My droidx is stuck in an infinite loop at the start-up

Hello, I turned my droidx on yesterday and it can't get past the red eye. It freezes on the redeye then goes back to displaying "droid" then back to the redeye and it just continues this loop indefinitely. Anyone know how to fix this?
Thanks in advance

droidx is infinaite loop..i held down the home button and the power button and got to the android system recovery screen....at the bottom of the page it reads...E:cant open /cache/recovery/command......so what do i do now?...my options on screen are...wipe data/factory reset....or wipe cache partition.............help!!!!!

Similar Messages

How do I cancel a sub vi stuck in an infinite loop?

Hi,
I am attempting an implementation of the Constrained Nonlinear Optimization sub vi. It works perfectly 99.9% of the time but gets stuck the other .1% of the time. It is supposed to time out when it cannot find a solution, but it is failing to do so. Consequently my VI regularly crashes.
Apparently this is a known issue with this subvi. The NI whitepaper mentions that this is caused by a subvi while loop that can get stuck in an infinite loop. The work around is suggested to be to add a counter to the loop and exit it after a certain number of iterations.
I can find the infinite loop occuring in the subvi. But the sub vi opens as a clone and will not let me edit it. How do I work around that?
Failing that, is there a way from the main vi to cancel the optimization vi after a certain time so that the program can move on?
Suggestions would be appreciated.

Abort the program. Press ctrl+M when you have VI opened as clone. This will open it in edit mode.

Igxprd 32, device driver stuck in an infinite loop

Just attempted to reset a hard drive on our T61 to its factory settings (Windows XP) using the "Recovery CD Set" (rescue and recovery cd, supplemental product recover cd, and 6 product recovery cd's). During the final step, the computer reboots itself; however, Windows can't load. I keep getting an error on a small blue screen, referencing a problem with "igxprd32" and that the device driver got stuck in an infinite loop. How can I fix this issue. (Product ID 6465CT0) Thank you!

Kindly try to boot the system into Safe mode and then uninstall the display driver.
After this you should able too boot the system into normal mode. Download the latest driver from lenovo website
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ld152ww.exe
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My Ipod is stuck in an infinite loop not like the others so far discussed

Today out of the blue my 5th Gen ipod displays the starts making an ominous clicking noise, displays the "sad ipod face" and then starts flashing "battery very low: please wait" then it shuts off the apple icon appears and the whole thing starts over. I've tried to boot it in Disk mode which I managed once right after it happened but I was hesitant to restore because I was at work and would loose all my songs. It then proceeded to freeze and now is stuck back in this infinite loop. I plugged it to two different computers and a car charger and nothing seems to make it charge but it had at least half a charge before it started with this thing. Someone Help Me Please!!!
30gb 5th gen ipod Windows XP Pro

Here is a pretty comprehensive post about the sad iPod icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
The Sad iPod icon.
You can arrange online service here.
Service request.

Help on how to make an infinite loop with the same space on all images

HI:
I made a movie clip with infinite loop in which there are images that move from right to left something simple like a marquee, and each image has a blank space between them, but between last and first image there is a more space, how I can do to make all images have an equal space between each one and that the motion never stops.

Thanks for your time and answers my friend, but I'm still not be able to achieve what I want, I forgot to tell that I'm doing this by layers, let's say, I have 5 images, (in fact I have like 50 images converted to movie clip symbols) each image has it's own layer, layer 1, layer 2, layer 3, layer 4, layer 5, then I put a 200 frame motion tween on all layers at 30 fps, then I arranged layer 1 on the first frame to the frame 200, the second layer from frame 50 to frame 250, third layer from frame 100 to frame 300, fourth layer from frame 150 to frame 350, and fifth layer from frame 200 to frame 400, by this I mean I put a 50 frame of space on each image but if you can see, the last image has a duration from frame 200 to frame 400, and there's nothing on frame 250 where it is supposed to be another image to match the same blank space of all the others, the movie clip restarts on the frame 400, and there's a 150 frames of blank space between the last image and the first image, I put the gotoandplay on the frame 250, but it abruptly restarts the movie.
Is there another way to do this ?
Am I doing something wrong ?
Please I really really need help on this.
Thanks

IPhone 4 factory unlock wont restore. It's stuck in a continuous loop of the apple logo and spinning hash marks.

