My DVD burner is not recognized by Premier Elements. Burns fine in Nero.

Premier Elements will not find my DVD burner. It works fine in Nero. I have been to tons of help site. Removed registry filters, uninstalled and reinstalled. Same problem.

A Nero module MAY be your problem
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements 13 WILL write a DVD or BluRay to an ISO (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum

Similar Messages

My cd/dvd rom is not recognizing the cd or dvd. it makes it impossible to run my backups.

hi im having big problems with my cd./dvd rom. its not recognizing that i put a blank cd or dvd in when i run my backups. any help would be greatly appreciated. i have a notebook presario cq61-411wm with win 7 64 premium os. the windows security center keeps telling me to put in a blank dvd and i do, to no change in response from the pc. help

Hi,
For this issue,I would like to know if we can access or see the file in the DVD.
Did you receive the error message？
I suggest you check the Device Manager to see if the device is marked with a yellow exclamation point.
Meanwhile,please use the CD/DVD troubleshooter tool ,which can automatically find and fix some problems with CD/DVD.
http://go.microsoft.com/?linkid=9840807
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

Dual-Boot.. But Can The Old DVD Burner Work With Nero 9?

hi,
i have an imac(intel), so i added windows vista to my imac.
i have an old dvd burner that only works under windows.
my question is that the "disc drivers" are from OS X v10.5.8 "bootcamp". will the driver support my old dvd burner run under nero 9 reload?
thanks in advance.
ed

Typically, Windows has its own methods of installing the needed drivers. The drivers that the Boot Camp utility installs are to allow Windows to use the Mac hardware, such as the display, iSight camera, microphone, keyboard/mouse, etc., NOT for any third-party hardware. When it is booted up with Windows, the Mac is a Windows machine, so you need to do whatever you did before to get the DVD burner to work under Windows. That may have been installing software from a disc that came with the burner; it may have been downloading a driver installer .exe file...
Since you have the Mac, the Windows Vista installation, and the burner, is there a reason you can't give it a try?

Canon 7D MRaw files not recognized by PS Elements 8 on Mac OS X

Canon 7D MRaw files are not recognized by PS Elements 8 on Mac OS X.
After I installed CR 5.6 I can see MRaw files in Bridge CS4, but the files still do not open in PS element 8
Can anything be done to fix this?

Hi again,
I found "Library\Application Support\Adobe\plugins\CS3 (or
CS4)\Fileformats". As it happens, the camera raw.plugin 5.6 was already
installed for CS4 but not for CS3, which I therefore proceeded to do. When I
tried to open a Canon 7D MRaw file in CS 4, PSE opened with the same error
message as before, i.e the file format was not recognized.
However, just for the fun of it I tired to open the same file from CS3 in
PSE 6 and it works! but with the warning that the ACR expires in Jan 2010, I
think
So, there is still something wrong with the CS4/PSE 8, but I think I like
PSE better so I am OK for now - although the irony is that the only reason I
bought PSE 8 was to be able to work on Canon 7D raw files.....
Thanks,
Niels R

Getting error "this serial number is not valid for Premier Elements 12"

My old computer crashed big time and I'm trying to install Elements 12 on a new computer. Installed ok and when trying to register it, I'm getting the error message "This serial number is not valid for Premier Elements 12." Didn't install Premier Elements 12, just Elements 12. Unable to get any assistance yet from Adobe support, hope to learn something here. Thanks in advance.

Have you activated the product previously on more than two machines? You will need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

After complete OS reinstall, software DVD's are not recognized

I recently had to completely reinstall my OSX and wipe my HD. I did this for 'spring cleaning' so to speak.
After my Erase and Install OSX I started reinstalling the various software I use. These included both CD and DVD install discs. Smaller programs, on a Install CD, work just fine and have been installed.
However, my larger software that come on Install DVD's are not being recognized by the superdrive. For example, I have tried all of my Adobe CS4 DVD's, as well as my Pro Tools DVD. The same thing happens to all of them.
I insert the DVD, it starts whirring/spinning in the drive, then it slows, stops, then repeats. As if it is attempting to read the DVD over and over and over again. This process continues for about 3-5 minutes until it simply gives up and pops up a box saying that I have inserted a blank DVD.
Obviously none of these DVD's are blank, in fact they contain the very expensive and important software that I have purchased! It is also frustrating that I have to wait this 3-5 minutes before I have the option to eject the disc, as the superdrive is continuously trying to read it.
I tried booting the computer with CommandOption+PR as was suggested, but that didn't change anything.
Suggestions? Thank you.

