My drive label change back to upper case after reboot

I want to label my drive in mixed case like "Ext Drive", but after reboot, it become "EXT DRIVE". I can see "Macintosh HD" and "Time Machine Backups" in mixed case. Why I cannot name my drive in mixed cases?

>How about command -i
D'oh, it's because it's FAT32 formatted. That's why it cannot have mixed case.

Similar Messages

I just got my MacBook a few days ago and I was tired of the galaxy picture so I changed it to a color since I didn't have photos at that time well now I have photos and whenever I change my background it changes back to the color after I start it up again

I just got my MacBook a few days ago and I was tired of the galaxy picture so I changed it to a color since I didn't have photos at that time well now I have photos and whenever I change my background it changes back to the color after I start it up again.

You are still under warranty. Call Apple tech support and let them deal w/it.
You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Firefox 4 and the previous 3.x version fail to update changed user home pages? After reboot the ancent home pages reappear and the replace the now ones. Why & how to fix this software bug?

- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated!

- Firefox 4.0 is used as preferred browser
- One can change the user home pages. The new homepages are found & work ok after closing and reopening Firefox.
- However, after rebooting the laptop (HP Elitebook), old Firefox home pages reappear, they replace the new ones.
- If I remember correctly this bug appeared already prior Firefox 4.0, this malfunction/ bug was noted in some last winter version before the v 4.0.
- Help/ Bug fix is appreciated!

Why do re-named images changed back to original name after external editing

I batched re-named a number of images, but when i took one of the renamed images into PS by via the Aperture external editor the retouched file reverted to its original name when it came back into Aperture..... Why is this so? eg Original name was "STE_2200" then i added "2009" to all files to make this files new name "STE_22002009" but when it came back from PS via external editor it was "STE_2200" again. Why might this happen?

The above answer is correct. Renaming in Aperture after import only changes Aperture's VERSION NAME. The FILE NAME on your hard drive remains unchanged. Officially you can rename file names on import or export, but you can also do it when just moving the photos. For instance, from Managed to Referenced or from one managed location to another managed location, etc. I can give more details if anyone likes.

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

Won't Change Back to Regular Audio After Setting "Encoded Digital Audio"

I have a first generation Mac Pro, and I've just recently upgraded to Lion. I used to play a fair bit of DVDs on the computer, but recently I've slacked off doing that. Today I popped in a DVD to play and then opened DVD Player up. Everything worked fine as it was supposed to. I've got the DVD player set to send digital audio out so I can get surround sound through my receiver. When I quit DVD player I don't get sound anymore through the optical out unless it's encoded digital audio. I've had that problem before, and to solve it I'd go to Audio Midi Setup and change the format to what it was prior to being set to "Encoded Digital Audio" by DVD Player. However, now with the upgrade to Lion it will not switch back. The option to do it is there, and I can click on 16, 20, or 24bit audio all day long and I won't get audio output from that port unless I restart the computer.
This is obviously a system bug that needs to be reported to Apple if they aren't aware of it already, but what I'm wanting to know is how can I avoid restarting to get audio back? Restarting Core Audio doesn't do the trick as I've already tried that.

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Default for opening pdf files keeps changing back to 'save file' after I set it to open in firefox

Since upgrading to the latest Firefox version, my options for opening adobe pdf files have changed. I set it to 'use Adobe Acrobat in Firefox', it works absolutely fine, then some time over the next few days it changes itself back to 'save file'. Then I have to open options and change it again. This happened to me some years back with a much earlier version of Firefox - I can't remember how it was resolved, I think it just stopped doing it after a while. But it is most irritating!

I echo the request for Help! I've added Options to my Toolbar so I can more easily change "Save File" to "Use Adobe Acrobat (in Firefox)" as the default. Why does Firefox keep reverting to the save file default?

Outgoing email settings change back to "none" even after I save

Hi I hope someone can help me. My server is bellsouth/att and I have gone through the settings for my mailbox with them over and over. I have the correct settings. (smtp.att.yahoo.com) I have three accounts in my mail (version 3.6) and for some reason the outgoing settings after I enter the correct setting - hit save - reverts back to "none". It says I have no outgoing mail server. I have to go into each account and change the settings back to the correct setting each time I want to send something out for each account. Also, somehow I lost all of my emails for the last year in my primary email. I'm getting so frustrated - I don't know what happened to my mailbox! Can anyone offer advice? Bellsouth/ATT have no idea anymore!
Thank you
Jessica

Go to Mailbox > Rebuild. If that doesn't fix it, try removing the account. Also try removing the file ~(Home)/Library/Preferences/com.apple.mail.plist.

