My Dual 1.8 G5 too slow on color performances
I send my FCP project to color but unfortunately my dual 1.8 with 3.5 ram, nvidia 6600 open gl won't perform at its best. I know for color application XT1900 is recommended but please the base recommended specs showed that i did have the baseline requirements.
Any idea how to get my dual 1.8 go a little bit faster. adding more ram or what? Tried to put color FX into 20 secs clip takes 30 to 1 mins. Wow its way too slow though. Try to play the clip also takes more secs to mins to runs. I'm wondering why this happen and it should can go just a bit faster. Any help/advice much appreciated
Oh ya i knew it. I owned this PMG5 since it first released and planning to buy the best and good one but not affordable. I love this machine but future technology is highly in demand. I just updated the graphic card from its original to the latest i have and pretty much can go to started the color app but way to far to execute a full project. Eager to buy the Mac Pro but have wait though. huh huh!
Runs benchmark for nvidia GeFOrce 6600 and scored at 5326 - 400FPS. Not that i know, just did some test and open few applications simultoneously with color but got frustrated because its hang for a mins to runs on every apps.
Thank you for your opinion and obviously my machine is going to obsolete in the near future. It can go for small graphic applications and final cut pro but FCP seems to slow either, render clips for 1 - 2 mins with transitions and fx would go for 30 mins to 40 mins. Harghhhh! i must get the new one!
Similar Messages
-
Does dual-core iPad 2 mean the next update will make iPad 1 too slow?
Having rendered my old iPhone 3G useless by updating it to iOS4, I'm really wondering if one of the next few updates to iOS will render my iPad 1 too slow to use.
One of the most appealing things about the iPad is how quick and snappy it is to respond. If that slows down it will ruin the user experience.
Spending $499 on a new iPad every April is also not sustainable -- and will not happen.
I encourage Apple to make dam sure the iPad is not obsolete in the wake of two A5 processors on iPad 2."There is more RAM and developers will take advantage of that, but that will just make their apps run faster on the iPad 2, but not any slower on ours."
That will make existing apps run faster on iPad 2. But those apps get updated, become more complex to take advantage of the extra ram and cpu, and then you have an updated app that runs about half as fast as it used to before you just upgraded it.
I know, you can't stop progress. But geez, I finally bought a case for this one in December!
Also, FWIW, the iPhone 4 has 512MB ram whereas iPad1 has only 256. I'm betting in two months if you don't have 512MBs RAM on whatever device you're using, it's gonna be slower than you were used to.
I guess it makes sense... At this point speed is becoming irrelevant on PCs. They're all fast enough. So the speed race moves to the mobile market to keep us buying every year. My 1.6GHz Core2Duo Dell laptop is plenty fast and it's about 5 years old. Same with the 2Ghz Core2Duo iMac. Now, the dual-core G5 I'm typing this on is having major speed issues -- for the same reason I'm discussing the iPad. When my G5 came out we were on Adobe CS2. Now it's CS5, and I'm only on CS4 -- but it's designed for the latest greatest hardware. My computer's not any slower, but my Photoshop sure as heck is. And same with everything else that's been updated over the last 5 years. And I can't even run the latest Safari. Dam IT dept! Give me a new Mac! -
"Core Audio Error Disk Too Slow" On Stage?
i use logic pro on my macbook pro(2gb ram 2,16ghz) and i'm completely satisfied with this combination.
Only when i'm playing live(electro music - loud environment - lots of sub/bass etc.) i sometimes get the message disk too slow/system overload, although i'm only playing some aiff files and some softsynths to it...
is it possible that my external disk(lacie d2 FW400) is skipping due to vibrations or is my Sudden Motion Sensor stepping in? i disabled it already... anyone the same problems or even an answer
thx in advance...
Macbook Pro Mac OS X (10.4.9) 2 gb RamIf you can afford it buy one of these http://www.sonnettech.com/product/temposataexpress34.html
and an external sata drive - sonett also make them http://www.sonnettech.com/product/fusion.html
Or any external sata drive will work if you only need the one drive. The sonett is good as it does port multiplying meaning you can have up to 10 drives running on your laptop
Although a quicker and cheaper fix could be to try putting the lacie on some neoprene. - this will cut out "most of the" bass thats transferring from say the stage to the drive, but it wont help if the bass is really loud as it is more than likely the airborne bass that is causing the errors.
If money is no object the sonnet solution is very good and in theory would be rock solid running in raid and mounted on neoprene.
Just a thought....
G5 DUAL 2.7GHZ 4 GIG RAM and G5 DUAL 2.5GHZ running as node, macbook pro 2.33 3 gig ram Mac OS X (10.4.9) Yamaha DM2000 -
Hello all,
I have been using Logic Pro for the last five years on my system with no problems and all of a sudden, now I can't record a single audio track without a "Disk Too Slow" problem. Literally, the project can have only one track and it will still give me an error.
