 7
Processor: Intel E6750, 2.66Ghz

It is highly recommended to use identical modules. Using non-identical but similar modules either works properly or it doesn't. The answer depends highly on what specific memory combination is going to be used on what system. So, basically, if you can avoid mixed configurations, avoid them. If you already have the modules there in front of you, go ahead and simply test it. There is no risk of damaging anthing (well, at least not in general).
Quote
but since pc is booting properly, motherboard should be fine right?
Probably --> which means that I personally believe that a problem with the video card is more likely to be the cause. That is why it makes a lot of sense to start testing on that front first. However, the mainboard is not necessarely out of the equation. It is not very likely, but still not totally impossible that the mainboard is the cause for your problem.

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

Why iphone get on and off when battery is good

why iphone get on and off when battery is good

iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

My display goes off when Battery being charged on Acer E5-511 after upgrading to Windows 10

Similar Messages

Maybe you are looking for