MY DISPLAY IS DARKER ON ONE SIDE AND CONTRAST HIGHER

HPG42 NOTEBOOK. WINDOWS 7 HOME PREMIEM 64 BIT. ALL DRIVERS UPDATED. OCCURS IN BIOS  STARTUP TOO.

If it is occuring in BIOS as well then it sounds like an issue with the screen.
Have you contacted HP Support for troublshooting and to setup a service for your notebook?
I am an HP employee.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

Similar Messages

  • Panoramas in CC 2014 are darkened on one side and too light on the opposite side.

    I have both Photoshop CC and Photoshop CC 2014 on my MacBook Pro.
    When sending images from Lightroom for merge ring to panorama and CC 2014 is open, the final product is different from what happens in the CC version.  The final pano is severely darker on one side and somewhat too light on the opposite side of the panorama.
    I should mention that I used Lightroom to color corrected the images used. I used RAW images from my Canon Rebel xTi and all the images are equally lit (or close to it.)
    If Photoshop CC is open, and I send the images to merge to Panorama from Lightroom, the final pano is fine and consistent in lighting across the panorama.
    Anyone else experiencing this issue?
    Here are my specs:
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro11,3
      Processor Name: Intel Core i7
      Processor Speed: 2.3 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 6 MB
      Memory: 16 GB
      Boot ROM Version: MBP112.0138.B02
      SMC Version (system): 2.19f3

    I am having this exact problem and it is driving me crazy. I have to keep switching workspaces to see any, but sometimes they all disappear.
    Restarting AI does not seem to make a difference.
    Any help or tips, other than uninstalling and reinstalling would be appreciated.

  • After resizing a photo and viewing in album picture offsets to one side and crashes ios7

    After resizing a photo using the edit function , viewing the photo in camera roll
    Offsets the picture to one side so its not in the middle , zoom into the pic and zoom back out
    The black borders appear at the top and bottom and all looks in centre
    But when i flick back and forward through my pics and get back to my
    First pic i resized it offsets to one side and the camera roll crashes and freezes

    Since you can't drag a photo when viewing in the large mode you can try the following:
    1 - make sure the Info drawer on the right side is displayed.
    2 - click on a photo and hit the Space bar.
    3 - click on the Full Screen button at the lower left.
    Now you're in full screen mode with the Info drawer at the right.
    4 - either set the rating of the photo to one that you can use to group in a smart album (Command-1 for 1 star, Command-2 for 2 starts, etc.) or add a keyword that can also be used to group the photos in a smart album.
    5 - use the right or left arrow keys on the keyboard to move to the next or previous photos.
    6 - when complete go to the smart album and drag the photos into a regular album.

  • HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

    All is in the title, so I repeat it below with a better identation.
    What are the pros and cons of
    1) choosing to use the SAME
                                                  Apple ID for iCloud services on one side, and
                                                  purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
    2) to have and use two separate Apple Ids for these "two sides"?
    P.S.
    I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
    Also need to mention that I have itunes on a mac, a pc and an iphone.
    Sorry to look so silly with this question, but I don't get the "big picture".

    You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

  • I have an iPod Video. (30GB 5th gen) The headphone jack only works if I push the headphone cable input to one side and hold it t here. If I leave it alone it either doesnt play at all or I hear a crackling sound. Any suggestions? Thanks.

    I have an iPod Video. (30GB 5th gen) The headphone jack only works if I push the headphone cable input to one side and hold it t here. If I leave it alone it either doesnt play at all or I hear a crackling sound. Any suggestions? Thanks.

    There are threads ongoing on similar topics. This is not a suitable topic for this forum.
    I will pass on any comments from the other threads and original post in this one, but I'm closing this topic and any further petitions like this as it will just result in "Creative-bashing" and unproducti've comments.
    Cat

  • Report to display (actuals data from one cube and plan from another)

    Hi Gurus,
             I have a requirement in reporting to display actual data from one cube and plan data from a different one.
            The example below might give a clear picture of the requirement.
    rows has key figures and columns = months
    Jan |  Feb |  Mar |  Apr |  May |  Jun  ...   ....
    GrossSales
    Net Sales   
    Now if I run the report for Current month (Apr), then for the months of (Jan, Feb and Mar) i need to get the data from CUBE1   and for the remaining months (Apr thru Dec) from CUBE2.
    Similarly when i run the report next month(may), 
    then (data for Jan, Feb, Mar, Apr  from CUBE1)
    and ( May thru Dec from CUBE2)
    Any suggestions.
    Thanks in Advance
    Kumar

    Hi Henry,
         We alreadey have a multi provider which includes
    FinDat Cube(CUBE1) for actuals and Comm.Goals cube (CUBE2) for plan.
    So you suggest that we have two versions of key figure for actual and plan.
    ie. each KF will have two versions.
    actuals = (version 10, FiscPer<curr.mnth, key figure, acutals cube)
    Plan = (version 20, FiscPer>=curr.mnth, key figure, comm.goals cube)
    eg:
    Jan | Feb | Mar | Apr | May | Jun ...
    GrossSales(Act)
    GrossSlaes(Plan)
    Net Sales(Acutal)
    Net Sales(Plan)
    Correct me if I am wrong.
    the report has a lot of key figures, having two versions for each kf will be confusing.
    the user would like to see
    Jan.....| ...Feb  |..Mar |..Apr.....|  May  | 
    GrossSales   Act Value|Act.V |Act.V| PlanVal|PlanVal|
    Net Sales
    where Act.Value is from CUBE1
             Plan Value is from CUBE2
    Thanks
    Kumar

  • I keep losing entire events in iPhoto on my iMac.  Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos.

