My driver is missing from windows 7

Cant plug phone into computer says cant find bluetooth driver Phone is in devices but syas needs troubleshooting dont know where to download driver info cant get phone recognized in itunes please help

It's really not clear what you're asking. You talk about plugging the iPhone into the computer and then about Bluetooth. Which is it? Or both?
You cannot pair an iPhone to a computer using Bluetooth for anything but using it as a cellular modem. To connect an iPhone for synching with iTunes, use the cable that came with the device. If the computer doesn't recognize the iPhone, follow these steps: iOS: Device not recognized in iTunes for Windows
If you want to wirelessly sync to iTunes, you must use WiFi. Follow these instructions: iOS: Syncing your data with iTunes

Similar Messages

Unable to map drive to 4100 from Windows

Hi,
I have a 4100 and I am unable to CIFS map a drive to my NAS from Windows. I can do it fine from a Mac, but my Windows & PC's and 2008 server are unable to map a drive to the Share using the same credentials.
Am I missing something?
Thanks in advance,
Bob

Well I have not found any issues with W7 but.... Server 08 is another story! Since you are joined to the domain, have you verified that the join was "Actually" successful? This is one of those things that just does not make since, but because it is Vista .... err Server 08 Samba ended up being locked out.
What is your FW on the NSS6000?
If possible please post your logs as they can tell us alot, sometimes more than we want. My guess is one of two things, you are trying to access the share from a workgroup computer or we did not actually join the domain. Windows likes to make things easier for the user and will cache credentials, so you may want to log out and back in. Once back, try the map again. If it still fails and you are using domain creds, I bet the NSS did not join. Also, if your domain is something like "mycompany.local" and your domain NetBIOS name is "mycompanyHQ", you will not be able to join to a 2008 server.
Keep me posted.

Cannot install DVD/CD ROM drive after upgrading from Windows 7

I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

Hi,
The error code 31 means that Windows cannot load the drivers required for this device.
Considering that this issue mostly can be caused by compatible issue.
Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
mode to install.
If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
dvi: Rank - 0x00000000
Then, corresponds the score in this link:
Identifier Score
http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
Thanks for your understanding.
Kate Li
TechNet Community Support

Default Camera App Tile Missing and Won't Launch from c:\windows\camera. Also missing from Windows Store to reinstall.

Hi There,
I am deploying a custom windows 8.1 enterprise image via SCCM to Surface Tablets in our corporate environment. We currently are using windows 8 ONLY on surface hardware.
We only have 4 in the wild but all are having the same issue. The camera app tile/shortcut is missing from the all applications menu.
If I try to launch it from the c:\windows\camera folder i receive an error regarding Windows.UI.Xaml.dll as I believe it needs to be called via the modern environment (not desktop).
It dose not appear to be a hardware issue as third party camera apps seem to work.
Also, when i search for the app in windows store it cannot be found. I can find it when i search the store via IE but when I click on the link to open it in the windows store i am only presented with the stores front page.
Any advice would be appreciated as my users are keen to use the camera on their surface pro 3's.
Thanks

This sounds as though the Camera app has become corrupt in your image. I would attempt to reimage one of the devices with a vanilla environment to see if the issue appears, if not, I would
evaluate the difference between the Camera app in the vanilla environment and the production environment. Specifically, you may need to ensure that the correct version of Camera is provisioned in the base image.
Brandon
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

ICloud drive icon missing from iPad

My iCloud drive icon is missing from my iPad. I can't find a download for it in the App Sotre. Does anyone have any advice for restoring?

There is no iCloud Drive Icon on the iPhone or iPad. You access iCloud files through the Apps that support them on iCloud, I.e. , Pages, Numbers, etc.

