My display won't go to sleep

I just recently upgraded to the Mountain Lion OS and now my computer won't go into the screen saver (set at 10 minutes) and the display won't go to sleep (after 15 minutes).  It is on all the time.  Any suggestions?

Same issue in ML (sorry for continuing this thread here).
Please let me know if you figure this out. I have tried SMC/PRAM resets, disk permission repairs. Nothing.

Similar Messages

  • Display won't go to sleep (imacg5)

    So the screensaver will kick in when there's no activity for XX minutes, but the screen won't sleep after YY minutes like it's set to in "Energy Saver"
    I wouldn't mind it so much if I could enable an active screen corner to sleep the display, but I don't have that option in my "Dashboard & Expose" system pref.
    One note: there is no mouse/keyboard attached to this iMac, I use "teleport" to share one keyboard/mouse with this iMac G5.

    *A few suggestions:*
    Change the energy saving options, to put the display to sleep and the computer to sleep at the same time.
    Enable (check mark) put the hard disk to sleep when possible.
    Lock the padlock.
    Optional: Repair permissions &/or restart.
    ==========
    See if you can put your computer to sleep w/o shutting down w/your remote.
    ==========
    http://docs.info.apple.com/article.html?artnum=303698 Mac OS X: Why your Mac might not sleep or stay in sleep mode
    http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).

  • Cinema Display won't wake from sleep

    After reading lots in the forums I've concluded lots of people have the same problem that we are mistakenly thinking is specific to a particular monitor or Mac or behaviour.
    Problem: Display suddenly does not wake from sleep - incidentally after an OS update and Cuda update.
    Hypothesis: This definitely seems like a software problem as I've solved it in so many new ways. (Some people are replacing hardware!) Once fixed, the problem recurs the next time the display goes to sleep. However solutions rarely work a second time.
    Solutions:
    1. Zapping PRAM fixes it.
    2. Deleting all displays preferences fixes it.
    3. Safe boot and clear caches may have fixed it.
    4. Pulling the Mini DisplayPort cable and blowing on it has fixed it. (I thought it was dusty since it worked. It may have just been pulling the cable.)
    5. Deleting a power management preference in System/Library/SystemConfiguration/ fixed it.
    6. Moving the power plug from one slot on a power bar to another fixed it. (***!?!)
    7. Creating a new user account fixed it.
    8. Now I'm stuck.
    Please can help me think of a new way to fix it? If I can get it going again, I will simply keep the computer and 2nd display awake forever.

    I have a new fix!
    8. Launch Magic Bullet Looks app and fiddle with the display settings!!! Woohoo! I got it back again.
    As long as the display never goes to sleep and is never unplugged (tried that) I can keep using the monitor. Sadly this means never lettting the new iMac sleep. 

  • Display won't go to sleep

    Hi all,
    I have set the display to sleep after 15 minutes of inactivity in Energy Saver preferences, but I noticed my Mac Pro is on screen saver mode all the time when not in use.
    My screen saver is set to start after 10 minutes of inactivity, and the computer sleep is set to NEVER.
    Is there a setting that I missed or takes precedence over that in Energy Saver for the display?
    TIA

    In system preferences > Desktop&Screen Saver > Screen Saver- there is a start screen saver time/slider. Your setting here may be affecting the Energy Saver Prefs.

  • Display won't go to sleep and freezes

    hey guys, my macbook retina wont go to sleep when I leave it idle, I set it to go to sleep after 1 minute in energy saver preferences but nothing happens..the screen stays on , if I try to manually make it sleep, than the computer screen turns black and freezes.. I have to manually restart after that, I'm on mountain lion 10.8.1

    I have a few questions if you have a few minutes to answer. Here they are.
    1. Exactly what is sleeping if in energy saver you have these settings:
    display not sleeping: hard disk unchecked-not sleeping: and computer sleeping?
    2. Why do you leave the hard disk unchecked-not sleeping. If it is spinning, isn't it better to have it stop spinning when not in use?
    3. Sort of related to question number 2, why do you use the settings that you mentioned: display-sleeping: computer not sleeping; hard disk-not sleeping. In other words why do you only put the display to sleep.
    Thanks, Lorin (dont know much about sleep)

  • Display won't go to sleep / screen saver won't turn on

    Since upgrading to Snow Leopard instead of the screen saver activating or the screen going to sleep when inactive, the screen goes dark for about a second and then flashes back on. It's resulted in images being burned into my screen a couple of times now.
    If I manually activate the screen saver then the screen saver stays active and after a minute the display goes to sleep. Also, if I'm using Front Row the screen will go to sleep without a problem. I've tried turning off all apps to test it if one of them is preventing it, and and it still happens.
    Anyone else have this happening?

