My Distort is Not Selectable. Why?

I am Using Adobe PhotoShop CS6, Trying to Make what's on THIS Tutorial & Following Instructions from Steps 1-3.
http://designreviver.com/tutorials/how-to-create-brilliant-light-streaks-in-photoshop/
When It Comes to Step 4, Filter > Distort is Unselectable.
What's Wrong?

So you have OK'd the Lighting effects, and made a copy of the layer using Ctrl j (or Cmd j) ?
You then use Ctrl t to free transform the copied layer?  While the handles are still active, right click, and you should be able to see a list of transform options including Distort.   You can alsojust use the Ctrl (Cmd) key while in Free transform, to give you control of individual handles.
I did wonder, just for a moment, if Distort is not available in 16bit mode, but I just tested it and it is fine.

Similar Messages

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • We have two iTunes accounts on one computer. Why is my music, apps, etc showing in my husbands account? home sharing is not selected

    We have two iTunes accounts on one computer. Why is my music, apps, etc showing in my husbands account? Home sharing is NOT selected. This recently became an issue when we added additional devices. Now we keep getting each other's apps!

    Se descargan aplicaciones para mi iPad 64 3G, las cuales en el momento de sincronizar no pasan a la iPad debido a que solicita una autorizacion para el ordenador la cual se autoriza con ID y el Password, esta orden se procesa y vuelve a solicitar nuevamente la autorizacion y asi sucesivamente.
    He intentado creando nuevas cuentas y desinstalando iTunes y volviendolo a instalar.
    Favor de orientarme en la solucion adecuada para el asunto comentado anteriormente.

  • Why can I NOT select March 2013 Month Display in iPad's calendar ?

    Why can I NOT select March 2013 Month display in iPad's calendar ?

    Just found out that I had subcribed for a calendar which shows the numbers of the calendar weeks. Turned this off and no crash anymore.
    How can I get the number of calendar weeks in a different way. So that no crashes occur?

  • Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

    Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

    I have an Edit In - Photoshop option, but not an Export - Photoshop option.
    Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected.  I assume this is not the problem, and that the photo is selected.
    Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
    If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

  • Why can I not select SD versions of SD programs I purchased?

    Why can I not select SD versions of SD TV programs I purchased? When I go to my program to download it. I click the SD button, that is what I paid for. It will not move over to the SD version to allow me to download it even though I have received notification that I have a new program waiting.

    I found my own solution. While in the Itunes store I did a search for the program by name of the current season. It brought up a list of the current season and it showed that I had an undownloaded episode of the program. I hit the download ad it completed the SD download.

  • Why is select calendar and address book greyed out? Why can we not select these options?

    Why can we not select address books or calendars? Why is this option greyed out in ITunes 12?

    You have to make the selection active.
    Go to Select>all, then Select>modify>border.
    Another way is to use a stroke:
    Open your picture file
    Go to Select>all
    Open a blank layer above this
    Go to Edit>stroke(outline) selection. In the  dialog, enter the width of the stroke, choose color, place it inside, ok it.
    If you don't like the border, delete the layer with the stroke, and adjust to suit, then do it over starting with step #3

  • I restore my US version  iphone 5s  by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

    i restore my US version  iphone 5s  by connecting itunes after restore it shows hello and select country, and activation, but it does not activating why? is it work in china ?

    If the iPhone is locked to a US carrier, you cannot use the SIM card of another carrier on it to either activate it or use the iPhone.
    If you want to use your iPhone with China unicom, you need to get it unlocked by your US carrier.  Contact them to see what their unlocking policy is and if you qualify.

  • Why is airplay not selectable after sleep?

    Why is airplay not selectable after sleep?
    Even if I was using airplay prior to sleep, on wake up my MBP defaults to internal speakers and airplay is not selectable from the drop down menu. I have to reboot, which works but is tedious. Macbook Pro Retina, 3Ghz i7, OS10.9.5

    Why is airplay not selectable after sleep?
    Even if I was using airplay prior to sleep, on wake up my MBP defaults to internal speakers and airplay is not selectable from the drop down menu. I have to reboot, which works but is tedious. Macbook Pro Retina, 3Ghz i7, OS10.9.5

  • Why does apple tv play my photos randomly in screen saver mode when random is not selected

    why does apple tv2 play my photos randomly in screen saver mode when random is not selected?

    Thanks for that.
    Random is not selected in transition or anywhere else. Unless I am missing something in the settings.
    So why is it playing my photos ramdomly in screen saver mode ?