Boot Camp Utility Missing From Windows 7

Hi all,
I'm running an 8-core Mac Pro blah blah blah with 3x1t hard drives. I've used the Boot Camp utility to make one of those 1t hard drives into windows 7. This worked perfectly, in fact I'm currently typing from Windows 7. However...
When I've done this previously there was always a Boot Camp utility within Windows 7 (in the bottom right of my task bar) which allowed me to switch back from Windows 7 to Mac, and vise versa... This time the Boot Camp utility within Windows 7 which allows me to go back to Mac has disappeared ... I'm stuck in Windows 7!
Any idea why this might be? And how I can might download Boot Camp or something to rectify this problem?
Thanks in advance,
Matt

Your OS X 10.6 DVD has the 3.0.4 drivers and you would then need to update 3x to get to 3.3
So do you or did you get to 3.2 at least? 3.0 and 3.1 were buggy.
Mounting and accessing HFS drive volumes was also causing BSODs; and does not work when there are Apple array volumes.
There is also and better place to look is control panels: Boot Camp with its own startup disk section
'x' on startup = Mac OS
Check Services and startup items. You should have
OSSwitcher
Apple TimeServices (without which time will be off every time you switch OS)
Programs control panel: Boot Camp there? try Repair.
Lion allows downloading Boot Camp 4.x driver from Boot Camp Assistant to put on USB device or elsewhere that you access in Windows.
www.apple.com/support/bootcamp guide faq how to articles etc
Maybe you have a corrupt system and time to do a chkdsk and also boot from Windows DVD and allow it to do system repair or restore from a good check point

UBS 3.0 Drive Missing from Windows Explorer after Drive Sleeps

I have an external USB 3.0 Hard drive that is present when the computer first starts up but is missing when the drive sleeps. I have to restart the computer to see the drive again. Is there a driver update or setting that I'm missing?
HP ENVY Phoenix 810-135qe.

Hi,
Your issue description seems to indicate that either your device has an issue and/or PC default settings have been changed.
Check the USB drive manufacturer owner's manual for PC power recommendations. Additonally, check with the manufacturer to see if there are known issues with the drive when the PC goes into a sleep state.
Go into the Control Panel ---> Power Options and reset the Plan settings back to the defaults and save. Now reboot and see what happens when you PC goes to sleep.
Look in Device Manager under USB controller and view the Power Management settings for the USB 3.0 hubs. You might need to uncheck the default setting to save power.
If the above suggestions don't work then perhaps a BIOS setting is corrupted. Clearing the CMOS will bring the BIOS settings back to the factory defaults.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

My DVD/CD RW drive has dissapeared from Windows. Help!

Somewhere during messing around trying to get a faulty Floppy Drive to work, now my DVD drive no longer shows up in Windows or is a recognized IDE during POST. I had to reconnect the cables a couple times while manuevering the Floppy cable and I also tried out some different nForce drivers. Im not sure which triggered it but I think I got a sign something went wrong rebooting windows during this troubleshooting stretch. Windows froze for the first time during load up and gave me that "Windows didnt load properly" message and something about the hardware changing. I thought maybe my Floppy was going to work now (it didnt) and then I noticed my DVD drive was no where to be found in My Computer. Oh boy.
So I made sure the IDE cable was connected properly, no change. I rolled back to the initial driver set, no change. Not sure what route to go next. The power light comes on and the drive ejects properly. The mobo just doesnt think its connected for some reason. Round cable gone bad? I hope my board isnt the culprite. Any help on this would be appreciated.

Could be the cable or could be the pins on the DVD drive (assuming your bios is set correctly). This problem would not be caused by windows if your bios isn't detecting it. I would pull the drive out and check the pins. If memory serves me there should be ONE missing. If it is more than that you will need to replace the drive. You could also try plugging it in on the same cable as the hard drive (make sure you switch it to slave) and see whether or not it is detected. That would rule out the cable.
Good Luck and post your results
Jeremy

Cannot access shared external drive on iMac from Windows 7

Used to be able to access this drive with no problem from any of my PC's. Sent iMac in for repair and system drive was wiped so I'm starting from clean install of Leopard. Did all the updates first including 10.6.4 which wasn't on before the system drive died.
Firewall is off
SMB is on
Everyone as well as main user has read write access to external drive
iMac is in the same workgroup as machine, although it wasn't before and it worked fine.
PC can ping the IP of the iMac and get a response, can see the iMac in list of networked computers
but cannot access anything on it.
Windows 7 network diagnostics says "file and print sharing resource (JMGIMAC) is online but isn't responding to connection attempts" "The remote computer isn't responding to connections on port 445
I've tried everything, any ideas
Josh

I am familiar with the instructions for sharing files and have followed them (several times I might add).
My problem is that the information that I place in the WINS tab ( in the Network Preference Pane) disappears when the iMac is re-started. This information (especially the Workgroup name) must appear when the computer re-boots. It doesn't and I have to re-enter the information in the iMac before I can access its files from a Windows PC.
I have searched the internet for days trying to find an answer to this question. Although the problem seems to be fairly common, no solutions have been found.

