My dv6-6c29wm won't start up. it doesn't have any lights or fan.

it feels like it doesn't have any power at all. the little led light on the side of power port would blink once when i connect to power and blink once when i pull it. is there a problem with the motherboard? 

Here is your led code listing:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&dlc=en&lc=en&product=5218526&tmp...
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Similar Messages

  • XM5800, Phone won't start up properly, doesn't loa...

    XM5800, Phone won't start up properly, doesn't load after the Nokia Screen. Basicall I turn it on and it goes the Nokia screen and then my background pops up but then nothing else happens, if I try to press button, the "Use keyguard switch to unlock screen and keys" message pops up, and nothing happens if I try to unlock it.

    Levoh wrote:
    Right new problem, its turned on but I have no contacts now. Was that meant to happen?
    If you want to thank someone, just click on the blue star at the bottom of their post

  • My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

    Hey rulosrojos,
    The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
    iPod nano (6th generation): Hardware troubleshooting
    https://support.apple.com/en-us/TS3474
    Sincerely,
    Allen

  • Ihave an I Mac g5 it won't start up is completely dead have checked all the plugs

    I have an I Mac G5 it won't start up is completely dead I have checked all plugs ect I have had the back off and can see a tiny green light have pressed a few buttons but nothing works

    Anything here help?
    iMac G5: Fails to startup
    http://support.apple.com/kb/HT2173?viewlocale=en_US

  • HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

    My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

    Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

  • HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

    My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

    Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
    Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Please let me know the results so that I can try helping you further. Thank you.
    !-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
    If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
    I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

  • HT4061 iPhone won't start and I don't have the original sim tray in it all got mixed up

    My iPhone suddenly won't charge or now start I sent it to my carrier and they sent it back saying not the right sim tray for that particular phone problem is I have mixed up the sim trays and sold the other phone so no chance of getting it back what can I do ????

    My iPhone suddenly won't charge or now start I sent it to my carrier and they sent it back saying not the right sim tray for that particular phone problem is I have mixed up the sim trays and sold the other phone so no chance of getting it back what can I do ????

  • My iPad won't start up after being charged.  Any advice?

    My Ipad 2 won`t turn on.  I`ve charged it an hour.  Pressing the start button does nothing.  Any adviceÉ

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Itunes won't start up. Don't get any error messages.

    I just installed the CD for Ipod/Itunes that came with my nano. When I plug the nano into the usb port, the "do not disconnect" display comes up and Itunes attempts to start. The Itunes user agreement pops up on the screen for a brief second, then goes away without initiating the program. If I double click on the Itunes icon, the same thing happens and I cannot get the program to open. When I try to open quick time, I get the same results.
    My wife has used Itunes on and off for the past year on her RIO mp3 with no problems. I wonder if the napster and RIO manager programs are creating some sort of conflict. I do not want to delete them since my wife may need them for her RIO player.
    I am very aggrevated that I cannot talk to a human to resolve this issue. I have called the "1 800" number several times and was told by a computer to "try back later". I wasn't even given the option to hold for a tech.
    Any help is appreciated. Thanks.

    when i click on it it gives me the hourglass for a couple of seconds then it goes away and itunes never opens.
    ... by any chance, do you have Norton Internet Security 2005 installed on that PC?
    if so, let's try giving the trusty Lorraine M technique a whirl:
    Lorraine M: NIS/itunes problem rectified

  • Aperture 2 won't start with a networked disc attached - any ideas?

    Hi,
    I'm running Aperture 2 on a MBP. The Aperture database file and all deleted files are stored in the default locations on the laptop's internal drive. If the laptop is left off the network, Aperture starts normally and everything is okay.
    My network uses an Apple TimeCapsule as its wireless network hub. Attached to this through USB is a Drobo mass storage device which makes its files available throughout the house. The Drobo does not house any Aperture-related files.
    If I connect the MBP to the wireless network and start Aperture it hangs at the splash screen. It never finishes loading even if I leave it twelve hours. The Aperture task is using almost no CPU time and only a small amount of memory.
    If I disconnect the Drobo from the TimeCapsule and attach it directly to the MBP by FireWire, Aperture starts normally.
    The Drobo is healthy and can be used by other applications with only the slightest delay. The MBP's disk is in perfect working order with no errors. The machine has all the necessary updates and security fixes and Aperture is up to date.
    Does anyone know why Aperture is freaking over the networked Drobo? And are there any solutions?
    Many thanks in advance,
    Mike.

