My dongle is not working with compaq 610

Hi,
I have Compaq 610 laptop which is around 2 year old and it is working  fine. Last week i brought "Micromax MMX352 3G USB dongle" but is is not working on my laptop.
Problem is that when i put dongle inside USB port, first it appears that laptop has detected the USB and try to install all dongle related software (automatically from Dongle stick) but suddenly (during installation), after around 1 min, USB sign disappears from laptop desktop and from device manager and after few second USB sign appears again in both laptop desktop and device manager. This process continue indefinatly.
Because of this Dongle is not able to connect as it shows message that "No device".
I have tryed the same USB dongle in different desktop (assembled and other company) and laptops (other company like HCL) and it is working fine.
Normal Usb stick (Pen drive) working fine on my laptop.
I have tried everything like:
1) Check device manager and uninstall "USB mass storage devide" (comes after putting USB dongle in USB port) and then USB dongle start installing automatically same process happens as described above.
2) Check the bios for USB port status and it is On.
3) Also disable windows firewall
4) Disable Virus protection software.
any help pls....
my E-mail: {Personal Information Removed}

Hello ashishgarg
What model laptop do you have? When I search for the Compaq 610 I see several laptops and want to make sure I provide correct steps for your model.
How Do I Locate the Model Number on the Service Tag
Since the USB dongle works on other computers the problem seems unlikely to be a problem with the dongle. Have you tried a different USB port on the laptop? Also are you using any type of HUB or docking station to attach the dongle? Based on your description it sounds like midway during installation the device is “disconnected” and “reconnected” to the computer.
I have experienced a similar problem on my own personal laptop where sometimes dongles that are large, aren’t held well enough in the USB port. This can be for multiple reasons. One case I had was the USB dongle was a bit heavy. As a result the contacts would disconnect as its weight pulled it down. In my case the solution was to put something on under the dongle to “hold it up”. This prevented the disconnecting.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

Similar Messages

  • DAT 12\24 Not working with COMPAQ prosignia 500

    Hi all,
    I have one Compaq Prosignia 500 Server with me.
    OS installed on this is Novell netware 4.12
    earlier we have DAT Drive of Seagate (4\8 GB)
    Now we have to change it with HP (12\24) GB as 4\8 DAT notr wokring & not
    available in Market easily.
    problem we face is that Prosignia server show This DAT Drive
    with SCSI ID 6 .
    But on consol in disk Inforantion , this DAT Drive is missing
    due to this we are not able to take backup
    pl. Give solution if any

    Don't believe this has anything to do with queue based printing ..
    suggest you post to the backup newsgroup instead.
    Peter
    eDirectory Rules!

  • Huawei e180 not working with Lion!!... working fine on Windows PC's but not on new macbook pro. new user to apple

    Any suggestions on why mobile broadband dongle will not work with 10.7. Mac see dongle, opens folder, but returns error message when try to launch.. NEW USER TO MAC

    This thread is a couple of years old but it may answer your question?
    https://discussions.apple.com/message/8978867#8978867

  • My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

    My ProFire 610 is not working with the OS X Yosemate what do i have to do now with my audio card?

    Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
    Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

  • Vodafone K3520 dongle not working with LION.

    Hi guys and girls.
    Have had my Vodafone dongle used on my laptop for 2 and a half years without any problems.
    Installed Lion last night and now the dongle does not work. Tried downloading the latest K3520 software from Vodafone's website but says it is incompatible. Have loaded the OLD Vodafone dongle software and still can't get a connection.
    LM2

    Hello londonman2 and Markymark1
    your links are not active anymore.
    Are you still using Huawei E169 (E169G, E169V, K3520)?
    I have Mac OS X Yosemite 10.10 and would like to use it with this OS.
    I searched some solution almost everywhere.
    Here is nice info...
    http://www.3g-modem-wiki.com/page/Huawei+E169+(E169G,+E169V,+K3520)

  • Bluetooth USB Dongle does not work

    I have this generic looking USB dongle (forgot the brand) that I use with my eMachines e725 laptop. It worked fine with Linux Mint 9 KDE 64bit that I had to use for the past 1.5 years. The moment I plugged the dongle in, it was instantly detected and the bluetooth icon turned active in the system tray. However it does not work with my ArchLinux 64bit install with KDE4.6 (updated to latest packages). Due to issues with the new Kernel 2.6.39 series, I am using the LTS kernel.
    lsusb:
    Bus 003 Device 009: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
    tail -f /var/log/messages.log
    Jul 10 17:56:26 localhost kernel: [11565.480026] usb 3-1: new full speed USB device using uhci_hcd and address 9
    Jul 10 17:56:26 localhost kernel: [11565.728190] usb 3-1: configuration #1 chosen from 1 choice
    I've installed bluez and bluedevil. In KDE System Settings, when I go to the bluetooth options, it says no bluetooth adapters have been found.
    Last edited by MetalheadGautham (2011-07-10 13:28:51)

    Have you read the Bluetooth wiki page?
    Seems to me you didn't run the relevant daemon.
    Also, your thread title should include 'bluetooth' - 'USB dongle' on its own is too generic.
    Last edited by tomk (2011-07-10 13:12:28)

  • MBP CD2 DVI to VGA not working with projector

    I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
    A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
    My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
    As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
    Any ideas, any help, any answers?

    Here are the actors in our play today
    1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
    2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
    3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
    4. DELL 2300 MP projector
    Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
    In Display preferences we see for the MBP B
    Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
    VGA Display
    Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
    Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
    I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
    This is a problem!
    So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
    I shut down/restarted the MBP B.
    I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
    Enter the iBook!
    I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
    iBook display prefs reveal:
    Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
    Color tab: Generic RGB Profile
    VGA display, 1024X768, colors: Millions,
    Now. I unplug adapter from iBook, iBook readjusts to native display
    plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
    Scene 2: The FREAKY thing!
    Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
    Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
    Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
    Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
    Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
    Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
    So, I plug back into iBook-projector. And the iBook works immediately again.
    I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
    Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
    Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
    Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
    So,
    I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
    Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
    I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
    Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
    Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
    Back to the good ol' iBook. Of course it works.
    Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
    Now switching over to MBP A- DOESN'T WORK.
    As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
    Any thoughts, ideas, ways to diagnose? Thanks!

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Application is not working with mouse

    Dear All,
    We have a strange issue in the our application (Oracle form) in the one of our client machine.
    Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
    Our Applications server is in Other country and client are accessing from India.
    This occurs for some user and not for all.
    Application server Version          10.1.2.0.2.
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
    Java Plug-in version 1.6.0_31 .
    Please any info will help us lot.

    Thank you for the quick replies Michael Ferrante and HamidHelal.
    But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
    Even the java control panel is not working with mouse.
    For other country customers everything working fine.
    So its difficult for me to apply the patch with these uncertainties.
    Checking with fresh java installation and let you know the status.
    Thanks.

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

  • On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

    on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
    i cant see menu page on display screen

    http://support.apple.com/kb/HT1808

  • Caller ID not working with Nokia 6600?

    I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
    But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
    15" Aluminum Powerbook 1.5 GHz   Mac OS X (10.4.5)  

     
    mdcdsc wrote:
    My caller ID does not work with the new ap either.  I don't like the new ap at all.  The old one was beautiful.  Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD.  The caller ID was my favorite thing with the old ap.  and now it doesn't work.  I have followed the instructions and turned everything on, but it just does not work.
    The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
    On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

  • Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

    Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

    Please check the Play Store app for any Flash updates and install them if present.

Maybe you are looking for