    The screensaver preference file is stored in ~/Library/Preferences/ByHost/com.apple.screensaver.xxxxxxx.plist, where xxxxxxx is a UID for your machine. By moving this file out of the folder, your screensaver settings will be reset to the defaults.
    The power settings are stored in /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist.
    If your new user does not have the problem, then the preference problem may be in your ~/Library/Preferences folder.

  • MBP display won't stay off, wakes from sleep

    I have a newish 15" MBP, 1680 display, hooked up to a Dell external monitor when it's at home. When I go to bed I cut power to the display via control-shift-eject, but generally don't put the computer to sleep overnight.
    With this new machine, after it's been running for a while (as little as a day, or as long as a couple weeks), the displays will come on again in the night. Once this happens, the displays won't stay off for longer than about five seconds. If I then put the machine to sleep, it'll wake itself up minutes or hours later (generally not long enough to miss a Time Machine interval). The only cure is rebooting.
    I tried an SMC reset, but that fix only lasted about as long as any other reboot.
    I've since tried systematically removing every peripheral (a USB hub, the external display, any directly-connected iOS devices) and testing display-off after each; no change. I've turned off my Bluetooth keyboard and mouse, then disabled Bluetooth on the computer, turned off wifi, quit every menu extra (jitouch, Viscosity, Dropbox, Pastebot, Fastscripts, Transmit, Teleport), and quit every running application. The problem remains repeatable after every step.
    It's repeatable at the moment — any suggestions for other things to try, preferably short of the reboot which temporarily masks the problem? I'm a little concerned that it's going to manifest at some point while I have the laptop sitting in a bag, which will then cook itself.
    I'm on 10.6.4 now, the problem started on 10.6.3.
    Thanks.

    Try checking the system logs in Applications/Utilities/Console.app for clues. The entries carry time stamps. Usually a wake event will leave some trace. By matching time stamps to the time of occurrence you may find the culprit.

  • Display won't sleep after being in suspend once.

    When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
    However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
    The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
    The only way to make it sleep is to close the lid.
    I have tried resetting SMC and NVRAM but to no avail.
    I have the first generation aluminium macbook.
    Does anyone else have this problem?
    I have had this problem both in 10.6 and 10.8
    Regards Robin Hansson

    When rebooting the computer, the display sleeps after set interval and can manually be put to sleep using shift+ctrl+eject.
    However if the computer goes to sleep or I myself close the lid to make it sleep, the display won't sleep again.
    The display won't sleep after set interval in power settings and when I press shift+ctrl+eject the keyboard backlit turns off but the screen stays on.
    The only way to make it sleep is to close the lid.
    I have tried resetting SMC and NVRAM but to no avail.
    I have the first generation aluminium macbook.
    Does anyone else have this problem?
    I have had this problem both in 10.6 and 10.8
    Regards Robin Hansson

  • Display won't sleep and screen saver won't sart

    I upgraded to the new OS and the display won't sleep and screen saver won't come on. Help please.

    Long shot.
    Do a backup.
    Quit the application.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
    Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Utilities/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • MBA won't wake from sleep while connected to VGA Display

    Since a few days I'm using a VGA Display connected through the official Apple Mini Displayport - VGA Adapter. However, when I put my MacBook Air to sleep and then close the lid (otherwise closing the lid will just continue on the display). Keeping the monitor attached, it won't wake from sleep anymore. Disconnecting the adapter at that moment won't make any difference. What troubleshooting steps can I make?

    I usually...
    Take out the charger
    take out the battery pack
    reinsert the battery pack
    Then click the power switch
    (if you have low battery I'm sure it would be a good idea to plug in the adapter again

  • HP w2408 Display won't sleep!

    Hi There,
    I have just purchased a new HP w2408 24" display and it works perfectly with the G5 until the monitor goes to sleep. Instead of sleeping, the display says "Screen Going To Sleep" for 2 secs and the screen goes black. Then in 2 more secs the screen says the same message again and cycles this over and over. This only happens with DVI - If I use VGA the problem disappears, but then I lose the clarity of the DVI input!
    In a nutshell, it spends all its time telling me it is going to sleep, but never actually does!
    I have used the G5 with an Apple 23" cinema display with no problems and I have tested the HP display on my Mac Mini with no problems either!
    Can anyone help?