    I keep losing entire events in iPhoto on my iMac.  Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos.  I am operating a 27 inch iMac running OS X 10.9.4.  It has a 2.7 GHz Intel Core i5 processor, and its memory is 4GB 1333 MHz DDR3.  Is there any way to retrieve the lost photos?

    WHat version if iPhoto?  Where is your iPhoto library located?
    TRy
    BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
    LN
    Edit

  • I have a iphone 4s and i can't get the charger to come out of the phone its stuck on one side and will not come out

    I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?

    You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.

  • Count moving object (Inter the ROI from one side and leave ROI from other side)

    Hello All
    I want to design program that can counting moving object that inter ROI from one side and come out from the other side, I want to give each object ID number
    I have design a program that compare between object distances from one frame to the next frame, but the program efficiency is very low
    If any one can give me a sample code that I can use or modify it to suite my application

    Hello,
    you will find the code in the attachment (saved for LV2013). There is a longer delay inside the loop, remove it for efficiency.
    Roughly measuring the time to read an image, the processing takes ~8 ms on my computer (~500x200 image resolution). That is ~125 samples/images per second. Is this not fast enough for you? Considering better image resolution, the time is of course increased.
    My specifications:
    Core i7 3632QM
    6 Gb RAM
    Win 7 x64 (Labview x86 though).
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."
    Attachments:
    IDMovingObjects.zip ‏64 KB

  • Am unable to print cd covers. All I get is the songlist on one side and a black space where the picture should be. Any suggestions?

    I am unable to print cd covers. All I get is the songlist on one side and a black space where the picture should be. Any suggestions?

    Thanks Bob.
    I am thinking along the same line.
    It's interesting that some of the unaffected graphics in the document come up as embedded, but some are just placed there with no link information.
    I guess it's just a matter of how the original graphic was treated or saved.

  • When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

    when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side  and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
    please can anbody help or advise?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • My on screen keyboard has moved to one side and is partially inaccessible. This has only happened on Facebook messenging and is okay with everything else. How do I put it back to normal.

    MMy on screen keyboard has moved to one side and is partially inaccessible. This only happens on Facebook messenging. How do I put it back to normal?

    Hi Susan2014,
    Thank you for using Apple Support Communities.
    Since this issue is only happening in one of your apps, please force quit the app, and reopen it.
    iOS: Force an app to close
    Cheers,
    Alex H.

  • My welcome screen used to have just my name and an icon.  Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

    My welcome screen used to have just my name and an icon.  Now it has my name on one side and guest user on the other. where did it come from and how do I get rid of it?

    Either you enabled the guest user, or you enabled Find My Mac, which requires there to be an active guest account for a thief to log into, so that they'll connect to the internet and allow you to locate it.

  • HT1338 How do I reset the display setting back to default?  My display is zoomed to one corner and the other 2 sides are cut off.  I don't know how to fix it.

    My baby nephew pressed a lot of the buttons on the my mac and has caused the display to zoom into one corner.  It other two corners are cut off which makes it really difficult to use the computer.  I attatched and image so that you can see what I am talking about.  Please help, thanks !  =)

    Hold down the Control key and scroll with the mouse or keyboard.  One direction zooms the other unzooms.

  • Display quite dark after some seconds and stays da...

    The display gets quite dark after some time (10 seconds?),
    eg. during internet surfing or email checking, even if the light sensor is in MAX position. Also removing the hand or the fingers away from the screen (light sensor coverage) the display stays too dark....until I close this app (with the function key), the display gets bright again, unfortunately the app (eg. internet) then is closed :-(

    But there I can't make any changes. If I do so, it changes the profile to "own settings" automatically. But I wannne keep the "normal" and "higher perfomance" settings.
    And by the way; I can't change the time, the display shades. Only if it does or not. "Lower monitor brightness automatically befor go to standby", and if I would disable it, I would change the profile as written above - and that's not what I want.
    MacBook Mac OS X (10.4.8)
    I just want to increase the time the display gets darker.

Maybe you are looking for

  • How can I re-locate an audio track?

    I moved the audio track that I'm using from iTunes so it shows a yellow hazard triangle within my iMovies project. I have moved the audio clip back to where it was in iTunes but iMovie can't find it, and I can't find an option to re-locate the clip.

  • SQL Question - Interesting One

    I need to write a SINGLE SQL statement which has two different queries, if the first query retrieves records then there is no need to execute the second one, if the first query doesn't retrieve the records then I need to make use of second query to r

  • ISE Custom AUP for Guest Wireless

    Hi All, I am trying to setup Guest wireless using Cisco ISE for the first time.  Under Multi-Portal Configurations, i was hoping to be able to edit the DefaultGuestPortal profile so that I could change the wording of the AUP from Cisco's Blurb.  Can

  • OracleException ORA-24817

    Hi Oracle Guru's, One of the user running a report got this error. Oracle. DataAccess. Client. OracleException ORA-24817: Unable to allocate the given chunk for current lob operation. We are running Oracle 10.1.0.3 on windows 2000. Does anyone got an

  • Insert with relationship

    I want to insert (or update) into a table with a relationship to another table. But I do not have the FK value, just another value from the father table. In some SQL databases I have used the following stataments: INSERT INTO emp (empno,ename,deptno)