My System:
PowerMac Dual G5 2.5GHz w/ 3GB RAM
Mac OSX 10.4.11
160 GB Hard Drive (provided by Apple) - 58.9 GB left - Logic installed here
250 GB Hard Drive - 130 GB left - recording done on here
M-Audio Project Mix I/O
For years I have been recording with Logic and I've never had this problem. I haven't done anything new, haven't installed anything new, or anything like that and just now I've been having these problems. I'm a DJ and audio recording constantly for upwards of 90 minutes straight is vital.
Here's what I've done:
* Tried changing buffer settings (set from 128 --> 512)
* Tried making sure no other applications are running
* Tried emptying trash
* Tried turning off Airport
Nothing seems to work. Any ideas?Hi there,
Sorry to read you are having troubles with this.
I have had the same troubles since Tuesday. All of a sudden I started getting Beach Balls and "Disc too slow". A few occasions I had a message saying that my "midi port was not found" on my MOTU.
Here what I spent the last couple of days doing.... I am sure you have tried them all but maybe something here may help
With some kind help from a forum regular, I reset my MOTU interface to factory settings. I repaired my permissions on my system drive.
I ran a "check disc" for my external audio drive, it past every time, but I repaired it any way.
I took my drive out of the firewire case to check the connections because it seemed it could be a power issue, tried it in another case. (I put the drive together so I felt comfortable doing this)
I also removed a plug in that I had added IK CSR reverb, I had installed it the day my system started giving me "disc too slow" messages.
I also removed all of my TRacks plugins from sessions, they are resource hogs and may have not been helping.
I also trashed my logic preferences.
Things at the moment are looking better.
If my problem still exists it may be in my case the drive being on its way out. It is only a year and a half old, and dose pass disc utility tests every time.
So I am thinking that I may have been mixing out my machine with plugs then having to do hard re-boots not helping things.
Sorry to hijack things, just hoping that we can maybe find a common cause, and solution,
Good luck,
Jay -
"Disk too slow or System Overload"
So while I'm doing rather simple things like recording vox or even playback, the audio stops and I get the message:
"Disk is too slow or System Overload.
(-10010)
The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time."
I'm running on Intel Dual Core i5 2.3's, 4 gigs of RAM with about 230 gigs of free space. I have turned the SMS already to it can't be that. Does anyone know what the problem could be?CosmicChild wrote:
Thanks for the reply. Mind if I ...probe... you for some more info?
Too many CPU intensive VI- what is VI?
HDDs- what is that?
thanks you!
VI = Virtual Instruments. Logic software instruments or third party software instruments.
HDD = Hard Disk Drive
pancenter- -
Lightroom 2.4 Is Too Slow To Use As A Professional Product
Hello -
I would like to know how to get Lightroom to respond in less than 4-8 seconds for almost any task.
From returning to Grid mode (4.5 seconds) to adjusting a routine crop and angle (5-7 seconds per move, 60-90 seconds total) to simply shift-selecting three to fifty photos (4-9 seconds) no matter what I do in Lightroom, it is worse that Photoshop 1.0 on a Mac Plus. Really.
Returning to Lightroom from another app - 7 seconds.
Getting the menus to drop down - 4 seconds.
My lightroom settings:
standard preview size: 1680
Quality: High
Discard 1:1: Never
write changes to XMP: off
Catalog: 127 mb on F drive (24 gig free)
Catalog: 13.5k photos, 95 gig on F drive
Cache: 6 gig on F drive
NVIDIA settings: performance over quality
My computer:
HP 8730 elitebook
4 gig ram
XP Pro, SP2
Proc: Core 2 Duo T9400, 2666 MHz (10 x 267)
DirectX 4.09.00.0904 (DirectX 9.0c)
Chipset: Cantiga PM45
Video: NVIDIA Quadro FX 3700M (1024 MB)
(2x) 250 gig 7200 rmp HD
Before anyone says to export to a new catalog and re-import, etc, use a smaller catalog, etc, be advised that I have done all of that. I have imported only 250 images to a new catalog, on a newly installed OS, with Lightroom as the ONLY application. Still it acts this sluggish.
I have scoured the boards for solutions, and having tried all the varied fixes to no avail, I really quite strongly feel that a person should not EVER be in the position or running some of the most powerful available hardware and STILL have to wait interminable seconds for Lightroom to respond.
This software, as it stands now on the PC platform (unless I am missing something quite obvous) is absolutely unusable in its present state.