    Mine does the same. Did you find any solutions?

  • Display won't sleep -- PreventUserIdleDisplaySleep bit set

    Hi, my Mac had a problem such that the display, which is set to sleep after 3 minutes, would not go to sleep, wasting power and lighting up my office undesirably.  I just wanted to post it as a possible helpe to others. 
    Last night, the PreventUserIdleDisplaySleep bit got set by something called "powerd" and something I hadn't seen, NoDisplaySleepAssertion, got set by "screensharingd". 
    rcook@rhomemac (~): pmset -g assertions
    9/26/12 11:34:08 PM PDT 
    Assertion status system-wide:
       PreventUserIdleDisplaySleep    1
       CPUBoundAssertion              0
       PreventSystemSleep             0
       PreventUserIdleSystemSleep     0
       ExternalMedia                  0
       UserIsActive                   0
       ApplePushServiceTask           0
       BackgroundTask                 0
    Listed by owning process:
      pid 59830(screensharingd): [0x0000000500000172] 00:00:00 NoDisplaySleepAssertion named: "Nameless (via IOPMAssertionCreate)"
      pid 59809(powerd): [0x000000050000012d] 00:01:46 PreventUserIdleDisplaySleep named: "com.apple.powermanagement.delayDisplayOff"
            Timeout will fire in: -46.2 Action=TimeoutActionTurnOff
    Something I don't understand was the negative value for  "Timeout will fire in: -46.2 "  What's up with that? 
    My solution was to turn off ScreenSharing, then go to the Terminal and do this:
    sudo kill -9 59809 59830
    Simply killing the offending processes didn't work, I had to explicitly turn off Screensharing first. 
    I then checked and PreventUserIdleDisplaySleep was 0:
    rcook@rhomemac (~): pmset -g assertions
    9/26/12 11:34:54 PM PDT 
    Assertion status system-wide:
       PreventUserIdleDisplaySleep    0
       PreventSystemSleep             0
       PreventUserIdleSystemSleep     0
       ExternalMedia                  0
       UserIsActive                   0
       ApplePushServiceTask           0
       BackgroundTask                 0
    So I turned Screen Sharing back on and it remained set to 0. 
    Problem solved. 

    Hi, my Mac had a problem such that the display, which is set to sleep after 3 minutes, would not go to sleep, wasting power and lighting up my office undesirably.  I just wanted to post it as a possible helpe to others. 
    Last night, the PreventUserIdleDisplaySleep bit got set by something called "powerd" and something I hadn't seen, NoDisplaySleepAssertion, got set by "screensharingd". 
    rcook@rhomemac (~): pmset -g assertions
    9/26/12 11:34:08 PM PDT 
    Assertion status system-wide:
       PreventUserIdleDisplaySleep    1
       CPUBoundAssertion              0
       PreventSystemSleep             0
       PreventUserIdleSystemSleep     0
       ExternalMedia                  0
       UserIsActive                   0
       ApplePushServiceTask           0
       BackgroundTask                 0
    Listed by owning process:
      pid 59830(screensharingd): [0x0000000500000172] 00:00:00 NoDisplaySleepAssertion named: "Nameless (via IOPMAssertionCreate)"
      pid 59809(powerd): [0x000000050000012d] 00:01:46 PreventUserIdleDisplaySleep named: "com.apple.powermanagement.delayDisplayOff"
            Timeout will fire in: -46.2 Action=TimeoutActionTurnOff
    Something I don't understand was the negative value for  "Timeout will fire in: -46.2 "  What's up with that? 
    My solution was to turn off ScreenSharing, then go to the Terminal and do this:
    sudo kill -9 59809 59830
    Simply killing the offending processes didn't work, I had to explicitly turn off Screensharing first. 
    I then checked and PreventUserIdleDisplaySleep was 0:
    rcook@rhomemac (~): pmset -g assertions
    9/26/12 11:34:54 PM PDT 
    Assertion status system-wide:
       PreventUserIdleDisplaySleep    0
       PreventSystemSleep             0
       PreventUserIdleSystemSleep     0
       ExternalMedia                  0
       UserIsActive                   0
       ApplePushServiceTask           0
       BackgroundTask                 0
    So I turned Screen Sharing back on and it remained set to 0. 
    Problem solved. 

