My do not disturb is not working, when i turn it on my phone still rings and vibrates
My do not distub button is not working, when i turn it on my phone will still ring and vibrate
Do you have the screen off? If you're using the iPhone at the time, calls and messages still come through as normal.
Similar Messages
-
The remote does not work, when i turn the tv on I see the apple tv and the itune icon on the screen
the remote on apple tv does not work,when i turn on the tv Isee the appletv and the itune icon on the screen.
Did you do a software update?
AppleTV is unable to start properly. You need to connect to a computer running iTunes as detailed here:
Apple TV (2nd and 3rd generation): Restoring your Apple TV -
My do not disturb does not work on my iphone 5. I have tried changing to different settings, I have tried putting my phone to silent, turning it on, i have tried allowing calls from no one (always) and also tried switching it to when my phone is locked...the calls still come through...i turned off manual it worked when i tested it out, then i tried it again and the calls were coming through. I've basically tried changing all settings and different possibilities and my calls still come through
That is completely incorrect. The button that you are referring to is the Mute switch, which will turn off particular sounds and just allow vibration. Do Not Disturb turns off all notifications, and can be accessed via the Control Center, or Settings.
Another thing, this thread is 2 1/2 years old, and is from when Do Not Disturb was first introduced with a different iOS. Take a look at the link I provided earlier, and you will see the User Guide. You can read the difference between the activation of the Mute switch and Do Not Disturb.
While it is commendable for you to participate in the ASC, before you post something, make sure you look at the date of a thread, and that you are providing the correct information.
You have posted this incorrect info to three separate threads already, all that are at least a year or more old. WHY?! -
iPhone will not ring if locked when when Do Not Disturb is not on and the phone is not on silent (button on side is not red). This problem occurs regardless of whether it I have Do not Disturb on (manually, or scheduled) or COMPLETELY OFF. I've tried wiping the phone and reinstalling from a saved copy but of course the problem comes back because the problem is inherent in the save. There are two options under "Silence" at the bottom of the Do Not Disturb preferences. "Always" or "Only when iPhone is locked". Those are the only two options and I want neither. No amount of deselecting will work. It forces you to pick one.
Does anyone have a solution given that I've better explained the problem?The settings at the bottom of the Do Not Disturb page do not matter if you have the switch for Manual turned to off, or the Scheduled turned to off.
When the phone is unlocked, if you try to raise the volume of the ringer, what do you see on the screen? Does it say ringer, do you see the word headphones anywhere? -
New iPhone 5S
iOS 7.0.1 (latest)
Do Not Disturb does NOT work! It still lets in calls. I have tried all the settings to no avail. Even selecting block every call, all the time, the moon icon is showing, but the calls still come through!
What the?! Come on Apple... this is not rocket science. I've embarassed myself in public settings because this easy feature is broken!I think you are correct. Page 31 of the manual says:
Do Not Disturb
Do Not Disturb is an easy way to silence iPhone, whether you’re going to dinner or to sleep. It keeps calls and alerts from making any sounds or lighting up the screen.
Turn on Do Not Disturb. Swipe up from the bottom edge of the screen to open Control Center, then tap . When Do Not Disturb is on, appears in the status bar.
Note: Alarms still sound, even when Do Not Disturb is on. To make sure iPhone stays silent, turn it off.
Configure Do Not Disturb. Go to Settings > Do Not Disturb.
You can schedule quiet hours, allow calls from your Favorites or groups of contacts, and allow repeated calls to ring through for those emergency situations. You can also set whether Do Not Disturb silences iPhone only when it’s locked, or even when it’s unlocked. -
my macbook pro is not working properly , when is turned on after then show apple logo and continue show this or nothing
Gray, Blue or White screen at boot, w/spinner/progress bar
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
"Do not disturb" can not block "No ID CALL"
"Do not disturb" can not block "No ID CALL"
I tuned on Do Not Disturb and selected allow Favorites can call in. In iOS6 it can block the call No ID, but in iOS7 can not. Is it bug?Make sure your 'Show in Lock Screen' options didn't get changed for any of those apps you want to see. Mine are still showing up just fine with DND turned on.
-
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I did not on the "Do Not Disturb", but the phone still rings.
I did not on the "Do Not Disturb", but the phone still rings.
You can use the Do Not Disturb setting while your iOS device is locked...
From Here > http://support.apple.com/kb/HT5463 -
Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody
try restoring see guide
http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml -
hello I have a white MacBook when I switch it , the apple is still loading, and the window of aceuille not displayed! ,
<E-mail Edited by Host>Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead. -
"do not disturb" dose not function.
I am using iphone 4s and i upgraded to ios 6. but "do not disturb" does not function. do you have any advise for this problem
when i turned do not disturb on. nothing changes. i still get called.
-
Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
WIndows Server 2012 - Server Manager Error CLR20r3
WIndows Server 2012 - Server Manager Error CLR20r3 I have just experienced this error of ( CLR20r3) when trying to add or remove server roles. Server Manager crashes when trying to go into the Add/ Or Remove server roles What I have tried. .NET Diag
-
Strange error in CBS when enhance ESS/MSS
Hi all: I would like to setup JDI track for enhance ESS/MSS in ep7. I create a new track in CMS named as ESSD2 ( did not create product in sld ) I check in SAP_BUILDT , SAP_JTECHS, SAP-JEE into the CMS and I found there is 49 dcs in CBS -
-
Hello, I have a Toshiba laptop, model Tecra A11, part No. PTSE3U-05Q01P I have an issue with the operating system, Windows XP SP3, it doesn't recognize a device from the laptop and shows the Hardware wizard from Windows XP. The computer worked withou
-
Does this edition contain Enterprise portal ,KM and Coll.Please reply.Thanks.
-
Scans uncover same viruses/problems again and again even after quarantine and/or delete
I am on a MAC and I get endless 'rotating beachball.' A nightmare.