Can someone from Adobe or a board guru please respond in kind to my request for help?Photo_op8 wrote:
BradKaye wrote:
I'd have to agree with the subject of this 100%, even though I'm not experiencing anywhere near the levels of lag ellsworth is on any of my primary workhorses.
1st-Gen 17" MacBook Pro 2.4Ghz Intel Core 2 Duo with Hi-Rez Screen (about 2 years old)
1st-Gen MacPro (Dual Twin-Core 3Ghz, 3x, 10k-RPM 150GB Raptor RAID-0, partitioned to System/Scratch/Files (in that order) 16GB RAM...blah blah (about 2.2 years old)
3 week old MacPro 2x2.66 Quad-Core MacPro, 16GB RAM, Multiple Partitioned (System/Scratch/Files) Internal 4x-1.5TB RAID-0, 4x 1.5TB eSATA RAID-0, 2x NVIDIA GT 120's, 30" NEC 3090WQXi, 26" LaCie 526, 24" Apple LED Display
OS 10.5.8 on all machines.
Let me repeat-
Partitioning ONE drive to contain system files, application, cache, catalog and photos=SLOW.
It really doesn't matter that the drive is 7200 or 10k rpm if ALL items reside on the same drive. The MacPro has four bays. One drive for system and catalog, second for cache, third for photos=FAST.
Wow, I'm glad you repeated that, and used capitalized text so that I would be sure to understand.
Clearly, the benchmarks I have off of the various evolutions of my last 3, $10k computers must be in error. (single system disk, RAID-0 system disk, 10k RPM system disk, RAID-0 3x -10K rpm system disks, multiple scratch volumes on different drives, singular scratch volumes on RAIDed drives, tested via benchmark programs and application specific batch tests, etc.etc.)
More importantly as an issue of forum protocol, you didn't actually read my post.
Brad Kaye wrote:
I partition about 10% of the outside of a drive as separate and put the information I need to get to most quickly which tends to be the system folder then scratch disk in a another separate partition and then I leave the rest on that drive as gobs of 'B' space for media and other crap files, reserving the first 10%-30% of the outside of a different drive (or RAID-0 sets) for my files and Lightroom catalogs.
I'm throwing 370 mb/sec between two individual sets of 4 drive RAID-0 sets. Single 7200rpm drives sling about 80 mb/sec. My drive arrangement isn't the reason Lightroom IS TOO SLOW TO USE AS A PROFESSIONAL PRODUCT.
Also, since I referenced and linked the former software engineer turned photo FREAK in my post, whose blog I started reading last year corroborating the decisions I've made in my previous system setups with immaculate documentation and testing procedure your response even more seems like the entire reason I rarely bother posting in community forums. You seem to be here to spout, not to contribute and learn.
Take a look at all of the info contained here: (I've already read it, all of it, and more)
Diglloyd Mac Performance Guide
and if you still think I'm wrong, lets have an informed debate about it. Really.
Otherwise, lets please keep this topic moving forward with the issues Adobe needs to address next to make Lightroom a better product for professional photographers, and specifically, help out ellsworth999 who started this topic, who seems to have a big helping of problems on his plate. I can't speak to him directly of his problems since I'm not using the Windows version of the software. -
Aperture - Too slow to be really efficient?
I have been thinking about whether Aperture might be a way to go for me as far as working with my photographs. The ads etc. seemed like it offered some great features and I don't like the Nikon software that has come with my cameras. iPhoto is OK for my family snapshots, but I want more capabilities for my more serious stuff.
So I when i got an email mentioning the 30 day trial I figured that was a great opportunity to check it out. I was hoping I'd be pleased enough over that 30 days that spending the $300 dollars to buy it would be justified despite the fact that I have Photoshop CS2 and a few other way to organize my photos. Thus far $300 seemed way too steep simply to duplicate capabilities I already have and doesn't come close to offering the capabilities of a full blown image editing app like PS.
So my question is this. Is this thing really supposed to be as slow as it is? The app is running so slow on my Mac G5 dual 2.5 with Radeon 9600 with 2gb of Apple installed RAM that I can't see suffering through using it long enough to even see if it does some of the things I hope it does. I certainly couldn't see using it rountinely as an app for PRODUCTIVITY. There's nothing productive about an app that takes a good 5 seconds merely to remove a master from the library. Even clicking on an image to look at it takes way too long as the preview refines it's resolution.
I did a quick search on this issue and saw lots of stuff out there. I have waded through some of it and some of it is enlightening and some just adds to the confusion. Apparently there may be an issue when running dual monitors. Am I understanding that correctly? Seems to me that most Pros and heavy duty amateurs run 2 monitors (and for good reason - most of the apps these days need to screens to display all the neccessary palattes etc.) So if 2 displays hurt performance, I can't see how this is an app that is going to work for me. I certainly don't want to go reconfiguring my Mac simply to go through the latest batch of pics. It also seems to me that a large library could also be an issue - while I don't have huge numbers of images, I do have a couple of thousand that I keep active on my machine (and a ton more on backup DVD).