  • Macbook pro display won't go to screensaver or sleep

    I am running OS X Lion 10.7.1 and I have my display set to go to sleep after 1 minute and my screen saver set to 3 minutes.  While streaming to Apple TV, the display would just go to screen saver and when I wasn't using it, it would just go to sleep.  Now, nothing.  The screen just stays on and I

    I've had the same problem after a software update since early March this year. Wondered it might be the update of Safari 4.0.5 or ProKit 5.1. Although I took them to the apple store in london last week, they deleted sleepimage in Terminal and then it turned out nothing changed. However, they just haven't got any clue at all. Then, the other day I tried adding a new user account and removing battery then pressed power button for 5 secs, either way did not work. Indeed we should get their attention. btw, i'm using a mid2008 15" macbook pro on 10.5.8.

  • My macbook pro won't go to sleep when I close the lid

    I've been having this problem for a couple of years now, and it's getting pretty annoying.
    I got this MacBook Pro in April of 2011. Otherwise, it works great. It goes to sleep when I go up to the apple menu and select "sleep." BUT, when I close the lid, it stays on. Heaven forbid I don't have it plugged in, because then the battery will be shot! It also won't go to sleep automatically when I leave it for a long time. Yet another potential battery drain.
    How do I fix it so that it goes to sleep automatically when I close the lid and when I leave it alone for a while?
    In Energy Saver, I have checked all the boxes necessary: "Put the hard disk(s) to sleep when possible" "Wake for network access" and "Automatically reduce brightness before display goes to sleep."  
    Am I missing something here, or does my computer just have a defect?

    I had the same issue.
    I used an external monitor but all of a sudden when I closed the lid my Macbook Pro did not go to sleep!
    I solved the problem with a SMC reset.
    Try to do it...

  • Display issue coming out of sleep (w/ external display)

    Hey everyone,
    I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp).
    I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent it to sleep and the integrated display's brightness was turned all the way down. Basically, the MacBook's integrated display won't light up. I then need to hold down the power button until the machine powers off, and start it up again. Only then will the display come on, and the machine start normally.
    I've been observing this with both an external Thunderbolt Display, and a TV connected through the HDMI port. I don't think this is a Mac OS issue, as I've seen similar behavior on this same machine, running Windows, under Bootcamp.
    An example scenario: I'll be using the Thunderbolt Display, or watching a movie on my TV, with the integrated display's brightness turned all the way down, and then, while the display is still connected, I will close the lid - The machine will go to sleep. I will then come the next day, and while the computer is asleep, disconnect the external display, and open the lid. The MacBook's integrated display will not light up, the brightness keys will not respond, and I will need to force-shutdown the machine, and start it again - it will then start up, and usually fall back to the lowest display resolution setting (even though I always use much higher resolutions on both the integrated and external displays).
    I'm guessing this is happening because the computer is expecting the external display that was connected to it, during its last operation, to still be available, and when it's not - it panics!
    Also, I had times where this happened, and a force-shutdown would not do the trick. I had to actually connect back to the external display, wait for the machine to start normally, take the integrated display's brightness back up, and disconnect the external display. The machine would then resume normal operation, and I would be able to disconnect the external display and work on the integrated display.
    Has anyone else experienced this, or anything similar?

