My drawing turns to pixels after I edit a copied graphic

I have notied similar occurances over the last couple of days ...
I have found that edited grpahics that were previously fine start to be pixelated instead of vector. I can still edit the lines and anchor points but it is shown with pixels.
This has happened under a number of circumstances.
- copy a grphic from one drawing to another .. the first one is fine, the 2nd blaah
- I completed a drawing then renamed it to edit it .. the edits are no longer displayed as vectors.
I have the before and after files .....
Before https://dl.dropbox.com/u/6527347/Sportstest%20-%20Pattern.ai
After https://dl.dropbox.com/u/6527347/Sportstest%20-%20MTB%20Pattern.ai
I am using CS6 ... and I am still very much a baby user
Many thanks for any help

Mylenium
Thanks for your time
But I am really lost ... as I said .. a baby-user.
1) Is the original file ok? The gradient fills and logos look fine on the file.
2) If I need to rebuild the files from scratch (I need to have the same graphic colouring), can you suggest how I ensure that the file is correct and adaptable as I will be using the same design but different colours for other files?
I appraciate your help
Steve

Similar Messages

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein

Why is my image more pixelated after changing the DPI?

I am creating a magazine for a university project and I have chosen 2 images to be included in one of my articles. I changed the DPI of both images in PhotoShop to 300 DPI and saved them before placing them into my InDesign document but they appear to be even more pixelated after this than what they were when I placed them straight from the internet. Will they be like this when I print it or does it only look pixelated on my screen? Any help?

What is the effective resolution in InDesign? (look into the link panel.) (BTW resolution of an image is measured in PPI, not in DPI!)
Is the link up to date?
How do you proof it? Did you turn on the high quality display?
What file type are you using?
What is the scaling factor of the image in InDesign?
How did you change the resolution in Photoshop? What was the first resolution, did you change the size of the image?

IPhoto for iOS removes the GPS exif data from the photo after an edit

iPhoto for iOS removes the GPS exif data from the photo after an edit
Using the iPhone camera, I take a photo and then I want to make the photo a little brighter.
So, I edit a photo using iPhoto for iOS and then save the photo back to the camera roll.
Now, I might want to see where that photo was taken via another app (like Photo Mapo) or on the map using the Photos app, or even the Mac iPhoto app.
However, the GPS data has been removed. Looks like all of the other exif data is still in the photo.
Why not just have a feature to remove the GPS data if the user wants? no reason to remove it for them.
The user explictily chose to have location services turned on so the GPS data would be in the photo.
Is this a bug?
Thanks,
Brian.

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
None of my cameras has a GPS function so I never see that data in the info of a photo in iPhoto for iOS. But I do see the map choice to set a location for the photo. Perhaps a reboot will fix this for you.

Illustrator cc image looks pixelated after saving with transparent background

as the title states; image looks pixelated after saving with transparent background...
i created a logo in adobe illustrator cc and i wanted to saved it for web in order to be able to copy and paste the logo where ever I wanted but the image looks extremely pixelated after saving as an png, and for web. Is there a solution for this?
Any help is appreciated.
Thank you!!
Jon

What DPI did you save as:
You should always save as 300dpi, then you can always reduce the size as needed.
Another thing, don't copy and paste, that always causes that Problem.
In Acrobat you should open Tools Menu click on Content Editing the Add Image.
Then click on image and choose Properties and place where you want and size as you desire.

Stuck Pixels after Installing iPhone 2.0.1 Update

Has anyone else noticed any new stuck pixels after installing the iPhone 2.0.1 update?
As you can see in the image linked to below, my 8GB iPhone 3G began displaying a stuck pixel in the upper-left immediately after installing the 2.0.1 update. At first, I figured that this was an average stuck pixel that coincidentally appeared immediately after applying the 2.0.1 update. However, after further examination, I don’t think that this is a normal stuck pixel.
http://skitch.com/macmanx/1igt/stuck-pixel
A few hours later, my mother updated her 8GB 1st gen iPhone, and as you can see in the image linked to below, she now has a vertical line of stuck pixels in the same region as mine. Since her stuck pixels also appeared immediately after installing the 2.0.1 update, I’m beginning to think that my stuck pixel may not be an isolated issue.
http://skitch.com/macmanx/1i88/stuck-pixels
I have tried to restore both iPhones, adjust the brightness, apply light pressure to the stuck pixels, and run the Knox Pixel Fix for iPhone. Neither method worked. To further complicate the issue, the stuck pixels appear to flicker when viewed through the LCD screen of my digital camera.
Stuck pixels are (as the name implies) stuck, they do not flicker. This, added to the fact that the issue occurred immediately after applying the 2.0.1 update, leads me to believe that this may actually be a software issue, possibly involving a conflict between the display drivers in the update and the display hardware shipped with certain iPhones.
If you have also noticed new stuck pixels after installing the 2.0.1 update, I'd love to hear that I'm not the only one seeing this. And, if you have somehow managed to resolve the issue, I'd love to know how you did it.