    I experienced the same issue today after enabling the TimeMachine capabilities of my Buffalo LinkStation NAS device for the first time.
    After which, Aperture 2 would hang at the splash screen indefinitely. This occurred even though I do not actually mount the shared Time Machine volume (as this is not necessary for Time Machine to use the service on the LinkStation).
    Turning Time Machine off allowed Aperture to start normally.

  • Apple macbook pro 15" 2 months old won't start after going to sleep. have to restart whole computer

    My Mac book pro will not start after closing the lid to put it to sleep. The keyboard lights up only. I have start the computer from start.

    Hello ellenlee8,
    For issues with waking from sleep, check out the troubleshooting in the article below as well as the additional troubleshooting to get your MacBook Pro Retinal  to wake normally again.
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    Regards,
    -Norm G.

  • Macbook Pro won't start up - Apple logo displays, but NO spinning gear, fans full speed

    Hi there,
    Not sure what could be causing this - when I start up my Macbook Pro, I get the grey screen, the chime, and the apple logo - but NO spinning gear appears, and after a little while the fans go to full speed.  it hangs like this forever.
    I recently installed a new 128 GB SSD, which seemed to be working great for awhile, but now I'm having this issue.  FYI I also have an OptiBay with a 500GB hard drive in it, but it's not the startup drive, it's only used for media storage.
    Any insight would be helpful, thanks!

    Hi S,
    Try an SMC Reset: http://support.apple.com/kb/HT3964
    Boot from install disc (insert disc> restart > immediately hold down the c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > select Disk Utility > select your HD in the panel on the left side (the name of the HD’s manufacturer and the model number, usually the top item in the list) > look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” (good) or something more ominous like “Failing.”
    If S.M.A.R.T. status is "Verified," run Repair Disk > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility (such as DriveGenius, TechToolPro, DiskWarrior) or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD which will need to be replaced (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

  • ITouch 1st Gen 8GB Won't Start and is not detected by any pc.

    My iTouch was working fine, but few days before it stops working, it wasn't recognized by any computer but was charging fine.
    Yesterday whereas I was listening music, the itouch shut off.
    Now; it shows the apple logo and shut off.
    I can't connect to pc, when I boot it on Recovery Mode,iTunes dont recognize it, my pc neither. No Bip No reaction.
    What can I do ?
    Cordially...
    <edited by host - see the [Terms of Use|http://discussions.apple.com/help.jspa#terms], section 2.6.3>

    . Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651

  • My Macbook Pro won't boot up, I don't have any discs...bought from Craigslist

    I bought my Macbook Pro (2012 model) from Craigslist and only had it about a week, but this morning I couldnt boot it up.  I didnt get any discs with this computer. Only the powercord.  What can I do to get it to boot up and where can I go from there?  There was a software update last night and this morning it won't boot up.  Is my only option going to Apple Store? Is there anything else I can try to at least get it to boot up??  Thanks so much. 

    Yea, it has Mountain Lion on it. I have tried starting while holding down Command-R, and also the Comand R, Option P, and still won't let me boot up.  I made an appointment for a Genius Bar... Is this who I make the appointment with for help with this?  We checked the seriel number from "About this Mac" and we went to view that it had a few years left of apple care. It happened right after a software update.  Wonder if that caused it. Is there viruses out there for Mac's and should I have a program to clean it up after I get it going or IF I get it going tonight?  Thanks,
    Curt

  • Finder won´t work. It doesn´t open any of my files, and when I try to force quit, it flahses, so i can´t click it. Help!!

    I have a Macbook Pro. I´ve just installed Lion version 10.7.3.
    Basically, one day I turned on my computer, and all my desktop folders and pictures were missing. And the finder just kept flashing with screen that said "finder quit while trying to restore all it´s windows" And you had the option between clicking To re-open the windows or not. Thing is, doesn´t matter what you clicked, because the thing kept flashing, so you couldn´t click it.
    I ended up using the "killall finder" Code in terminal to close it.
    But when that ended, turns out i can´t accsess any of my files. I can search them in spotlight, and if they are images, i can see them, but I´m uncapable of using my folders because they won´t open. Also, if you click the "Finder" app, it just opens the "All my files" Tab, for a split second before closing. I can´t force quit it, because when i open the force quit tab, the finder keeps flashing, so I can´t click it. Finder is killing me.

    Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

Maybe you are looking for