    There we go. Here's the complete Console report, up until the reboot, which fixed things. I can't make anything out of this, but perhaps someone else can.
    13/10/12 8:37:29.010 AM loginwindow[535]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    13/10/12 8:37:29.041 AM com.apple.launchd[1]: (com.apple.emond.aslmanager[2845]) Exited with code: 255
    13/10/12 8:37:29.468 AM hidd[540]: MultitouchHID: device bootloaded
    13/10/12 8:37:29.000 AM kernel[0]: Wake reason: EC.LidOpen EHC1 (User)
    13/10/12 8:37:29.000 AM kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
    13/10/12 8:37:29.000 AM kernel[0]: RTC: PowerByCalendarDate setting ignored
    13/10/12 8:37:29.000 AM kernel[0]: Previous Sleep Cause: 5
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 1 of Hub at 0x1d000000) may have caused a wake by issuing a remote wakeup (2)
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:37:29.000 AM kernel[0]: The USB device HubDevice (Port 8 of Hub at 0x1d100000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: TBT W (2): 0x0100 [x]
    13/10/12 8:37:29.000 AM kernel[0]: The USB device BRCM20702 Hub (Port 1 of Hub at 0x1d180000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0x1d181000) may have caused a wake by issuing a remote wakeup (3)
    13/10/12 8:37:29.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:37:30.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:37:30.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:37:30.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:37:30.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:37:30.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:37:31.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:37:31.982 AM airportd[2838]: _doAutoJoin: Already associated to “w00***”. Bailing on auto-join.
    13/10/12 8:37:32.459 AM configd[17]: network changed: v4(en0+:192.168.1.104) DNS+ Proxy+ SMB
    13/10/12 8:37:32.498 AM UserEventAgent[11]: Captive: en0: Not probing 'w00***' (protected network)
    13/10/12 8:37:32.514 AM configd[17]: network changed: v4(en0!:192.168.1.104) DNS Proxy SMB
    13/10/12 8:37:35.780 AM com.apple.usbmuxd[518]: SCEDeviceSocketCallback USBMuxRecvWithTimeout failed for 0x10020cb90-iTunes/com.apple.iTunes:0->0x3d-192.168.1.101:0:0: 54 - Connection reset by peer
    13/10/12 8:37:35.781 AM iTunes[2272]: _receive_message (thread 0x117992000): Could not securely receive message size: SSL_ERROR_SYSCALL (Early EOF reached)
    13/10/12 8:37:36.284 AM iTunes[2272]: _send_message (thread 0x117992000): Could not securely send message size 406: SSL_ERROR_SYSCALL errno (Broken pipe).
    13/10/12 8:37:36.286 AM iTunes[2272]: AMDeviceStopSession (thread 0x117992000): Could not stop session with device 61: kAMDSendMessageError
    13/10/12 8:37:57.165 AM com.apple.usbmuxd[518]: _handle_timer heartbeat detected detach for device 0x3d-192.168.1.101:0!
    13/10/12 8:38:14.000 AM kernel[0]: NVDA::setPowerState(0xffffff8026183800, 0 -> 2) timed out after 45406 ms
    13/10/12 8:39:25.000 AM bootlog[0]: BOOT_TIME 1350110365 0
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: PCID enabled
    13/10/12 8:39:30.000 AM kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
    13/10/12 8:39:30.000 AM kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    13/10/12 8:39:30.000 AM kernel[0]: vm_page_bootstrap: 4043614 free pages and 117922 wired pages
    13/10/12 8:39:30.000 AM kernel[0]: kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
    13/10/12 8:39:30.000 AM kernel[0]: zone leak detection enabled
    13/10/12 8:39:30.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    13/10/12 8:39:30.000 AM kernel[0]: standard background quantum is 2500 us
    13/10/12 8:39:30.000 AM kernel[0]: mig_table_max_displ = 74
    13/10/12 8:39:30.000 AM kernel[0]: TSC Deadline Timer supported and enabled
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto kext started!
    13/10/12 8:39:30.000 AM kernel[0]: Running kernel space in FIPS MODE
    13/10/12 8:39:30.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    13/10/12 8:39:30.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    13/10/12 8:39:30.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    13/10/12 8:39:30.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    13/10/12 8:39:30.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    13/10/12 8:39:30.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    13/10/12 8:39:30.000 AM kernel[0]: MAC Framework successfully initialized
    13/10/12 8:39:30.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    13/10/12 8:39:30.000 AM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    13/10/12 8:39:30.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 889A
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    13/10/12 8:39:30.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration begin ]
    13/10/12 8:39:30.000 AM kernel[0]: Sleep failure code 0x00000002 0x27006c00
    13/10/12 8:39:30.000 AM kernel[0]: console relocated to 0xfd0020000
    13/10/12 8:39:30.000 AM kernel[0]: PCI configuration changed (bridge=17 device=5 cardbus=0)
    13/10/12 8:39:30.000 AM kernel[0]: [ PCI configuration end, bridges 12 devices 16 ]
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - type 2 sleep enabled
    13/10/12 8:39:30.000 AM kernel[0]: AppleThunderboltNHIType2::start - SXFP method found
    13/10/12 8:39:30.000 AM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
    13/10/12 8:39:30.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    13/10/12 8:39:30.000 AM kernel[0]: rooting via boot-uuid from /chosen: D6807041-7128-30C2-9A2D-BFEEC3331CEE
    13/10/12 8:39:30.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    13/10/12 8:39:30.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    13/10/12 8:39:30.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE SSD SM768E Media/IOGUIDPartitionScheme/Customer@2
    13/10/12 8:39:30.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 3
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 4020736 to: 10443264 (joffset 0x12ada000)
    13/10/12 8:39:30.000 AM kernel[0]: BTCOEXIST off