  • Adobe Acrobat X Pro on Mac does not select duplex print by default

    I have Adobe Acrobat X Pro 10.1.8 for Mac. When I print a document, Acrobat does not select duplex print (i.e. "Print on both sides") by default. While I can manually select duplex print, I don't understand why this isn't the default option here as in every other application. Just for reference, here is a screen shot of my default print screen:
    I have played around with duplex printing in the advanced properties of PDF's. I have also played around with the DuplexMode property in the com.adobe.Acrobat.Pro.plist file. Actually, there is no DuplexMode property in the file, but I tried making one, which didn't solve the problem. There is a printBookletDuplexMode property but that doesn't seem to make a different. In any case, nothing has worked.
    There are some similar questions on the forums, but they are either slightly different or haven't been answered. Is this such a difficult issue?
    Thanks for any help,
    Jonathan
    Message was edited by: jondaman21. Small clarification to what I've tried.

    I agree with your statement; even for a particular document, if I choose to "Print on both sides" and then print again immediately after, "Print on both sides" will be deselected.
    However, I'm not sure what you're implying by you're statement. I'm asking precisely why this setting isn't sticky. Acrobat uses a non-standard printer dialog; in the usual dialog I can easily set a defualt duplex setting. I almost always want to print duplex. Why can't I do this by default in Acrobat?

  • HT1386 when i plug my iphone to my computer it says, apple mobile device has not started. why?

    when i plug my iphone to my computer it says, apple mobile device has not started. why?

    Your computer could possibly be running in selective startup mode where any nonessential services are disabled temporarily until a restart.  If that isn't the case you can check out http://support.apple.com/kb/TS1567 for information on restarting the Apple Mobile Device Service (AMDS) on Windows computers. 

  • F.19 GRIR reclassification - Item not selected in the report log

    Hi Guru,
    There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while wiht cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. pls advice, I really donot have any clue about it.
    Thanks,
    Kick

    Hi All,
    why nobody reply this question, is it the question not clear?
    There are two items (one cleared pair) which are not selected into GRIR reclassification (Tcode F.19), both posting date is on 30.05.2007, while with cleared date on 30.06.2007 (clearing document with posting date on 31.05.2007), why they are not counted in the reclassification report. the reclassification has been done on the last day of May.  pls advice, I really donot have any clue about it.

  • CUCM 10.5 - Order of trunks in Route Group ignored...Not sure why

    Question #1   
    I've had a voice mail pilot number working for a long time now.  It's MS Unified Messaging (MS UM for short).  Since we have more than one MS UM server, I thought I'd go ahead and create a SIP trunk for each of the MS UM servers and then put them in the existing Route Group (RG).  I thought I'd go ahead and reorder the trunk groups listed in the RG just to be sure my configure for the new trunk groups was correct.  I have the SIP Options Ping enabled in my SIP profile and I do see all the MS UM SIP trunks with a status of 'Full Service'.  Anyway, if I place one of the newly added SIP trunks for MS UM at the top of the existing RG, my calls are still ending up at the original MS UM server.  It's like CUCM is ignoring the fact that I placed the new SIP trunk at the top and it keeps routing to the old/existing SIP trunks/MS UM server I had in this RG.   I tried resetting the SIP trunks and also reset the Route List (which I didn't think I'd need to do, but I did it anyway) and the result is the same.  It won't select the new SIP trunks no matter what I try.  
    I didn't try removing the original SIP trunk from that RG yet and I don't want to do it during the business day, but I could try that after hours and see what happens then.  
    Any ideas about why it won't use the new SIP trunks even though they're in service and at the top of the RG list (higher priority), above the original SIP trunk?  My RG is set for top down, not circular.  
    Question #2:
    Here's a somewhat related question.  (screenshot attached for this one)  I first thought I could simply go to the original SIP trunk and add the other IP addresses for the ofther MS UM servers so I wouldn't need to create more SIP trunk groups for this.  Maybe I'm understanding it wrong, so please enlighten me what these fields are really used for.  On the SIP trunk page, there's a SIP Information section and that's where you add the IP address of the device CUCM is talking to (Destination).  For example, the MS UM server.  Was I wrong to assume that if the SIP trunks would be identical in their config you can simply add the other IP addresses for the alternate MS UM servers here in this section of the SIP trunks page?   What exactly would the extra IP address fields be used for (when you click + to added another address)?   
    As soon as I added a second IP address, my calls to MS UM stopped working.  After I removed the second IP (which is for an alternate MS UM server), everything started working again.  Just curious how that IP address field should really be used.  For now, I simply created new SIP trunk groups for the other MS UM servers.
    Thanks :-)