So anyway, I'd like to hear from people with a similar setup to mine . . . from your experience is trying to use this app on such a system (which is by no means a slow and incapable Mac at all - I push heavy pixels doing HD work in After Effects and Final Cut all day long and never feel like the apps are too slow to even use)? I am not going to run out and buy a new system simply to run Aperture since. Even if all the bells and whistles are what they seem, they aren't enough to justify it. I also don't want to waste any time using this trial version and learning it's ins and outs if going In know the app won't run efficiently enough.
So am I crazy? Is this thing really as slow as it seems? Are there really as many speed issues as a search of the forum reveals? Is there something I am missing?So am I crazy?
I have no such evidence.
Well, give it time.
In my personal experience, for all practical purposes
it's unusable on my configuration. A Mac user since
1986, I purchased my Mac Pro configured specifically
for Aperture, including an upgraded video card. The
outcome has been underwhelming.
As I can't buy a faster computer, I can only assume
Aperture is suited to hardware yet to be released.
Aperture is the lowest point in my experience as a
Mac user.
I am actually hearing that sentiment more than I would like to as I ask around. Too bad. On the surface it looks quite good. I findit odd that the company that has taken on such great things as it has in the video world can't make this a more efficient piece of software. Perhaps they see much bigger money in the volume that comes from focusing on phones with video and computers for your TV and thus don't really care about an app like Aperature which would really just appeal to dedicated photographers at it's current pricing and probably doesn't rpresent enough revenue - even amongst photogs with cash to burn.
I'm evaluating Aperture (which I have purchased at
full retail price) alongside the beta of another
professional photo app which is yet to be released.
The jury is still out, but growing restless.
Yeah, I have played with the Beta from one of the "Others". It was interesting. It was a while ago and that version didn't seem as potentially "robust" as aperture did. But I think it may be time to go back and take another look. -
Since upgrading to 4.1 LR has become too slow to use.
The problem lies primarily, but not restricted to, the noise reduction sliders. The luminance slider specifically.
Unless I can fix something I will have to return to an older version, Im actually thinking of going back to 3.6 which worked fine on my machine - AMD E2, Dual Core graphics, 4gm RAM.
Please help.The queries are the same across all three database platforms and have been examined by our dba's and run through SQL Server optimizer to get the access path. All queries are very simple...the system was originally written in Btrieve. It is "record at a time" in nature. The program that does the screen refresh does three seperate queries...all something like, select * from tablename where key = 'abc'. The program then combines the data into a single record and returns the results. Like I said...SQL Server 1 second. Each of the three tables has 30,000 records, all with unique keys. The data returned to the application is probably 50 records, each 200 bytes...all character data. All tests were done with the same workstation on the same LAN....I don't think LAN latency is the problem here. Using other query tools, the response back is good, as expected.
Another example...at application startup, we load all of the metadata (columns, primary key segments and index segments) into memory using the standard odbc api calls...SQLColumns, SQLPrimaryKeys and SQLStatistics. SQL Server loads this in maybe 8-10 seconds while Oracle loads in 15 minutes at best. These queries we don't control and it is still unbelievably slow. Again, using the ODBCTEST utility, the results for these api's come back pretty quick.
If it is our application causing the problem in some way then it should be equally slow across all platforms, right?
By the way, we had one of your Oracle Consultants in house trying to solve the metadata problem and he was unable to find any problem in our application and had no answers for us.
Thanks for the quick response.
Lon Diehl -
Disk is too slow or System Overloaded ERROR
I have logic studio and a macbook pro and keep getting the following error message: Logic Pro: Disk is too slow or System Overloaded (-10010) Not sure how to fix it. Any suggestions?
It's a bug in logic. It's been there since multicore CPUs came out.
Try putting your fx on a bus/aux rather than on the same track as the instrument.
That way it will trick logic into using a different core for the different tracks.
I've seen this problem on dual quad core CPU mac pros, so it has nothing to do with your CPU performance.
Also if your recording to the internal harddrive whilst playing back audio from it you might run into problems when using bfd2 or addictive drums or any other large sample library type plugin.
In my MacBook pro I took the DVD drive out and put in an SSD for the OS in its place.
I then use the internal mechanical drive for recording and samples etc.
This solved all my issues and made everything so much snappier.
It's dead easy to do too. Infact it works so well I'm thinking about getting a standard MacBook pro (so I can do the same thing again) instead of the retina one.