    13/10/12 8:39:30.000 AM kernel[0]: BRCM tunables:
    13/10/12 8:39:30.000 AM kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    13/10/12 8:39:30.000 AM kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: examining extra transactions starting @ 10443264 / 0x9f5a00
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: Extra txn replay stopped @ 11364864 / 0xad6a00
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: IOThunderboltSwitch(0x0)::listenerCallbackStatic - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    13/10/12 8:39:30.000 AM kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
    13/10/12 8:39:30.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
    13/10/12 8:39:30.000 AM kernel[0]: Kernel is LP64
    13/10/12 8:39:30.000 AM kernel[0]: hfs: Removed 27 orphaned / unlinked files and 2233 directories
    13/10/12 8:39:28.977 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    13/10/12 8:39:30.783 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    13/10/12 8:39:31.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:48:ea:41
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    13/10/12 8:39:31.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    13/10/12 8:39:32.037 AM airportd[25]: _processDLILEvent: en0 attached (down)
    13/10/12 8:39:32.000 AM kernel[0]: createVirtIf(): ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802247e400
    13/10/12 8:39:32.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    13/10/12 8:39:32.000 AM kernel[0]: Created virtif 0xffffff802247e400 p2p0
    13/10/12 8:39:32.080 AM com.apple.SecurityServer[15]: Session 100000 created
    13/10/12 8:39:32.000 AM kernel[0]: AirPort: Link Down on en0. Reason 1 (Unspecified).
    13/10/12 8:39:32.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:32.101 AM configd[17]: network changed.
    13/10/12 8:39:32.103 AM configd[17]: setting hostname to "w00fa.local"
    13/10/12 8:39:32.112 AM com.apple.SecurityServer[15]: Entering service
    13/10/12 8:39:32.193 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    13/10/12 8:39:32.000 AM kernel[0]: Previous Shutdown Cause: 3
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    13/10/12 8:39:32.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8286 FirmwareVersion - 0x0097
    13/10/12 8:39:32.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    13/10/12 8:39:32.000 AM kernel[0]: AGC: 3.2.11, HW version=3.2.19 [3.2.8], flags:0, features:20600
    13/10/12 8:39:32.000 AM kernel[0]: NVDAGK100HAL loaded and registered.
    13/10/12 8:39:32.586 AM fseventsd[144]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (87566 7 87588)
    13/10/12 8:39:32.586 AM fseventsd[144]: log dir: /.fseventsd getting new uuid: A93F6A97-D1D4-4728-9B86-3AB73E58340C
    13/10/12 8:39:32.599 AM mDNSResponder[146]: mDNSResponder mDNSResponder-379.32.1 (Aug 31 2012 19:05:06) starting OSXVers 12
    13/10/12 8:39:32.645 AM systemkeychain[148]: done file: /var/run/systemkeychaincheck.done
    13/10/12 8:39:32.652 AM configd[17]: network changed: DNS*
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2D_IPC: Loaded
    13/10/12 8:39:32.654 AM mDNSResponder[146]: D2DInitialize succeeded
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Mounted /dev/rdisk0s4 (Read-Write, label "BOOTCAMP", NTFS 3.1)
    13/10/12 8:39:33.245 AM tuxera_ntfs[509]: Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,adaptiveuid,adaptivegid
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,allow_other,no nempty,relatime,fsname=/dev/disk0s4,volname=BOOTCAMP
    13/10/12 8:39:33.000 AM kernel[0]: DSMOS has arrived
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    13/10/12 8:39:33.000 AM kernel[0]: Universal Audio Apollo - 4.0.0.13440 (x86_64) Mar 12 2012 20:19:07
    13/10/12 8:39:33.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    13/10/12 8:39:33.000 AM kernel[0]: TUFS: starting (version 2012.4.17, x86_64 (10.6+), built Apr 17 2012, 11:40:41)
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: License: Valid.
    13/10/12 8:39:33.246 AM tuxera_ntfs[509]: Ownership and permissions disabled, configuration type 1
    13/10/12 8:39:33.301 AM fseventsd[144]: check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x10ee45528)
    13/10/12 8:39:33.301 AM fseventsd[144]: log dir: /Volumes/BOOTCAMP/.fseventsd getting new uuid: C0009105-8F61-43E9-8563-1BB388632E71
    13/10/12 8:39:33.393 AM hidd[540]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    13/10/12 8:39:33.409 AM kdc[538]: label: default
    13/10/12 8:39:33.409 AM kdc[538]:           dbname: od:/Local/Default
    13/10/12 8:39:33.409 AM kdc[538]:           mkey_file: /var/db/krb5kdc/m-key
    13/10/12 8:39:33.409 AM kdc[538]:           acl_file: /var/db/krb5kdc/kadmind.acl
    13/10/12 8:39:33.432 AM appleeventsd[545]: main: Starting up
    13/10/12 8:39:33.435 AM kdc[538]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    13/10/12 8:39:33.451 AM com.apple.usbmuxd[518]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
    13/10/12 8:39:33.507 AM loginwindow[535]: Login Window Application Started
    13/10/12 8:39:33.508 AM kdc[538]: KDC started
    13/10/12 8:39:33.510 AM awacsd[549]: Starting awacsd connectivity-78 (Jul 26 2012 14:37:46)
    13/10/12 8:39:33.512 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.513 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.000 AM kernel[0]: macx_swapon SUCCESS
    13/10/12 8:39:33.513 AM awacsd[549]: InnerStore CopyAllZones: no info in Dynamic Store
    13/10/12 8:39:33.520 AM aosnotifyd[552]: bootstrap_look_up failed (44e)
    13/10/12 8:39:33.539 AM locationd[536]: NOTICE,Location icon should now be in state 0
    13/10/12 8:39:33.539 AM locationd[536]: locationd was started after an unclean shutdown
    13/10/12 8:39:33.611 AM apsd[551]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    13/10/12 8:39:33.613 AM coreservicesd[27]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    13/10/12 8:39:33.615 AM mds[532]: (Normal) FMW: FMW 0 0
    13/10/12 8:39:33.619 AM WindowServer[567]: Server is starting up
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.624 AM WindowServer[567]: Session 256 released (1 references)