Run a DVD Lens Cleaner disc through it, often just a tiny spec of dirt or dust will cause read issues.

MY DVD Drive is not recognized by the Device Manager

Hi,
I own a Presario 6608AU version notebook.
The prob is since i removed Windows Vista from my notebook and install WIN XP my DVD drive is not working. Neither is it recognized by the Device manager too.
I have tried for all solutions available on net.
Should i install any drivers for the same. please help me

I am also having problems I have a brand new HP G71-34OUS Notebook with Windows 7 I can't use CD's or DVD's the computer is not reading them. I need to know where to find the drivers to download please help me with this

CD/DVD-ROM is not recognized.

I recently replaced my HD and all is well except the CD/DVD-ROM isn't recognized. It worked fine before the old HD crashed.
I'm not familiar with jump settings but on the new hard drive there is a diagram that shows choices of "Device 0", "Device 1", and "Cable". I'm assuming that the jump pins are on the right rear of the HD and there is no jump connecting two pins. This tells me it's set to "Device 0" I'm guessing I need to set them to "Device 1". The HD came with nothing to connect the pins. Where can I get a jumper for the Fujitsu HD and will this get the optical drive going again?
Pete
ibook G3 dual Mac OS X (10.3.9)

I'm not sure if this will help, but some time ago I saved this link to a PDF on jumper settings:
http://www.wdc.com/en/library/eide/2579-001037.pdf

Satellite M100 - DVD-Multi-Drive not recognized as CD/DVD recorder (!)

Hello,
after installing Win XP SP3 in the last windows update, the Toshiba tools as well as other CD/DVD-burning software don't recognize the DVD-ram drive as such, only as a CD-rom-drive.
Thus, software like recordIt doesn't work.
I have already removed the drive from the hardware list and have reinstalled it.
The driver used is "Mat****a DVD-RAM UJ-841S"
That is correct, so far. But it doesn't burning CDs/DVDs.
Has anyone noticed this problem as well?
Thanks.
Bjoern

Hi
I think its a lower upper filter issue and I think you could solve this following this step by step instruction.
First of all remove the ODD (CD/DVD) drive from the list in device manager.
Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Finally you should reboot the unit.
After that windows will recognize the ODD again

Dreamweaver 2004 MX is not recognizing my form elements

Has anyone run into a problem with an insert or update server
behavior not recognizing form elements? I created the page and now
when I try to make any changes I get an error.
"Column 'sccb_comments' is mapped to a form element that does
not exist. Please map the column to an existing form element or set
its value to 'None'."
The problem is that the insert dialog box recognizes the
form, but not any of the elements in it.
I know that I need to upgrade to CS4, tell my director to
cough up the funds.