I'd refuse to buy a retina one until I have seen logic play back 1 instance of bfd2 a few audio files whilst at the same time recording a guitar through amplitube 3. I'm not paying £2000 if it can't do that. (you'll be surprised)
Like I said my old one couldn't do it due to the overloads you mention until I did the DVD drive swap trick.
The retina looks good but, 1/4" thinner is one thing, but having to carry leads and adapters for everything it kind of defeats the purpose!
I would need a thunderbolt to FireWire adapter (which aren't out yet) a FireWire 800 lead and a FireWire 800 to 400 adapter jut to plug my apogee duet soundcard in! ***?
I'd buy a thunderbolt audio interface but their are no mobile ones. The only ones that are out are large ones for the studio (And mac pros don't even have thunderbolt)
It makes no sense, no sense at all!
You couldn't make it up. At least they have dropped the dongle from logic so I can plug my mouse in.
Emagic should release a pc version again. These quarterly decade updates are getting boring!
Where's logic X? -
Disk is too slow. (record) (-10004)
I get Disk is too slow. (record) (-10004) everytime I want to record (vocals) no more than 30 second into it.
I realised that It happens more often when I need a small I/O Buffer Size and not at all when higher. So I started playing around with all those parameter and the Larger Disk Buffer
Small I/O Buffer Size(for recording without delay) works best with the Larger Disk Buffer On (ticked)
Playing back busy mixes with many pluings work better without the Larger Disk Buffer On and the I/O Buffer Size High (1024)
So, my question is... Is this normal procedure or I am just dogging a fundamental problem in Logic?
Feel free to comment/advice/question/etc...
G5-Dual 2.5 Mac OS X (10.3.9) Logic Pro 7.1.1 Edirol FA-101 Firewire 1.5G RAM
G5-Dual 2.5 Mac OS X (10.3.9) Logic Pro 7.1.1 Edirol FA-101 Firewire 1.5G RAMdid you defrag your disk ?
How full is it ?
I could record 54 tracks on my Motu PCI system on a G4 533 MP -
hey everyone, im very new to Logic and overall computer based recording. i have a Tascam FW-1804 interface that im using as well as Logic Express 7. im sure this message 'disc too slow error' is fairly common, but what should i do to get rid of this problem? should i get an external hard drive? what settings should i modify to make the program run more smoothly? thanks a lot for any help or advice, i greatly appreciate it.
You definitely need an external hard drive if you aren't already using one. The internal hard drive is already too busy running system processes, and running those plus a logic project is too much work. So you should run logic projects from an external drive that only has that one inparticular job of running the logic project. Also make sure the external drive is AT LEAST 7200rpm if not higher. Also give yourself some headroom and buy like a 500gb external. In my experience, a hard drive performs best when it is less than 50% full, so that's why you should always go a little bit bigger than what you need.
Lastly, you should check out some external firewire RAID striped 0 solutions. This means that there are 2 physical drives that are hooked together in a way that the computer treats it as 1 logical drive. The advantage of this is that the data is split evenly between the two drives and there will be less strain on the drives. Kind of a similar concept as dual core processing in a sense.
The only disadvantage of this is that if 1 out of the 2 drives fail, it's pretty **** hard, if not impossible to get your data back.
What I do is record everything with my RAID because it is a lot faster, and then every once in a while will backup everything to another standard external hard drive.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/
Check out the selection there. I've got the 500GB RAID and a 200gb standard. I have never had issues with them and I highly recommend them. -
Application running too slow on sun T5440 but run normal on sun M3000
Hi all,
I have application running on sun server T5440 4x8x1.4 GHz, 64 GB RAM, application running very slow though load average too low. when I install my application on another server SUN M3000 (One CPU 1x8x2.5GHz, 8GB RAM), application run smoothly.
