My DSL Network constantly needs for me to do the always allow action

The DSL network that I have on my house constantly loose connection to the internet and that requires for me to open the networks preferences an go through the Assist me, Diagnostics process and so on, until I click the "always allow" button. After I do this, access to the internet is restored.
Does anyone have any suggestions?
Thanks in advance!!

Is the problem wireless? Or is the problem the DSL connection, sync or authentication?
You will need to give us more info..
How is the DSL network different to the TC 2nd gen.. ??
Do you run multiple networks? What modem do you have? Is it running in bridge or router mode?
How is the TC connected and is it part of the network.. is so what part?? Router, wireless AP, switch etc.. the more info you give us the more we can help.
Log from the DSL modem is invaluable if you are having dsl issues.. please post any issues from that..
For pure wireless issues.. this is usually a good time to do a clean out.. open the wireless in network preferences.. go to the list of all the remembered wireless.. and clear out the whole lot. Reboot the computer, rediscover the wireless and make sure you remember the network.

Similar Messages

Could not find network adapter needed for registration

Cisco IP Communicator has worked well for a month now. One morning I go to launch the app and I get the error message: Could not find network adapter needed for registration. I rebooted my pc and I got the same result. I reinstalled the app and got the same results. I don't know what if anything changed, but I know I can't even get the application to load to look at any settings. PLEASE HELP!!!
Brian C

Hi Brian,
Have a look at this good thread :)
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc0bb6f
Hope this helps!
Rob

Setup needed for ACH payments to the Employee and Supplier

Hi,
I am looking for a document to know the setup steps needed for ACH payment to the Employees and the Suppliers. Can anybody give me a detailed document on that or let me know where I will find one?
Thanks,
Arun
Edited by: 834011 on Feb 4, 2011 3:55 PM

hi
I am working on 11i to R12 upgrade project.
All I have is SQL and flatfile from 11.5.10 instance..I need to implement ACH in R12...
How this flatfile is created in R12
Do I need to create a Etext RTF template in R12? My bank is wellsfargo
I need to create and implement ACH/credit/debit format in R12 environment.
whate are the steps to create a bank accepting flat file in R12
Can you please tell me how should create the flat file in r12? Should i create etext template or
XML RTF template..
appreciate your reply
kp

Better provisioning in Windows client: Remember templates for the Start Screen - like the need for categorization (taxonomy) in the Start Menu

Better provisioning in Windows client: Remember templates for the Start Screen - like the need for categorization (taxonomy) in the Start Menu ...
Like my previous suggestion about categories alike Linux to clean up the mess in the start menu:
Please help new users to use the Start Screen in valuable way - demonstrate the value.
You don't sell SharePoint with a completely unorded randomized site hierarchy - and without any templates.
Not content - but abstract content like templates are everything when you need to learn to use ... i.e. a new product like the Start Screen. It gets you started right away. A like Word as well.
Please bring order and form to the content. I.e. T E M P L A T E S parsing the layout of the tiles.
Have context switching for virtualization working with the virtual desktop mode. So I only see those tiles that are in context with my actual workflow.
Of course you would need a well-made taxonomy for apps - i.e. subclassed.

Hello cor-el,
Thanks for your help. The View > Zoom didn't work the first time, but I just tried it again on a couple of web pages and it works great!!
Thanks again. Have a Great Day! You sure improved my attitude!
You RocK!!!
Best regards,
Gael

Programming and Network Information Needs for my Wireless Network

I am looking for a solution to two objectives for my router (currently the airport extreme within my time capsule):
1. Is there software that, in plan english, will give me a list of the computers and devices that are on using my router and that will provide me with a list of websites visited? Most of what I can find is highly technical in the information.
2. I'd like to simply shut down the wireless from time to time in our house and currently the only approach I can think of is to unplug the ethernet cable that connects the time capsule to my cable modem. Is there a software program that provides a simple on/off button or, even better, that can shut the thing off for preprogramed periods of time? Freedom is a great program for individual computers in this way, and I am looking for something that works for the entire router.
Thanks!

Gibson123, Welcome to the discussion area!
You really need to get a router which has these capabilities instead of using the AirPort Extreme base station (AEBS).

Advice needed for changing code within the Web IC...