Can't print & can't see USB flash drives plugged in from Windows partition

My uncle has installed Windows XP professional through Bootcamp on his new MacBook w/ Snow Leopard. He gets to it through Parallels. Everything works perfectly, except he can't print to the same printer that the Mac prints to, and also, when in Windows, the os won't recognize USB flash drives that are plugged into the MacBook either. He has the latest Windows printer drivers installed for the printer he is trying to print to and still won't work. He needs both of these up and running immediately. I convinced him to get a Mac. Apple fam...HELP!!!
Thanks.
Smartmediaman

Hi,
since Parallels is not an Apple product it would be ebtter to ask such questions in the Parallels support forum.
Nonetheless:
using USB devices: http://kb.parallels.com/en/5161
using Printers: http://kb.parallels.com/en/4990
Regards
Stefan

Help! External hard drives lost formatting from windows!?!!

I have Windows installed on my macbook through bootcamp, and i was trying to get my external hard drives (formatted as HFS+) to connect through macdrive. I have 2 500GB WD firewire drives
anyway in the process windows did something and now my drives seem to be unrecognised in os x. I had disk management up in windows and a popup came up to do with the formatting of the drive (whether it was GUID partition table or Master boot record). I click GPT thinking that's what it was and it won't do anything anyway. Well boy was I wrong.
I don't exactly know what it's done, but now OS X won't recognise the drives and there seems to be a 128MB partition labelled disk2s1 that disk utility recognises. it won't allow me to run disk first aid on it at all. Photo link: http://img.hibalazs.net/uploads/b8a8fbef2d979644.jpg
So what can I do? The data is obviously still there but how can I restore the formatting on the drive so OS X will recognise it? Any help is appreciated.

Managed to fix the problem by finding the partition using TestDisk and then writing the partition map in pdisk. Worked like a charm, followed this guide: http://perrohunter.com/?p=technology/repair-a-mac-os-x-hfs-partition-table

Windows feedback missing from windows 10

Hi, Just noticed that the windows feedback app on windows 10 tech preview has gone missing. Any idea How i can get it back?
Jason

Hi,
Sorry for the delay reply.
But i could search the app in windows store. Like the image below:
Did you mean this feedback app?
Meanwhile, what is the error when you search this app in windows store?
Regards.
Vivian Wang

Transaction Log File Drive is missing from SAN

HI all,, we had some SAN issues and we dont have Transaction Log files for some databases..
This is SQL Server 2008 R2 Cluster.. The drive which was holding this Tlog files were missing.. PLease let me know, how to bring back databases.. Awaiting for early reply..

As others have said, the SAN folks needs to get their act together and bring back disk with the log files.
If the log files are truly lost, you should restore a clean backup. If you don't have a clean backup, well, there are some people in your company that are likely to ask you some questions of what is going on the data centre.
It was suggested that you should detach the data file and reattach it to have a new log file created. I strongly recommend against this. You will get a database that is likely to have corruption and inconsistency on both SQL Server level and application,
due to transactions that were in flight when the log files were lost.
Erland Sommarskog, SQL Server MVP, [email protected]

AMD Radeon HD 7690M Graphic Driver is missing from Device Manager

I have been trying to fix this the last few days after the Driver stopped responding a few times when I play Battlefield 3. But today, for some reason I don't see the Display driver on my Device Manager anymore... And I cant do anything with the Intel Display driver because I dont have the performance I need. Can someone help me??
19. 20th May. Kopite. Belieber. Bambino. Directioner.

Hello JustinDC7,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your display driver on your HP computer. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Tags created in Organizer missing from Window folder details

I am using Photoshop 5 and regularly tagging all input. When I use windows to see the list of what files are in a folder only a few of the tags are listed?
I do not understand.

The tags are not normally written to the files, so they are not normally visible in Windows. The reason for this is that PSE wants you to use tags in the Organizer, not Windows, to find your files.
If you need to have the tags available via Windows, you can select all of your photos in the Organizer and then File->Write Tags and Properties...
Note: this command fails for some types of Raw files.

My driver is missing from windows 7

Similar Messages

Maybe you are looking for