Here is my server T5440 info:
Code:
bash-3.00# uname -a
SunOS 5.10 Generic_142909-17 sun4v sparc SUNW,T5440
Psrinfo -pv
Code:
bash-3.00# psrinfo -pv
The physical processor has 64 virtual processors (0-63)
UltraSPARC-T2+ (chipid 0, clock 1414 MHz)
The physical processor has 64 virtual processors (64-127)
UltraSPARC-T2+ (chipid 1, clock 1414 MHz)
The physical processor has 64 virtual processors (128-191)
UltraSPARC-T2+ (chipid 2, clock 1414 MHz)
The physical processor has 64 virtual processors (192-255)
UltraSPARC-T2+ (chipid 3, clock 1414 MHz)
/etc/system
Code:
set semsys:seminfo_semopm=10000
set semsys:seminfo_semmsl=10000
set semsys:seminfo_semmni=1024
set max_nprocs=50000
set msgsys:msginfo_msgmnb=2097152
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set shmsys:shminfo_shmmax=1073741824
set shmsys:shminfo_shmmni=1000
set rlim_fd_cur=10000
Ipcs
Code:
bash-3.00# ipcs -a
IPC status from as of Wed Jun 13 12:31:01 ICT 2012
T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME
Message Queues:
q 62 0x1388 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 61 0x1387 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 60 0x1318 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:22
q 59 0x12a9 --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9071 10:25:38 10:25:38 8:36:22
q 58 0x100f --rw-rw-rw- topx topx topx topx 0 0 2097152 9069 9070 10:06:16 10:06:16 8:36:22
q 57 0xfa0 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 9071 9069 10:25:38 10:25:38 8:36:22
q 56 0xf30 --rw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:36:20
q 55 0xc27 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 0 0 no-entry no-entry 8:28:14
q 54 0xbb8 -Rrw-rw-rw- topx topx topx topx 0 0 2097152 172 9066 10:47:08 10:47:08 8:28:14
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 104 0x9c4 --ra-ra-ra- topx topx topx topx 3 12:31:00 8:36:20
s 103 0xa8c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 102 0xd48 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 101 0xce4 --ra-ra-ra- topx topx topx topx 1 8:36:20 8:36:20
s 100 0x26de --ra-ra-ra- topx topx topx topx 8 10:19:34 8:28:14
s 99 0xc1c --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 98 0xbb8 --ra-ra-ra- topx topx topx topx 1 8:43:50 8:28:14
s 97 0xaf0 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 96 0xa28 --ra-ra-ra- topx topx topx topx 500 8:36:20 8:28:14
s 95 0x7ee --ra-ra-ra- topx topx topx topx 1 8:36:20 8:28:14
s 94 0x7e4 --ra-ra-ra- topx topx topx topx 1001 8:36:20 8:28:14
s 93 0x7da --ra-ra-ra- topx topx topx topx 220 8:36:20 8:28:14
s 92 0x7d5 --ra-ra-ra- topx topx topx topx 200 12:05:15 8:28:14
s 91 0x7d0 --ra-ra-ra- topx topx topx topx 200 8:56:42 8:28:14
s 90 0xc80 --ra-ra-ra- topx topx topx topx 2 12:31:01 8:27:52 –a
Prstat
Code:
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
9202 topx 1460M 893M sleep 59 0 0:16:37 0.2% integrity_check/1
12455 root 3880K 3600K cpu65 59 0 0:00:00 0.0% prstat/1
9080 topx 142M 130M sleep 59 0 0:00:52 0.0% intf_resp_low/1
9125 topx 102M 78M sleep 59 0 0:00:36 0.0% interface_vsc/1
9121 topx 88M 80M sleep 59 0 0:00:32 0.0% interface_tcu/1
9120 topx 89M 80M sleep 59 0 0:00:29 0.0% interface_rcm/1
9124 topx 87M 78M sleep 59 0 0:00:29 0.0% baplie_merge_v2/1
9122 topx 86M 78M sleep 59 0 0:00:28 0.0% interface_eih/1
9115 topx 88M 77M sleep 59 0 0:00:33 0.0% intf_batch_even/1
9114 topx 88M 77M sleep 59 0 0:00:39 0.0% intf_event/1
9117 topx 87M 78M sleep 59 0 0:00:32 0.0% interface_bxy/1
9118 topx 86M 78M sleep 59 0 0:00:29 0.0% interface_ppm/1
NPROC USERNAME SWAP RSS MEMORY TIME CPU
41 topx 334M 2237M 3.4% 0:30:17 0.3%
43 root 186M 195M 0.3% 0:14:45 0.0%