    13/10/12 8:39:33.635 AM WindowServer[567]: Session 256 retained (2 references)
    13/10/12 8:39:33.636 AM WindowServer[567]: init_page_flip: page flip mode is on
    13/10/12 8:39:33.000 AM kernel[0]: en0: 802.11d country code set to 'US'.
    13/10/12 8:39:33.000 AM kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    13/10/12 8:39:33.898 AM fseventsd[144]: Logging disabled completely for device:1: /Volumes/Recovery HD
    13/10/12 8:39:34.000 AM kernel[0]: nspace-handler-set-snapshot-time: 1350110375
    13/10/12 8:39:34.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:34.831 AM WindowServer[567]: mux_initialize: Mode is dynamic
    13/10/12 8:39:34.847 AM WindowServer[567]: GLCompositor enabled for tile size [256 x 256]
    13/10/12 8:39:34.847 AM WindowServer[567]: CGXGLInitMipMap: mip map mode is on
    13/10/12 8:39:34.933 AM WindowServer[567]: WSMachineUsesNewStyleMirroring: true
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.933 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x5 for display 0x042803c0
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x6 for display 0x003f003f
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x7 for display 0x003f003e
    13/10/12 8:39:34.934 AM WindowServer[567]: Created shield window 0x8 for display 0x003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[840 x 525], 54 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
    UUID 0x000006100000a00f00000000042803c0
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003f: GL mask 0x8; bounds (1864, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003e: GL mask 0x4; bounds (1865, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    13/10/12 8:39:34.936 AM WindowServer[567]: Display 0x003f003d: GL mask 0x2; bounds (1866, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXPerformInitialDisplayConfiguration
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x042803c0: MappedDisplay Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[840 x 525], Rotation 0, Resolution 2
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1864,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1865,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (1866,0)[1 x 1], Rotation 0, Resolution 1
    13/10/12 8:39:34.936 AM WindowServer[567]: CGXMuxBoot: Boot normal
    13/10/12 8:39:34.998 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x00004733, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.001 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004d23, unit 4, caps QEX|QGL|MIPMAP, vram 580 MB
    13/10/12 8:39:35.003 AM WindowServer[567]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    13/10/12 8:39:35.006 AM loginwindow[535]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:35.014 AM hidd[540]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    13/10/12 8:39:35.050 AM WindowServer[567]: Unable to open IOHIDSystem (e00002bd)
    13/10/12 8:39:35.092 AM WindowServer[567]: Created shield window 0x9 for display 0x042803c0
    13/10/12 8:39:35.092 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:35.108 AM launchctl[585]: com.apple.findmymacmessenger: Already loaded
    13/10/12 8:39:35.124 AM com.apple.SecurityServer[15]: Session 100005 created
    13/10/12 8:39:35.146 AM hidd[540]: CGSShutdownServerConnections: Detaching application from window server
    13/10/12 8:39:35.146 AM hidd[540]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    13/10/12 8:39:35.163 AM loginwindow[535]: Login Window Started Security Agent
    13/10/12 8:39:35.223 AM SecurityAgent[594]: This is the first run
    13/10/12 8:39:35.223 AM SecurityAgent[594]: MacBuddy was run = 0
    13/10/12 8:39:35.249 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.280987 AM [AirPlay] Started browsing for _airplay._tcp.
    13/10/12 8:39:35.281 AM coreaudiod[592]: 2012-10-13 08:39:35.281405 AM [AirPlay] Started browsing for _raop._tcp.
    13/10/12 8:39:35.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    13/10/12 8:39:35.965 AM UserEventAgent[587]: cannot find useragent 1102
    13/10/12 8:39:36.935 AM WindowServer[567]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    13/10/12 8:39:36.955 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:36.965 AM WindowServer[567]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000, 1.000000, 1.000000)
    13/10/12 8:39:37.000 AM kernel[0]: directed SSID scan fail
    13/10/12 8:39:39.274 AM SecurityAgent[594]: User info context values set for w00fa
    13/10/12 8:39:39.000 AM kernel[0]: MacAuthEvent en0   Auth result for: 68:7f:74:a1:24:96  MAC AUTH succeeded
    13/10/12 8:39:39.432 AM SecurityAgent[594]: Login Window login proceeding
    13/10/12 8:39:39.618 AM loginwindow[535]: Login Window - Returned from Security Agent
    13/10/12 8:39:39.631 AM loginwindow[535]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    13/10/12 8:39:39.657 AM loginwindow[535]: USER_PROCESS: 535 console
    13/10/12 8:39:39.000 AM kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: Link Up on en0
    13/10/12 8:39:39.000 AM kernel[0]: en0: BSSID changed to 68:7f:74:a1:24:96
    13/10/12 8:39:39.000 AM kernel[0]: en0::IO80211Interface::postMessage bssid changed
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: UserName
    13/10/12 8:39:39.706 AM com.apple.launchd.peruser.501[610]: (com.apple.gamed) Ignored this key: GroupName
    13/10/12 8:39:39.708 AM com.apple.launchd.peruser.501[610]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    13/10/12 8:39:39.712 AM loginwindow[535]: Connection with distnoted server was invalidated
    13/10/12 8:39:39.717 AM distnoted[615]: # distnote server agent  absolute time: 15.385943220   civil time: Sat Oct 13 08:39:39 2012   pid: 615 uid: 501  root: no
    13/10/12 8:39:39.000 AM kernel[0]: AirPort: RSN handshake complete on en0
    13/10/12 8:39:39.967 AM WindowServer[567]: Received display connect changed for display 0x42803c0
    13/10/12 8:39:39.998 AM WindowServer[567]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x10158a320  isBackBuffered: 1 numComp: 3 numDisp: 3
    Thanks!
    -w00f