I can't change back to normal colours after toggling Grayscale

Hello all!
I was messing around with my phone yesterday, and this little black pop up window appeared all of a sudden, where I could change to Grayscale, Zoom in and out, etc just a tap away. I turned on the grayscale mode, had my fun, but then I could not find how to turn it back off, I tried everything already, I just need to find how to make that black pop up window come back
Please help!
Regards
RB

Hello,
If you have enabled Accessibility Shortcuts, try to triple-click on the home button and something called Accessibility Options should have popped up.
If it did show up, disable Greyscale.
If Accessibility Options didn't show up try doing this:
Open the Settings app > General > Accessibility and then turn Greyscale off.
Hope that fixed your problem,
Dmaster4391.

My external Firewire drive keeps coming up as read only after reboot.

Hello everyone,
I have a perplexing problem that just cropped up yesterday. I have an iMac (9,1) running Mac OS X 10.6.7. I've had the machine about a month now. I have an external 500GB Firewire 800 drive that holds all my iTunes music files. This was previously an internal drive in my G4MDD that I installed in an external exclosure I got from OWC. It's an EZ QUEST enclosure with an Oxford chipset. The drive is formatted Journaled HFS+, and I had reformatted it and copied all my files back over using Carbon Copy Cloner when I installed it in the enclosure. The drive is set in the Get Info window to "ignore ownership on this volume", and I have read/write permissions on the drive and the enclosing folders, including the iTunes folder. I can read the files, just not write to any directory on the drive.
Everything had been working as expected until yesterday when I started up the Mac and went to download a Podcast. The Mac informed me that it couldn't download the file because I didn't have write permissions. I checked the drive in the Get Info window, and everything was set correctly, but I noticed that I couldn't change the ownership options, as they were grayed out.
I fixed the problem by running DiskWarrior 4.2 on it, and rebuilt the directory. After that the drive was fine; until I started up today and was faced with the same situation. I was able to fix it again in the same manner, but would like to get to the bottom of the problem. A few other bits, the drive was recently defragmented with Drive Genius 3.1, and both that and DW and Disk Utility say the volume is OK.
I've been using Macs professionally and at home since '93 and this is my 5th Mac since that time. So I know my way around them, and I'm stumped!
Any ideas?

Oh, as part of this, not sure when the change was made, OSX used to keep the mounted volume name in /Volumes, even if the volume was ejected. Would cause an occasional problem - but very rare. I notice now that ML seems to create/delete these mountpoints automagically - and that's part of the problem. They get incorrect permissions when the volume mounts, and I (user I'm logged in as), can't write to the volume without some background shenanigans.
My process is this:
Unmount problem volume
Drop to terminal, and "sudo mkdir /Volumes/<mounted_volume_name>"
Remount volume via Disk Utility (you now get a "<mounted_volume_name> 1" - with CORRECT permissions)
Unmount the volume again
Remove the created directory (i.e. undo step 2)
Remount the volume - 99.9% of the time that seems to fix it.
Reboot to be sure - and it stays for a while - then at some point becomes a problem again.
Not sure if it's something in ML that's an issue - or something in iTunes or iPhoto (but can't see how they would affect the permissions when the system reboots and you login)

Imac 24" dvd-drive doesnt show inserted DVDs randomly, only after reboot (?

hi
i am very aware of this problem as my powerbook G4 had the same issue,
although its not a big issue i am worring about.
when i insert a DVD sometimes, lets say a commercial Movie DVD, an older burned DVD from 2002 or 2005 or even 2006, my brand new imac 24" doesnt recognize the inserted DVD randomly, not every day, but on some days........
when i start harddisctoolkit, it doesnt show the dvd, too.
the drive spins a bit, then stays calm.
i use to reboot then, and surprise, its always there!
what is it please?
thanks

hi purepeter-
have you tried resetting the smc?? http://docs.info.apple.com/article.html?artnum=303446 have you checked for directory damage using disk repair?? http://docs.info.apple.com/article.html?artnum=106214

ISDN doesn't change to state up - only after reboot

Hi,
i've a router 2801 with the card VIC2-2BRI, i've this problem:
when i plug-in in ISDN cable on the BRI interface the interface BRI doesn't change the state to up, it seems that the cable is not connected.
I need to reboot my router with the ISDN cable plugged in, and when the router starts, the BRI interface is active.
anybody know how to solve this problem?
This is my ISDN bri configuration:
network-clock-participate wic 3
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn sending-complete
voice-port 0/3/0
output attenuation 10
echo-cancel coverage 32
no vad
compand-type a-law
cptone IT
it use MGCP protocol to comunicate with my callmanager.
thanks in advance,
Claudio.