1 noaccess 152M 136M 0.2% 0:04:00 0.0%
1 smmsp 3688K 11M 0.0% 0:00:04 0.0%
1 lp 1208K 3880K 0.0% 0:00:00 0.0%
6 daemon 7264K 9944K 0.0% 0:00:26 0.0%
Total: 93 processes, 259 lwps, load averages: 0.40, 0.39, 0.39
Prstat –mL
Code:
bash-3.00# prstat -mL
PID USERNAME USR SYS TRP TFL DFL LCK SLP LAT VCX ICX SCL SIG PROCESS/LWPID
9202 topx 0.9 0.0 0.0 0.0 0.0 0.0 99 0.0 2 0 5 0 integrity_ch/1
9080 topx 0.4 0.0 0.0 0.0 0.0 0.0 100 0.0 5 0 20 0 intf_resp_lo/1
9114 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 13 0 66 0 intf_event/1
17282 root 0.1 0.2 0.0 0.0 0.0 0.0 100 0.0 20 1 324 0 prstat/1
9117 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_bx/1
9118 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 interface_pp/1
9115 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 15 0 80 0 intf_batch_e/1
9121 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_tc/1
9125 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9120 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_rc/1
9123 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 0 70 0 interface_vs/1
9124 topx 0.2 0.0 0.0 0.0 0.0 0.0 100 0.0 10 1 70 0 baplie_merge/1
9122 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_ei/1
9119 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 8 0 56 0 interface_cp/1
9204 topx 0.1 0.0 0.0 0.0 0.0 0.0 100 0.0 15 1 1K 0 sys_check/1
259 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 13 2 98 7 in.mpathd/1
1 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 3 0 99 3 init/1
1337 noaccess 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 100 0 100 0 java/14
140 root 0.0 0.0 0.0 0.0 0.0 0.0 100 0.0 19 0 114 0 nscd/851
Total: 90 processes, 256 lwps, load averages: 0.40, 0.40, 0.39
Vmstat
Code:
bash-3.00# vmstat 1 10
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr m0 m1 m2 m3 in sy cs us sy id
0 0 0 87720712 60562856 173 645 199 44 44 0 0 0 0 0 0 886 2819 525 0 1 99
1 0 0 87563976 59743040 73 327 0 15 15 0 0 0 0 0 0 747 2831 439 0 1 99
0 0 0 87563656 59742808 61 306 0 15 15 0 0 0 0 0 0 770 2684 427 0 1 99
1 0 0 87563656 59742824 0 0 0 0 0 0 0 0 0 0 0 886 1302 525 0 1 99
1 0 0 87563656 59742816 62 305 0 15 15 0 0 0 0 0 0 722 2652 420 3 1 96
1 0 0 87563656 59742840 554 2777 0 139 139 0 0 0 0 0 0 959 9736 749 1 1 97
0 0 0 87563456 59742672 1155 5735 0 292 292 0 0 0 0 0 0 1113 17489 1145 1 3 96
1 0 0 87563656 59742840 0 0 0 0 0 0 0 0 0 0 0 845 1613 654 0 1 99
0 0 0 87563656 59742856 62 305 0 15 15 0 0 0 0 0 0 900 2647 526 0 1 99
0 0 0 87563656 59742856 62 304 0 15 15 0 0 0 0 0 0 683 2661 396 0 1 99
Mpstat
Code:
CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl
0 0 0 130 261 1 121 0 13 1 0 0 0 1 0 99
1 0 0 35 133 2 143 0 9 6 0 64 0 0 0 100
2 0 0 5 20 2 17 0 3 0 0 29 1 0 0 99
3 0 0 0 3 0 2 0 0 0 0 0 0 0 0 100
4 0 0 3 14 0 15 0 2 2 0 13 0 0 0 100
73 0 0 474330 77 3 0 7 0 2 0 2596 67 33 0 0
73 0 0 487701 37 0 0 7 0 8 0 2670 66 34 0 0
73 0 0 476377 14 0 0 8 0 1 0 2610 66 34 0 0
78 0 0 473950 11 1 0 7 0 13 0 2593 67 33 0 0
78 0 0 480562 9 0 0 7 0 4 0 2630 66 34 0 0
79 0 0 320989 14 1 0 8 0 0 0 1766 77 23 0 0
79 0 0 479148 9 0 0 7 0 8 0 2622 66 34 0 0
79 0 0 479426 13 0 0 7 0 2 0 2622 67 33 0 0
79 0 0 488949 9 0 0 8 0 13 0 2678 66 34 0 0
64 0 0 482229 15 2 0 8 0 7 0 2638 65 35 0 0
77 0 0 475571 14 1 0 7 0 8 0 2602 67 33 0 0
69 0 0 467795 22 1 0 7 0 40 0 2563 66 34 0 0
69 0 0 318623 9 1 0 7 0 8 0 1751 77 23 0 0
66 0 0 465179 92 1 2 8 0 62 0 2545 66 34 0 0
When my application running, some of CPU have IDLE state = 0 and hold the CPU while another CPU have IDLE state 100. I think this is my bottleneck but I cannot find any solution for solve that.