    Hello,
    For me both questions are related, and I expect a communication issue between CUCM and the new MS UM server.
    I would like to start with the 2nd question as it answers both, the below is mentioned in the admin guide of CUCM 8.5 but no much explanation was added to the admin guide of 10.0:
    "•When an outbound call gets placed, a destination address gets chosen randomly. No preference is given to one destination address over another. All SIP messages that are sent out for a given outbound call go to the same destination address.
    •The SIP trunk accepts inbound messages from any of the configured destination addresses."
    The above answers your inquiry, redundancy cannot be achieved by configuring multiple destinations. And calls are dropped when you add the new ip address within the same trunk, because it was chosen but the CUCM was not able to communicate with it, and also this explains why the new MS UM server trunk was not selected in the RG, as CUCM also was not able to communicate with it and moved to the next member in the RG (i.e. the old MS UM).
    - Can you try to ping the new MS UM server from CUCM server, SSH to CUCM server and issue the following command: utils network ping IP_ADDRESS_OF_NEW_MS_UM
    - It can be that the new MS UM server is configured to accept only SIP UDP messages, can you try changing it from the SIP security Profile?
    If the above two suggestions did not help to isolate the issue, then we need detailed CCM logs covering test outgoing call together with the IP addresses of both MS UM servers.
    Thank you,
    Shadi

  • FOR ALL ENTRIES IN - Not selecting all Records

    Hi,
           SELECT obknr ppaufnr ppposnr
                         FROM ser05
                         INTO TABLE gi_ser05
                         FOR ALL ENTRIES IN gi_objkpo
                         WHERE obknr EQ gi_objkpo-obknr
                           AND ppaufnr IN so_aufnr
                           AND ppposnr EQ '0001'.
                  IF NOT gi_ser05 IS INITIAL.
                      SELECT bwart matnr menge dmbtr aufnr
                       FROM aufm
                       INTO TABLE gi_aufm
                       FOR ALL ENTRIES IN gi_ser05
                       WHERE aufnr = gi_ser05-ppaufnr
                         AND bwart IN ('261','262').
                  ENDIF.
    In debugging, this code is fetching 129 entries in gi_aufm.
    Where in AUFM table for same WHERE Conditions there are 139 records.
    Why it's skipping Records?

    HI ,
    SELECT obknr ppaufnr ppposnr
                         FROM ser05
                         INTO TABLE gi_ser05
                         FOR ALL ENTRIES IN gi_objkpo
                         WHERE obknr EQ gi_objkpo-obknr
                           AND ppaufnr IN so_aufnr
                           AND ppposnr EQ '0001'.
                  IF NOT gi_ser05 IS INITIAL.
                      SELECT bwart matnr menge dmbtr aufnr
                       FROM aufm
                       INTO TABLE gi_aufm
                       FOR ALL ENTRIES IN gi_ser05
                       WHERE aufnr = gi_ser05-ppaufnr
                         AND bwart IN ('261','262').
                  ENDIF.
    in above code where you are getting  Less Records
      Because from above code it seems that  you  not  selected
    MANDT
    MBLNR
    MJAHR
    ZEILE from table aufm 
    which is primary key of table AUFM   and  all records are depended  on  entries in table  gi_objkpo  which you are using for
    all entries   .
    so first check  data in table by passing values according to where condition  .
    Regards
    Deepak.

Maybe you are looking for

  • Header and Footer in a BEx report

    Hi Everyone, I have a requirement where I need to provide a space for the user to sign-off with their name and signature at the bottom of the print-out of a BEx report. For this purpose I need to provide a space at the bottom of the report where the

  • Battery status won't hit 100% anymore

    I've had my PB about a month and a half (got it new believe it or not) and recently I noticed that even though the battery status will say "charged", the percentage will not show 100% when plugged in. At first it was 99% and now it's 97%. I've calibr

  • 4/14/2015 - Release - Flash Player 17

    The next version of Flash Player is available for immediate download.  In today's release we've updated Flash Player with new functionality, critical security fix.  We recommend all users update to the latest version. Security update details can be f

  • FrameMaker 9 - Autonumbering of Tables/Figures not working correctly

    I have a multi-chapter book. My autonumber paragraph definitions for "Figure Title" and Table Title" are:      F:Figure <$chapnum>-<n+>      T:Table <$chapnum>-<n+> My other autonumber tags are:      C:Chapter <n+>      A:Appendix <A+>:      L:<a=1>)

  • I want to cancel the application inadvertently purchased

    Hello; I want to cancel the application inadvertently purchased . Order: MH*****5WG Bill: 188*****146 Alınma Tarihi: 01/03/13 Thanks. <Edited by Host>