There must be something else happening on your page. But I
have no idea
what that might be. This should work. Sorry.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Reidster" <[email protected]> wrote in
message
news:[email protected]...
> Murray,
>
> You replied,
> "It wouldn't matter. It's perfectly valid to have
<div> tags in side
> <form>
> tags. And it's not DW's preferences you need to worry
about - it's HTML's
> preferences, so to speak. I suspect that something else
entirely is
> causing the
> problem. Without seeing your code, though, we cannot
know what that might
> be."
>
> Sometimes what should work or one would think should
work doesn't. As in
> my
> case, the <div> tags inside my for was the issue.
Here is the original
> code
> that did not allow me to assign form objects to fields
in my database. The
> server behavior also displayed an '!' in the application
window until I
> moved
> the <div> tags outside of my form.
>
> <form name="frmEditRelease" id="frmEditRelease"
method="POST"
> action="<?php
> echo $editFormAction; ?>">
> <div id="new_prod_rel">
> <p><select name="sccb_status"
id="sccb_status">
> <option value="0" <?php if (!(strcmp(0,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
?>>Open</option>
> <option value="1" <?php if (!(strcmp(1,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Pending</option>
> <option value="2" <?php if (!(strcmp(2,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Approved</option>
> <option value="3" <?php if (!(strcmp(3,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
?>>Denied</option>
> <option value="4" <?php if (!(strcmp(4,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Deleted</option>
> <option value="5" <?php if (!(strcmp(5,
> $row_rsEditRelease['sccb_status']))) {echo "SELECTED";}
> ?>>Deferred</option>
> </select>
> <label for="sccb_status">SCCB Status</label>
> </p>
> <p>
> <select name="sRelease">
> <?php do { ?>
> <option value="<?php echo
$row_rsProj['project_vchar']?>"
> <?php
> if (!(strcmp($row_rsProj['project_vchar'],
> $row_rsEditRelease['release'])))
> {echo "SELECTED";} ?>><?php echo
$row_rsProj['project_vchar']?></option>
> <?php } while ($row_rsProj =
mssql_fetch_assoc($rsProj));
> $rows = mssql_num_rows($rsProj);
> if($rows > 0) {
> mssql_data_seek($rsProj, 0);
> $row_rsProj = mssql_fetch_assoc($rsProj);
> }
> ?>
> </select><label for="sRelease">
Release</label>
> </p>
> <p>
> <select name="lifecycle">
> <option value="System Reqts." selected="selected"
<?php if
> (!(strcmp("System Reqts.",
$row_rsEditRelease['lifecycle']))) {echo
> "SELECTED";} ?>>System Reqts.
> <option value="Analysis" <?php if
(!(strcmp("Analysis",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Analysis
> <option value="Design" <?php if
(!(strcmp("Design",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Design
> <option value="Code" <?php if (!(strcmp("Code",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Code
> <option value="Testing Phase 1" <?php if
(!(strcmp("Testing Phase
> 1",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Testing Phase 1
> <option value="Testing Phase 2" <?php if
(!(strcmp("Testing Phase
> 2",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Testing Phase 2
> <option value="Alpha" <?php if (!(strcmp("Alpha",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Alpha
> <option value="Beta" <?php if (!(strcmp("Beta",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Beta
> <option value="Gen. Release" <?php if
(!(strcmp("Gen. Release",
> $row_rsEditRelease['lifecycle']))) {echo "SELECTED";}
?>>Gen. Release
> </select><label for="lifecyle">
Lifecycle</label>
> <input name="sub_ticket_id" type="hidden"
id="sub_ticket_id"
> value="<?php echo
$row_rsEditRelease['sub_ticket_id']; ?>">
> </p>
> <p>
> <input <?php if
(!(strcmp($row_rsEditRelease['test_only'],1)))
> {echo
> "checked";} ?> name="test_only" type="checkbox"
id="test_only" value="1">
> <label for="test_only">
Test Only
> <input name="ticket" type="hidden" id="ticket"
value="<?php echo
> $row_rsEditRelease['Ticket']; ?>" />
> </label>
> </p>
> <p><label for="sccb_comments">SCCB
Comments</label><br /><textarea
> name="sccb_comments" cols="60" rows="5"><?php echo
> $row_rsEditRelease['sccb_comments'];
?></textarea>
> </p>
> <p>
> <input type="submit" name="Submit" value="Submit"
/>
> </p>
> </div>
> <input type="hidden" name="MM_update"
value="frmEditRelease">
> </form>
>
> It's not until if move the <div> tags outside of
the <form> tags does the
> '!'
> on the update server behavior go away.
>
> Any thoughts?
>

Panasonic GS120 camcorder not recognised by premier elements

Panasonic dv camcorder GS120 not recognised by premier elements

Hi Steve
Thanks for the advice but I am connecting with Firewire. I did have suspicions that it could be something to do with the IEEE-1394 driver but cannot work out how to update it. Would be obliged if you can give me some clues.
Windows 7
I have now set IEEE 1394 to legacy driver but have not tried Premier yet. Will keep you informed.
Thanks and Regards
Terry Cole

HP DVD Writer 740b not recognizing DVDs

My 740b will not recognize DVDs. I have no problems with CDs but any DVD I put in the tray isn't recognized. I initially thought the problem was with the DVD+R I was using but I also have a Slimline s3132w with a DVD writer installed and it burned and read the same discs with no problems. I tried several commercal DVDs (movies) and when I try to play them I get a no disc in drive error. I also have a Lite-On DVD SOHD-16P9S DVD ROM on the same system and have no problems what so ever playing the same discs. I have tried replacing the ATA data cables post attempting the trouble shooting tips given on the support web page. I have upgraded the firmware hoping this might alleviate the problem with no success. As I stated before this problem is only with DVDs, the drive has no problems what so ever with CDs. I have a feeling the problem my be with my updating to Windows XP SP3. I had done so before but removed it because my Linksys Wireless Adapter(PCI) wouldn't function with it installed. That problem has been repaired and now this. The system the drive is installed in is as follows:
HP a1203w
                  cpu: Athlon 64 3800+ @ 2.2ghz
            video: ATI 9550 w/256mb video memory
               audio: Sound Blaster Audigy Z2S Platinum
         boot drive: Seagate ST340014A 40GB
secondary drive: Seagate ST3250620A 250GB