Netstat
Code:
bash-3.00# netstat -i
Name Mtu Net/Dest Address Ipkts Ierrs Opkts Oerrs Collis Queue
lo0 8232 loopback localhost 244022 0 244022 0 0 0
nxge0 1500 TOPX-01-DUMMY1 TOPX-01-DUMMY1 3594863 0 5801650 0 0 0
nxge1 1500 TOPX-01-DUMMY2 TOPX-01-DUMMY2 160954 0 151230 0 0 0
iostat
Code:
bash-3.00# iostat -xn
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
0.1 0.1 1.5 30.8 0.0 0.0 1.8 9.0 0 0 md/d0
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.9 0 0 md/d1
0.0 0.1 0.8 30.8 0.0 0.0 0.0 9.8 0 0 md/d2
0.0 0.0 0.0 0.0 0.0 0.0 0.0 15.2 0 0 md/d3
0.0 0.0 0.0 0.0 0.0 0.0 0.0 10.9 0 0 md/d4
0.0 0.0 0.0 0.0 0.0 0.0 0.0 19.4 0 0 md/d5
0.0 0.0 2.2 1.5 0.0 0.0 0.8 7.4 0 0 md/d6
0.0 0.0 1.1 0.7 0.0 0.0 0.0 8.5 0 0 md/d7
0.0 0.0 1.1 0.8 0.0 0.0 0.0 8.2 0 0 md/d8
0.0 0.1 0.4 0.6 0.0 0.0 7.6 10.0 0 0 md/d9
0.0 0.1 0.2 0.6 0.0 0.0 0.0 9.1 0 0 md/d10
0.0 0.1 0.2 0.6 0.0 0.0 0.0 7.8 0 0 md/d11
0.0 0.0 0.0 0.0 0.0 0.0 0.1 10.4 0 0 md/d12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.5 0 0 md/d13
0.0 0.0 0.0 0.0 0.0 0.0 0.0 8.4 0 0 md/d14
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.9 0 0 c0t0d0
0.1 0.5 2.1 32.3 0.0 0.0 0.0 9.8 0 0 c0t1d0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 c1t0d0
0.9 0.9 125.3 123.1 0.0 0.1 0.0 34.2 0 2 c4t600144F0CC00C29A00004D1E456F0003d0
0.3 0.7 20.7 53.9 0.0 0.0 0.2 8.2 0 0 c4t600144F0CC00C29A00004D1E43880001d0
0.1 0.2 50.7 111.5 0.0 0.0 0.0 59.1 0 1 c4t600144F0CC00C29A00004D1E453E0002d0
Please help me find the bottleneck of my T5440 server?Thanks so much for all your help.Moderator Comment and Action:
@ O.P.,
You cross-posted this to at least two other forum web sites:
http://www.linuxquestions.org/questions/solaris-opensolaris-20/application-running-too-slow-on-sun-sparc-t5440-but-run-normal-on-sun-m3000-4175411155/
http://www.unix.com/solaris/189945-application-running-too-slow-sun-sparc-t5440-but-run-normal-sun-m3000.html
... and didn't think that was important enough to simply mention the fact.
Timestamps suggest that OTN was the last place you posted to.
Poor forum etiquette.
Why would anyone spend the time to try to give help that you have already received elsewhere? That's a waste of their time.
(Yes, you already received the suggestion to use Dtrace in one of those other sites.)
This thread is locked as irrelevant. -
Java web start application runs too slow...
Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources. -
Please Help! All Sounds in Classic are too slow now!
Something dreadful happened (wish I knew what) and now every sound that is played back by any Classic application is about 70% too slow.
No matter if it is a Classic game like Unreal (I), Deus Ex, AvP for OS9 (the OSX version works fine), or Quicktime 6, or any other given Classic application. The only sounds that appear normal are the Platinum system sounds.
I don't know which files affect Classic sound playback or where they are located. Can't imagine what could cause that particular problem.
Hope someone could help...
Many thanks in advance
M:A:
PowerMac G5 2x2 GHz Mac OS X (10.4.6) 1.5 GB RAM, standard sound card (TI-TAS3004)
PowerMac G5 2x2Sorry, didnt get an email notification, so I just checked the thread.
Starting and quitting Garage Band actually helped!
(Imagine listening to the meaningful dialogues in "Deus Ex" spoken with Sesame Street's Cookie Monster voice. Aaaaannnd reeealllly sllloowwww. Doesn't quite capture the mood...)
Do you have an explanation why Garage Band should affect Classic sound output?
Thanks a lot,
Martin -
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584
Maybe you are looking for
-
I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help m
-
How do I permanently change a file name?
I have been ripping my DVD collection and importing the files into iTunes so they are available to watch using my AppleTV. For a movie I really don't care what the file name is as long as it is recognizable, but for a TV series I like to have files f
-
Problem in Copying Pricing Condition Type
Hi All, This problem is regarding copying pricing condition type in Sales Order. The problem is given below with an example - Qty of Material A - 10 PC. Condi Type Amount Currency Per UOM Condition value Currency ZP06 100
-
Creating order in order by clause
hi say in a data set i have value like col1 sam,tony,park,john without oracle's default order by clause how can i print data like tony,park,sam,john (it amy be any order without oracle's desc or asc) thanx
-
Problem finding port for e-mail
Hi Can anyone pleases inform me which port to use for out going mail and how to change the port? Thank