Hi,
I need to change some code within the GET_QUERY_RESULT Method, which is found:
BSP->Z_CRM_IC
View->AuiSearch
Controller class ZL_CRM_IC_AuiSearch_impl
Method do_handle_event
Method eh_onsearch
Method get_query_result
At present the method get_query_result belongs to class CL_CRM_AUI_QUERY_SERVICE.
I can create a subclass from this and call it ZL_CRM_AUI_QUERY_SERVIC, then redefine the method get_query_class, and then make the appropriate changes. But that may be all uneccessary. What I don't know is how to ensure this modified code can be called.
I have already made changes for method DO_INIT_CONTEXT, hence the reason the controller class ZL_CRM_IC_AUISEARCH_IMPL is identified. But this was simple because the view linked directly to this whereas you can see the code I need to change is further down in process chain.
I know that method get_query_result calls a number of BADI's, but these BADI's are too low for the information that I need and therfore really need to make my code changes in the get_query_result method.
I have been reading as much as I can on this subject, but without much success and therefore really count on experienced developers like yourselves to steer me in the right direction, or give advice.
Jas

I will not suggest to put your Enhancements into CL_CRM_AUI_QUERY_SERVICE.
Rather in Component BT -> Class CL_CRM_BTIL . AUi Query Service will Internally call the BOL Component ( get query result )
In your Framework Profile Config , you specify the Component Set . Ex: ALL
Component set have a List of Component Ex BP , BT .
SPRO-> CRM -> CRM Cross Application Components -> Generic Interaction layer -> Basic Settings
Now you can have your Custom , Component Set ( Ex : ZALL ) and Component ( ( Ex ; ZBT , Totally advisable for CIC Development Framework )
Have BT Copied into ZBT and Specify ZL_CRM_BTIL ( Inherited from CL_CRM_BTIL )
And in your Custom Component Set , Specify ZBT instead of BT .
Now Specify your Custom Component Set in your Framework Profile .
Now you got the Enhancement Spot in ZL_CRM_BTIL->GET_QUERY_RESULT
Let me know if it make sense

Javascript needed for multiple lines of the same calculations: price x quantity = total

I have received some help already but I need more details - like exactly where to place the code - and - do I place the code before using "Place Multiple Fields? Also, does the first Total1.0 field need any calculation in it or does the area under the "Calculate" tab need to be blank?
The fields in the example below were placed using "Place Multiple Fields". Instead of going into the Total fields one at a time and telling it to pick up the correct field names for Price and Qty for that row, I'd love a formula that was able to figure out the totals for each row. The only thing is that when you use "Place Multiple Fields" the field names change (e.g. Price1.0, Price1.1, Price1.2, etc.)
I really need this spelled out step by step for me, if someone has time time.
Thank you x 1,000,000.

With Hierarchical field names one can create an array of the lower field objects below a one of the levels in the hierarchy.
// Custom JavaSCript for the subtotal field;
var oHFieldTotal = this.getField("Total1");
var aHFieldTotal = oHField.getArray(); // Total field objects in an array;
var aHFieldPrice = this.getField("Price1").getArray(); // Price field objects in an array;
var aHFieldQty = this.getField("Qty1").getArray(); // Qty field objects in an array;
var nSum = 0; // sum of extended price * qty;
// process each row of fields;
for(i = 0; i < aHField.length; i++) {
aHFieldTotal[i].value = aHFieldPrice[i].value * aHFieldQty[i].value; // compute the extended value;
nSum += aHFieldTotal[i].value; // add the extended value to the running sum;
} // end for loop;
event.value = nSum; // set the field value to the running sum;

Why there's no Need for Speed game in the apple store?

Hi, I really wanna have Need For Speed game for my macpro, I only found it through my ipad but not from mac, can you help me for that? Thank you

Google, "Need For Speed on a mac" and find the links.

How To needed for zooming and KEEPING the new close-up format

Hey folks, I have searched but perhaps I am not using the right key words because I cannot get the answer.
I filmed and imported a clip which has the subjects too far away so I worked out how to use the wireframe (thanks for that- I got that much from here) to zoom in and reposition the edited clip.
BUT- when I export it it is back to how it was- with too much wasted space around it.
What do I need to do to KEEP the zoomed in look?
Thank you for reading.