As already pointed out, "stuck pixels" are hardware related. They will be evident all the time, regardless of the particular screen being viewed. If they show only on particular screens, it isn't a dead pixel, but a software/ driver issue. I see a horizontal line in my Unlock Screen that I didn't notice before 2.0.1, but I'm not sure I really looked for it before. However, I don't see it in other screens with a black background such as the Home Screen, indicating it has something to do with the Unlock Screen image, and not the LCD pixels.
Message was edited by: modular747

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that

I have a 2007 iMac connected via WiFi. It has been working fine until I turned it on after a recent vacation. Network Preferences indicates that it is correctly connected to my WiFI system but the data input and output rate is virtually zero. I know that the WiFI signal is reaching the iMac since both my iPhone and iPad are working perfectly at that location. I have rebooted the router and the iMac to no avail. Any suggestions would be greatly appreciated. Thank you very much. Geoff

Hi Geoff,
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

My ipod touch 5 is charging from 12% to 56% on 1minute and then when its 56 it turns to 26 after 2 minutes what can i do please help me.

help my my battery life is really bad on my ipod touch 5 with ios 7.0.4
my ipod touch 5 is charging from 12% to 56% on 1minute and then when its 56 it turns to 26 after 2 minutes what can i do?, please help me.

Stop unplugging it.
At best, the percentage indicator is approximate and regardless of what your percentage indicator states, the battery will not go from 12% to 56% in one minute - and be able to run the iPod without dropping as much as yours does.
The behaviour that you cite is nothing unusual. If your battery is at only 12% when you plug it in, it will still take two or three hours (thereabouts) to be fully charged. In the meantime, the percentage indicator cannot be relied upon.
Charging a battery takes something like four hours from flat. So plug your iPod in and leave it alone for a few hours. The iPod Touch user guide for iOS 7 states that there is a battery icon in the top-right corner, which shows the battery level or charging status. It appears to be slightly different from earlier versions, but this is is what the guide shows:
I assume therefore, that when the iPod is fully charged, the lightning symbol disappears, leaving only the full battery.
If your iPod shows this lightning symbol when you put it on charge (not your % indicator, but Apple's icon), leave it on charge; check it every hour (maximum of four hours) to see if the lightning flash has disappeared. When it does, then - and only then - is it fully charged. At this time, when you unplug it, your percenatge indicator should show a much better level of charge.
Spend time enjoying your iPod instead of fretting about why a part-charged battery doesn't last as long as you think it should.
Message was edited by: the fiend

My iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I bought Macbook Air early 2014. Ever since i bought it to turn it on after a long ie. 5hr - 6hr i have to first charge it for at least 15 mins and sometimes it wont turn on for 3hr - 4hr and then it will turn on regardless of the battery charged.

I bought Macbook Air early 2014. Ever since i bought it to turn it on after a long ie. 5hr - 6hr i have to first charge it for at least 15 mins and sometimes it wont turn on for 3hr - 4hr and then it will turn on regardless of the battery charged. If i had put it on sleep even then it wont turn on it will work as usual as it is suppose to do. I went to icare twice and they game me the device back after 1-2 weeks saying it is now not giving any issue but when i will used it next morning again same thing happened. It's like i can never go out anywhere with the laptop outside as i have to first charge it and then turn it on. Icare wont replace my device they only say if there is any issue with the hardware we will replace that hardware but i think it is useless because they don't know what the issue is. Can someone help me out what to do now ? It's been to iCare ever since i bought it now i don't want them to again do the same thing.

Hi ..
Follow the instructions for resetting the SMC > Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

AppleScript to turn off Bluetooth after an hour of no usage

I'm interested in making an AppleScript that will turn off Bluetooth after a bluetooth device is not used for (let's say) one hour. The script should run only on battery life, not when the computer is plugged in.
Any ideas on how to start? Thanks.

I don't think there's any way (at least easy way) to do this.
AppleScript is very good at initiating events, but not good at responding to them. As such it's not easy to write a script in this manner. About the only way to do this would be to have a stay-open script that periodically checks the list of connected devices and keeps track of when the last bluetooth device was used - however, there's a big difference between being 'used' and being 'connected'... you may have a bluetooth headset 'connected', but if you're not running any audio apps it might not be used, and that's hard to AppleScript to determine.

I never had this problem before but all of a sudden when I go to "edit" a photo the photo turns black. All the editing functions appear but I cannot see any picture. When I hit "done" the photo reappears. Why can I no longer see my photo for editing pu

For years I have had no problems editing photos. However, for some reason when I go to "edit" my photo the photo turns BLACK/BLANK. The editing functions appear but I cannot see the photo. When I select "done" the photo reappears. Why is the photo disappearing for editing? Have I hit a command accidentally that is causing this? Really appreciate someone's assistance.

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #1, Repair Permissions, followed by Option #4, Rebuild Database, if needed.
OT

How do I stop my original photo from changing after I edit then save it in Raw 7

How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
Thanks for your help

Thanks for this great solution NoelHave a great day and weekend
Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png -Noel

My macbook pro keyboard backlight won't turn off, even after pressing F5

my macbook pro keyboard backlight won't turn off, even after pressing F5

Try resetting the SMC http://support.apple.com/kb/ht3964

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
I tried connecting the device to my computer and itunes said that it could not identify my device.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My drawing turns to pixels after I edit a copied graphic

Similar Messages

Maybe you are looking for