My distro needs login and password when I boot

As the title suggests I do not what I am supposed to enter when faced with a login and password right after I boot.

Xyne wrote:
tamas wrote:
When I say password I mean I have not completed the install. This prompt for login/password occurs before I actually do anything. I occurs after I boot and select install and the installer prompts me for a login and a password.
Thank you for your help in advance.
-tamas
login: root
Just hit enter for the password. I think it's empty by default.
"arch" is also a valid login.
After that, to run the setup, just enter "/arch/setup" at the prompt.

Similar Messages

  • Why does my iMac now ask for my login and password when trying to drag anything to the trash?

    Hello,
    I have the new iMac and am now having issues trying to delete anything off my desktop. It is telling me that Finder wants to make changes when I try to drag anything to the trash. I have to constantly resubmit my login and password and then the item just disappears, does not remain in the trash to be emptied later.
    I am not sure what happened because it never acted like this. All of my software updates are current and I don't get why my Trash is no longer working as it used to.
    Any advice?
    Thanks!

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Send Email for manager of the user with Login and Password the user.

    Hello everyone,
    I need to send an email to the manager of the user with login and password when it is created in AD.
    I already have a mail server configured in the IT Resource. It has some component of the IDM that solve this issue?
    Anyone you help me with the next steps?
    Thank you.

    Thank you for your attention.
    It did not work, I did another test to send email notifying you when the User change password.
    The following error message appears in oim_server1-diagnostic.log:
    [2011-08-08T19:21:30.865-03:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Resetting password
    [2011-08-08T19:21:30.936-03:00] [oim_server1] [NOTIFICATION] [IAM-0080013] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Kernel executing default validation with process id, event id, entity and operation 59,612.0.User.RESET_PASSWORD
    [2011-08-08T19:21:31.155-03:00] [oim_server1] [NOTIFICATION] [IAM-3050013] [oracle.iam.identity.usermgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Searching for users with the specified criteria.
    [2011-08-08T19:21:32.018-03:00] [oim_server1] [WARNING] [] [oracle.iam.passwordmgmt.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Sending Reset Password Notification is not successful
    [2011-08-08T19:21:32.639-03:00] [oim_server1] [NOTIFICATION] [IAM-0080046] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Completed orchestration with action result - oracle.iam.platform.kernel.vo.EventResult@4fe0d018
    [2011-08-08T19:21:32.642-03:00] [oim_server1] [NOTIFICATION] [IAM-0080011] [oracle.iam.platform.kernel.impl] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: 88a924181f586e03:-25ab9c82:131aa884464:-8000-0000000000008862,0] [APP: oim#11.1.1.3.0] Orchestration process with id 59,612 started running in a new thread.
    Edited by: Piza on 08/08/2011 15:24
    Edited by: Piza on 08/08/2011 15:26

  • Console login and password

    after installing my new solaris 10 x86 platform, the system asks for a console login and password when I have not set any.thus it makes it difficult to boot

    Hello Michael,
    the username is <b>root</b> and the password is the one <b>you</b> assigned during installation.
    If you can't remember what you assigned, boot from cdrom into single-user mode, mount the / slice and clear the password entry in /etc/shadow.
    Maybe you assigned no password at all. Just press enter.
    To use SMC (Sun Management Console) a password is required ! Assign a new one with the <b>passwd</b> command.
    Michael

  • When i try to log in to places like facebook and other places that need a login and password it always goes back to a clean screen and requires you to login again..i have a mac pro 2014

    Help please...I can't login to anything....facebook....ipiccy....I can get into websites but if it asks me for my login and password just boots me out.

    login implies encryption, and encryption requires the date&time be within five minutes of perfect. ¿Is the date & Time set correctly?

  • Somehow firefox now opens with my windows mail. Each time I enter my password it asks if I want to save it so I don't have to retype my login and password each time. I hit yes and when I leave firefox it doesn't keep my password. I would like to either

    I recently went to open my windows live mail,which normally opens because it has my login and password saved. Now it opens in firefox and I have to retype my login and password everytime I open my mail. I would like when I open my mail not to have to retype my login and password as this is why I have it set up in the original windows mail anyway. So I have attempted to live with this problem by adjusting the options to save my password and when I close out of firefox and try to reopen it later in the day I have to retype my login and password again.
    == This happened ==
    Every time Firefox opened
    == about a month ago

    See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
    See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

  • Do i need a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    after having my mbp upgraded  with new m.lion by apple tech service i noticed that applications like iphoto, garageband and imovie are gone
    researched online and was told that i had to acess the `purchase` via AppStore where it asks me to log in with Apple ID and password
    i used the usual admin login and password and didnt work, also on itunes and icloud the similar case
    do i need to register with a separate appleID and password for itunes store, icloud and app store apart from my admin login and password?

    Just use the same Apple ID and password that you used to access this forum - that's your Apple ID.
    The user name and password on your computer has nothing to do with your Apple ID.
    Good luck,
    Clinton

  • When I logon to iTunes on my iPad it takes my login and password but the apps I'm trying to download don't install?

    When I log on to iTunes on my iPad to install apps iTunes accepts my login and password but doesn't download the apps.  How do I fix?