Thank you Ian, it could well be. Changes only "stick" in the Viewer window, eh? I have looked and the slider in Motion is set to 140 so I assume that is percent. Am exporting as I type. Thank you very much.
For those looking to scale/zoom in to crop the picture (edges):
Select Image+Wireframe so that a white cross (from corner to corner) appears over your clip in Canvas (thank you Tom Wolsky) and then drag its corners in which ever way you would like- making the clip zoom in or out depending on your need. You can also move it around to recenter it if you wish.
PS: I did this in the Viewer (and NOT the Canvas one) and it WORKED fine. However I am told that this is to be done in the one entitled Canvas.
Message was edited by: MacBraveheart

Approximate time needed for normal shutdown of the instance

how to figure out how much time needed to stop the oracle instance?
do the oracle "shutdown immediate" in case when OS is shutting down or "shutdown normal"?
What will be the result if there are still long-running transactions when OS shutdown initiated?

Anton Kharus wrote:
how to figure out how much time needed to stop the oracle instance?
By measuring the shutdown timings from time to time.
do the oracle "shutdown immediate" in case when OS is shutting down or "shutdown normal"?
What will be the result if there are still long-running transactions when OS shutdown initiated?
Oracle is only shutdown at a system shutdown if you configure shutdown scripts to do so.
Depending on the OS you have these scripts must be placed somewhere in /etc/rc?.d or /sbin/rc?.d
It is ofcourse depending on the shutdown type, and the amount of running session.
Shutdown normal will wait until all users have disconnected
Shutdown immediate will wait until all users have ended their running statement
Shutdown transactional will wit for users to and an active transaction
Shutdown abort will not wait, but leave the database in a to-be recovered state.
Shutdown abort should only be used in case all other shutdown commands do not work, or there has been some kind of error leaving some database processes running.
HTH,
FJFranken
My Blog: http://managingoracle.blogspot.com

Need for SQL to fetch the details of Business Partner table (OCRD)

Hi,
I am trying to write a sql that would help me to get all vendors and their Tax ID information. Here is what I wrote...
select CardName, LicTradNum, Address, City, State1, Country, ZipCode, Phone1, Fax, CntctPrsn, Box1099, CreateDate, UpdateDate, * from OCRD where CardType = 'S'
In the SAP B1 client I am able to see valid values for fields '1099 Form' and '1099 Box'. When I execute above SQL, I only get a reference to the actual values. I am thinking there is a cross reference to other table to pull this informaiton. Can you help me to get the details for 1099.
Thanks a lot in advance for your help.
Manoj.

Hi Manoj,
Try:
select CardName, LicTradNum, Address, City, State1, Country, ZipCode, Phone1, Fax, CntctPrsn, T1.Form1099, Box1099, CreateDate, UpdateDate from OCRD T0
LEFT JOIN OTNN T1 ON T1.FormCode=T0.FormCode
where CardType = 'S'
Thanks,
Gordon

Need for speed runing on the pre is this real palm????

http://www.youtube.com/watch?v=hCVnxXvEAPo
Post relates to: Palm m100

Yes, it is a real video playing!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I have 5 computers authorized,i no longer have three of them-now i have purchased a new computer and i am unable to authorize it,for it still shows the maximum allowed.how can i resolve this?

i would like to know how i can authorize my computer,for it shows thatr i already have the maximum of 5 allowed.
the problem is,that three of the previously authorized computer have been sold.please advise

Login to iTunes, go to "view your account info" on the itunes store, deauhtorise all five, and then re-authorize your current Computers one at a time.
Authorise / Deaurhorise About
http://support.apple.com/kb/HT1420

I need free network analyzer software for my mac. we are trying to monitor what software may be running which is causing our internet to fail, although the internet is still coming into our modem.what is recommended?

My internet keeps 'tripping' at or around the same period time each day. We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause. Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn. Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac. He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?

Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA.

Constantly needing to reset Airport Extreme

Hi! I have an Airport Extreme network set up in my office with an Airport Express acting as an extension. The Airport Express works for a day or so and then flashes amber the next day. I constantly need to unplug and plugin the Airport Express for it to work. If anyone has any tips, that would be great!

Seems to be the firmware update. This board is full of complaints. Hopefully, someone at Apple is working on a fix. It worked fine before this dumb update.

My DSL Network constantly needs for me to do the always allow action

Similar Messages

Maybe you are looking for