Maybe you are looking for

  • Certain songs will no longer open in iTunes

    Two night ago I tried playing some songs that have been in iTunes, working fine, for over 2 years, and they simply refused to play. No progress bar of any kind would pop up, iTunes essentially ignored my clicks to play the songs. I tried deleting the

  • Can't Sync iTunes to iPhone - iPad & iPod work fine - please help

    I have a new iPad which syncs everything just fine.  I have been using an iPod for years with no issues.  I have had my iPhone for over a year and for the first time I decided that I want to put music on it.  I have connected my iPhone to iTunes many

  • Dell Laptop freezes Itunes  when I load any CD

    Hi I just uninstalled apple update for itunes, disabled Bonjour. I'm still having an issue when I load any blank, or manufactured CD into CD/DVD drive, while Itunes is opened. Itunes stops dead and lags up my laptop. Even the podcast that Itunes is d

  • Can I force sync the apps on my phone to override the settings on itunes?

    I have several ipod iphone things that I sync to one computer. yesterday I restored an ipod touch that I have to replace. I right clicked once it was attached to sync if from an older restore. Once I did that I realized i had my iphone attached and n

  • Data log rate of Counter Period acquisition

    I'm measuring and recording the period of a digital input pulse train (input to NI9421 card on a 'C' series DAQ chassis and recorded via LabVIEW SignalExpress 2009).  The 'Counter Period' acquisition step is configured to use '1 Counter' measurement