    Were thse apps you're downloaidng fresh or updating them?

  • When I enter a website, FireFox used to auto login and password. Now is does NOT. If I choose remember me check box, the website remembers me but I still have to enter a password. I think this is a problem created with website programming.

    The problem is with most websites but not all. When I try to login to this website to ask this question, I have recorded 3 logins. Only one works, but that is a different problem. The websites used to automatically login and suddenly don't. I believe the problem is a change in programming for the website programmers. I found a solution (not a viable one) previously here that is supposed to remember login and password through a laborious process, but that is really cumbersome and doesn't always work either. Today I cannot find that process to try it. I am trying to login to ATT website which was just changed.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • Why if my iCloud info is the same as my iTunes login and password does it say the account name or password is incorrect when trying to log in

    Why if my icloud info is the same as my itunes login and password does it say the account name or password is incorrect

    Oops
    Forget that, wrong forum.

  • Printer is asking for an user acces code instead of windows login and password?

    I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
    One thing i have noticed  is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
    Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
    We do not need this access code promt instead we need the usual windows login and password that used be there originally.
    alsothis is how the settings look like after a cold reset somtimes when it does not  asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

    @munish259272 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

    So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally.  Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
    works) which also starts locking users AD accounts out due to failed login attempts (somehow).  If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues.  Once Outlook has authenticated, I can
    turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
    Any ideas?

    Hi,
    According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
    If I misunderstand your concern, please do not hesitate to let me know.
    It’s normal. This caused by the difference between basic authentication and NTML authentication:
    Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
    but in all earlier versions, you will have to enter creds every time.
    NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
    at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • What are the username and password when i click the ICM of JavaEE5@SAP

    when i click the ICM of JavaEE5@SAP in the sapmanagement console mmc, It need i input the username and password for Web_admin, What are the username and password when i click the ICM of JavaEE5@SAP and which tools act the role as the VisualAdministrator of NetWeaver04s and NetWeaver2004s?
    thank you very much

    Hello Guoging,
    you can login to ICM with username Administrator and password abc123. That is described in the start.html file, which you can find in the unzipped Downloadpackage of SAP NetWeaver Java EE 5 Edition.
    You can use NetWeaverAdministrator(NWA) or config tool to configure this edition. NWA
    needs to be installed separately. If you have a default installation, go to
    C:SAPJP1JC00j2eeNWAdmin and execute the file install.bat. Ensure that NetWeaver is running, enter user Administrator und the Masterpassword you chose during installation and wait around 20 Minutes or more. NWA is started automatically after installation has finished in your webbrowser.
    For more information on NWA read the Administrationguide
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a>

  • OWB 10gr2 - Location Login and Password

    I can't find in which tables are stored login and password of locations.
    Thanks,
    Marco

    Hi
    Locations in OWB are like db links and i dont think that passowrds or user names of dblinks/locations are stored in Repository Tables(Plz correct me if im wrong)
    Locations point to the schema at which you are creating your objects using OWB. When you created a module and assign a location, it means that all the objects created in that module will be created in the Schema pointed by the Login Id of a Location.
    To get information regarding the schema/users/login you can go to design center and right click on the module and choose open editor. and then click on the .... Tab
    Ther you can find the schema/users/login as USER NAME and for passwords you need to refer to your DBA. You can also know the username from the Locations of Connection Explorer in Design Center.
    Please let me know why do u need this info.
    I hope this is what you were looking for.
    Regards
    Vibhuti

  • Passing a login and password while using JNDI  for RT jobs

    Why can we not pass a user name and password when using JNDI for Real Time jobs?  Can it be passed in the URL line or somewhere else that I'm missing?  This is frustrating as we actually have to connect using Anonymous with no password which opens up so many security holes that we simply can't go to production with this.  Please advise.

    you can set the login using the JNDI properties file and create the file in the classpath, but again the password will be in plain text
    please file a case with Support I think this can be added to JMS adapter operation (user credentials)

Maybe you are looking for

  • Pantone eye-one Display 2 monitor calibration software - auto starting

    Hi, I just calibrated my monitor using Pantone's eye-one Display 2 hardware and software (3.6.1). Now, when I login, the eye-one match software icon appears in the dock, bounces a few times, then disappears. The software instructions made no mention

  • How can I get access back to sounds and lessons I have not downloaded before updating?

    When I purchased my Mac about two months ago, I had access to all of the lessons and sounds, I just had to download them.  I recently downloaded and installed the update and in doing so I lost access to sounds and lessons I had not downloaded.  It te

  • Pacman defer updmap on texlive update

    Hello, today I update version of texlive is installed on my Arch. And I noted how much time it lost on updmap (done for every texlive updated package). I stopped the update and make a empty (a sh file with a echo) updmap to be called and run updmap a

  • Outlook Appointments received as email not calendar appointment

    Using enterprise server.  some outlook appointments are being received as an email calendar notification; not a calendar appointment that shows on my calendar.  I have V4.7.1.6.1 and my assistant has V5.0.0.975 and his BB Tour 9630 does not have this

  • Thread execute

    hi, What is the significance of following 1. thread execte number 2. execute queue length 3. execute queue throughput