I just got the factory unlock from AT&T and connected my phone to iTunes as instructed. did the back up and then the factory restore. After I got the "Congratulations" message I followed the steps to restore my phone. (I have tried both registering it and regester later options). The phone is in a continous loop of the Apple logo and the circular hash marks. iTunes starts the restore process and gets to Step 5 (installing the apps, music, etc) and then the phone goes back to the Apple logo and disapears from iTunes.
I had all of the latest updates.
I tried the reset with the power button and the home button and it just does the same thing. The only way I got it to stop was to let the battery run down.
Please help, I am deployed and use my iPhone alot over here.
Thanks

Try a DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer. Hold both Home and Power buttons for exactly 10 seconds, release Power button, keep holding Home button until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding Home button. If the iPhone screen is completely black and iTunes says Recovery Mode, this is actually DFU Mode. This can sometimes be difficult to get, so keep trying to get DFU Mode (Recovery Mode with black screen). Then click the Restore button of iTunes.

MySQL Service first time use: in infinite loop, won't start and can't stop

Log says: "The host 'DOMAIN.COM' could not be looked up with resolveip."
It says that is not a problem just use IP addresses. Included just FYI.
Then: "Installing MySQL system tables...
Installation of system tables failed!"
I suspect this is why I am in an infinte loop.
In setup I chose a Root Password and changed the default database location to be on my second HDD, plus I allowed Network connections.
Now it is in the starting state always, looping with the same error over and over and creating bin files in my chosen DB area. I can't stop it from the GUI (not tried from command line as want to be sure I get right command - help there would be welcome). I can't remove the service as it puts itself right back in there straight away. Rebooting doesn't help as it starts up automatically. Please help!

I am putting up my "solution" as it is for now. After quite a bit of research, I discovered that my problem was caused by my selection of a database location that had a space in the path. I was using the Server Admin GUI and would have hoped that such a tool would know the MySQL can't have spaces in the path and it would have told me not to set it to one that did have space in the path, but it seems not. So once that was discovered I also thought changing the path in the GUI would fix it, but alas, it did not. After quite a bit more research (I learned quite a lot, during this, but there is still a lot more to learn) I worked out that the plist file used by the daemon which starts services had not reflected the changes I had made in the GUI. So after more checking to make sure it was Ok to do so, I edited the file to reflect the database location and PID file location to be the default of /var/mysql. MySQL sprang to life and seemed fine, but unfortunately the GUI was messed up still. So a little more research led me to the serveradmin command that can be used in place of the GUI and I have now been able to turn off the service (I only started it out of curiosity and don't yet need it). So as I say - a kind of "solution" because actually my GUI appears to be broken, but I am able to use my machine again without it looping incessantly.

Trying to turn off two step verification but just stuck in an infinite loop

So, I try to turn two step verification off, I go to manage my ID, to Security and choose Turn off Two Step...so far so good
I am told that I have to choose three security questions, enter my DOB and provide a recovery email, then press Continue...still good
A window pops up asking whether I am sure I want to turn it off, it warns me that I have to choose three questions and I am presented with two buttons, Cancel or Turn Off (That turn off button looks very tempting...so I click it)
...so...I am asked to provide three new questions, my DOB and a recovery email address....
And repeat....and repeat...
I have tried on different browsers...I have tried on two different Macs and on a Windows pc....
Any help?

eh?

Help: Stuck in an infinite loop with firmware update

Need some help here.
I have a 2013 21.5" iMac, running Mac OS X Mavericks 10.9.
Recently, during a firmware update, my kids pulled the cord (they claim innocence). Now, when I boot the machine, it goes to the white firmware update screen, does the full progress bar, and then shuts down.
It doesn't restart itself.
When I power it back on, it does the firmware update again.
How can I fix this? I have access to other Macs, USB keydrives, Firewire cable, etc. Just need to know exactly what to do. Tried searching the web, but didn't find an answer for this situation. I'd rather resolve myself than truck it down to the Apple Store.