Try:
http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800swcfg/provisio.htm

Typing in remote Control when changing language with key combination of Alt + Shift some time change to Upper Case and Caps Lock is off

let me first say that this links dos not apply to my problem the first one is :
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/46b24b68-debf-466e-a780-66a3b999724c
and it dos not apply because I dont use remote app, and also i able to change settings
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/6a0f0eda-d3f6-4cd9-91ef-a7e0b20bc799/
this one has similar problem but he working with remote app and do not have the Upper Case and Caps Lock is off
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/f978e234-2b3c-4780-9dda-bec52b25330d
this one using XP i have it on windows 7 connecting to remote server 2008 r2
here is the issue
my users remote control a terminal services farm, now when they changing language to English some time it change to English Upper Case and caps lock is off ! then the Alt + Shift and the go back to English lower case and if they just play with
this (i mean they just use Alt Shift over and over to try to get back to normal state when you hold shift and alt and you change to English and back to Hebrew if you hold the alt shift one more time )
i tonic some thing strange ifi hold down first the alt and then the shift this issue happen more often
i upload a video on this showing the problem live on my dropbox :
https://dl.dropboxusercontent.com/u/103434771/meditowers/IMG_0245.MOV
here is how the normal setting should be
Alt + shift need to change to lower case English
then Alt shift one more time will go back to Hebrew
now if you hit on the caps lock you will be in English all the time with Upper Case

Hi Yitzhak,
Please refer to this post:
www.davidbond.net/2012/10/rdp-shift-key-gets-stuck.html
This post includes fix to this issue at the comments.
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

How do I male keywords (only) upper case in a JTextPane

I'm using a DefaultStyledDocument subclass to handle SQL syntax highlighting but what I want to do is ensure that keywords are converted to upper case so as to maintain a "good" style without the hassle of shift or caps lock.
Now, the StyledDocument seems the wrong place to implement this functionality as it should be just for display purposes while changing text to upper case is an actual change to the character values selected by the user.
The JTextPane class itself has a replaceSelection(String content) method but this relies on the text being selected.
I guess I could do this if I had a hook back to the JTextPane from my StyledDocument. When I find a keyword, select the text and replaceSelection.
Is there a cleaner way to do this?

Okay, top tip.
I added the document listener which processed the text on each insert.
At this stage, I've only implemented keyword checking on single character inserts (to capture changes as they are typed) - multi character inserts need to be handled differently.
If I have a character I know can signal the end of a SQL keyword (space, carriage return, brace, parenthesis, comment etc) then I jump back to the last space in the document. This gives me the last "word" in the document.
Remove the last character (as this is the character that has triggered the event) and then see whether it is upper case or not? If not, should it be (is it a keyword)? If so, insert the upper case String in its place.
It was a bit fiddly to put the pieces together (a document listener which then has to use SwingUtilities to make the change using a third Runnable class) but it does exactly what I ask of it.
I have to implement a similar algorithm now to cope with deletions (what if a delete the "a" at the end of "selecta") and multi-character inserts.
Thanks for the advice. I've not used DocumentListeners before so this was doubly helpful.

Create user for CPS in _ UPPER CASE LETTERS _ if using JSM on SolMan

only create users for CPS in UPPER CASE LETTERS if using JSM on SolMan
Dear CPS Admins,
If you plan to use Job Scheduling Management (JSM) on SAP Solution Manager together with CPS by Redwood please always create any users in CPS only with upper case letters to avoid issues in the communication between SolMan and CPS.
The user creation for CPS is done in the UME (Java user administration, alias /useradmin).
Actually the CPS user itself is only created in CPS during the first logon.
Both CPS and the Java UME are case sensitive. So you can create users in uppercase, lowercase or mixed letters. But of course the system does still not allow duplicate names. So you can either create MUELLERP, MuellerP or muellerp - but not multiple of them.
Now, if the SolMan communicates with CPS for Job Scheduling, the actual user name is taken in some kind of a "trusted RFC like" way and checked on the CPS system connected to the SolMan. If the current SAP user does not exist on CPS no activities are possible, neither in read mode (read existing CPS jobs) nor in write mode (change existing jobs or create new ones).
Unfortunately the Solution Manager transmits the current user name to CPS only in upper case letter. So if the CPS user was not created in UPPERCASE letters in CPS the communication will fail. Therefore, think about creating CPS users in UME only in UPPERCASE letters. Changing this later is difficult to impossible.
Best regards,
Peter

hi,
I tried to reproduce your issue but I was not able to create a UME user with lower case letters.
UME automatically converted the user name into upper case after saving. So even if I enter "cps" as user name UME stored the user name as "CPS".
(maybe that happend because of the existing SU01-UME integration in our SolMan system)
If UME would be case sensitive I would expect that it is possible to create the user "CPS", "cPs" and "cps".
Regarding the SolMan-CPS connectivity:
Transaction SU01 allows only upper case letters (in user name and alias). Since you're starting from an ABAP system only user names with upper case letters are supported. It's a technical constraint of the ABAP user management that user names consist of upper case letters only.
Kind regards,
Martin

My drive label change back to upper case after reboot

Similar Messages

Maybe you are looking for