You can try this:
Intel-based Macs: Resetting the System Management Controller (SMC)
If that doesn't work, see below.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Stuck in an infinite loop (heh) with Lion recovery

I'm running the Lion Internet recovery to get a fresh install of the OS on one of my systems, but I've hit a snag. Each time I click the "Install" button, I get a dialog box informing me the terms and conditions and Apple privacy policy has changed. It says "Click OK to view," and I do so. Unfortunately, nothing happens at this point. I just see the Lion installer still stalled where it was before. I can click the "Install" button again to be greeted by the same dialog box and click "OK" again, but I can't get further. I moved windows around to see if there is a policy hiding somehwere, but that doesn't appear to be the case. I even thought I might be able to agree to whatever changed if I logged into the Mac App Store on another computer, but I'm not notified of any updated policies when I do this. So, at this point, I'm sitting in front of a Macbook that refuses to let me do a clean Lion install because I can't agree to privacy policy updates it refuses to show me. If it makes any difference, this is an early 2008 white Macbook. What do I do?
UPDATE: I am not using the officially termed "Internet Recovery." I am, in fact, using the Cmd-R method which downloads from the Internet (hence the confusion). Sorry!

It's been deleted. You would need to boot into a Snow Leopard system so you could re-download it from the App Store. If you are able to do this then be sure to quit the installer when the download has finished. Copy the installer to a safe spot on your hard drive. You can make your own bootable DVD or flash drive once you have a copy of the installer: Burning A Lion Boot Disc. Also, see About Lion Recovery.

Stuck in an infinite loop trying to pick paypal (yes I am US)

So basically I have my account and I am trying to confirm a payment method for it. I have picked paypal multiple times (as of now i have 5 "billing agreements" with itunes in my account.) but i tunes will still not realize this and says i have to register a payment method every time i try to download a song. I tried using a credit card today and i got the whole "wrong security code" crap. this is really dumb. Support was of no help either.

eh?

My itouch 3g is stuck in a boot loop. The apple logo shows up for about 3 seconds and then turns off. I can't get it to go into dfu or recovery mode. Please Help!

I don't know what to do.

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

My phone is stuck in a restore loop after the ios7 update. If i select "setup as a new iPhone" will i be able to restore it to the old backup later?

everything updated and works fine in itunes. Slide the hello screen, Pick a language, country and connect to wifi. then it asks to setup phone again. repeat the "restore from itunes backup" which it does and eveything repeats.

Yes, if you choose to set up as a new phone, you will be able to restore from a backup later.
http://support.apple.com/kb/ht1766

My iphone4 is stuck on an endless loop displaying the apple logo after restore setting and "erase all my personnal data" (forgot the word), what to do?

I am from Lebanon so there aren't any apple store nearby and can't download 666,6MB with my poor internet especially since on itunes you can't hold the download or at least when you update,
I just bought the Iphone yesterday from someone and been searching on the net for more than 3 hours
please help

I would first do a SMC and PRAM reset. See this link:
http://www.makeuseof.com/tag/reset-macs-smc-pram/

Facebook and add-on page does not open stuck in a infinet loop

I am able to use other ssl enabled sites like gmail from Firefox, but when I try to login to Facebook after the first page, It does not open. Have tried all the troubleshooting steps suggested for Facebook errors and https errors, no luck.
I get stuck in an infinite loop on the next page. This is the security page which asks to setup a machine name.. (https://www.facebook.com/loginnotify/setup_machine.php?next)
Please note there is no error displayed, the page just loops endlessly and does not display the Box which should ask me to set the device name for Facebook.
The same thing happens when I try the Add -ons page via the Tools menu. I am able to use Facebook in Chrome on the same system system.
Willing to work with the community to resolve this. Can also provide Wire shark dumps if required. Thank you for your time. Hope this gets resolved soon.

Hi Matthew,
Thank you for your question, I am sorry of the challenge as you have been at it for a while. [https://support.mozilla.org/en-US/questions/988977] pazos comment had a particular step to clear the cache after applying the update. I followed the mozilla hacks comments as well and saw you were in a loop after
There was a follow up redit post that was successful from updating to 1.0, then to 1.1 with the update.zip then to 1.2 [http://www.reddit.com/r/FireFoxOS/comments/1xvq2w/how_i_got_12_working_on_zte_open/]
Did these instructions help?

My droidx is stuck in an infinite loop at the start-up

Similar Messages

Maybe you are looking for