OK chalk me up too to the list of users whose HP DVD Writer 740b cannot "see" blank DVD's and CD's.
Full marks to HP in that I am still smoothly running a Pavilion Media Centre PC EG211AA-ABG m7288a. I find the older plug compatablity useful and have beefed up RAM making it still a powerful "retro" media machine after all these years.....
However after a power failure caused a disk error that trashed my Windows XP and while it restored (as in full reset) like a trooper I took the opportunity to do a clean upgrade to Windows 7 (64bit) seeing as XP is no longer supported. And yes my HP DVD Writer 740b cannot detect blank DVD's and CD's although it can read those with content. It seems to be acting more like a CD ROM drive than a Read Write drive.
I have tried ALL the suggested fixes to no avail and yes my "shell detection" service is operational and on automatic.
But here's the rub as it were. My HP Support Assistant assures me that I have a HP DVD Writer 740b installed and running ED24 firmware. So I was hopeful when I found that there was an HP upgrade from the ED24 firmware (sp26595.exe - DVD-RW 16X HP DVD Writer 740b Drive Firmware Update ). HOWEVER even if I run it in XP compatable mode it returns the message that I do NOT have a HP DVD Writer 740b installed and therefore no upgrade is required.
The label on the front of the drive is "LightScribe DVD +/- Writer / CD-Writer".
Is the HP Assistant wrong in identifying it as an HP DVD Writer 740b? Also could the drive be getting confused thinking a blank disc is a lightscribe disc in upsidedown ready for printing? I have to try and find a way to reload the LabelPrint software (have the LSS) that was lost when I upgraded to Windows 7. Probably can't retrieve it from the old XP recovery disk.
Any NEW thoughts (especially as to why firmware upgrade does not see the drive) most wrlcome as apart from this one little thing the Pavilion is performing like a trooper and is an excellent advertisement for the durability of HP products (which is why we brought 3 HP laptops as well.
Hopeful thanks in advance.
Dogbytes

Memorex DVD-RW spinsm not recognized, ejected

My wife has a MacBook Pro running 10.5.1 with these specs:
HL-DT-ST DVDRW GWA4080M:
Firmware Revision: AA26
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 0 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
When inserting Memorex DVD-RW and Verbatim DVD-R both blanks discs spin then stop and get ejected. there's not even a pop-up saying it isn't recognized. Sometimes, the DVD-R by Verbatim burn but can't be read in her optical drive (but they can be read in my MacBook with all info in tact!)
Any ideas what's wrong with those discs or with her optical drive?
She has some success burning Melody DVD+R discs. Her drive can also read those.
According to the hardware specs listed above her computer should be able to read all of those discs.
Thanks for any help you can provide.
Message was edited by: SteveAndRebecca Hanlon

You will want to ensure your USB DVDRW drive is properly connected to the Windows 8 VM in question.
To check this you will want to use the Vmware vSphere client to connect to your Vmware ESX/ESXi host.
Next, you will want to edit the settings for your Windows 8 virtual machine and check that you have added a USB controller and then connected the USB device to the controller. This is a manual assignment. If your DVDRW drive you wish to connect is actually
connected via SATA on the motherboard of the host then you will want to go through the same process to ensure the CD/DVD drive of the host has 'connected' and 'connect at power on' selected under settings.
Below is a screenshot of what you should see:

My CD/DVD Drive is not recognized any longer

I can't seem to get my computer to recognize my CD/DVD drive any longer. I'm using Windows 8.1. Recently, hp replaced the drive. However, now it's not being recognized. Can someone please help? Below is my product information:
HP ENVY 23-c210xt All-in-One CTO Desktop PC (ENERGY STAR)
Model6U51AV#ABA
FYI...I now have a cd stuck in it, because even the eject button doesn't work. I've shut my computer down, unplugged it, and restarted it. I've tried re-installing drivers. Nothing has worked.

Hi,
You need to contact HP Support and get a service technician to correct your problem. It's hard for me to believe that HP would have replaced the optical drive without ensuring that it worked.
HP's support number is 800-474-6836 or 800-HPINVENT or online here.
Let us know if you have more issues. We can try to get your problem escalated.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

DVD stuck, drive not recognized in system profiler, can't eject, HELP!

I am distraught, my DVD/CD drive is quite sick, if not dead. Alright, I watch DVDs on my computer somewhat regularly, but this one time I was about an hour into a movie when it just stopped playing. I couldn't finish the movie because now my computer doesn't recognize the disc or even the fact that it has a DVD/CD drive at all. The DVD doesn't appear on the desktop and the eject button doesn't do anything, it's been stuck my drive for maybe a month or so and I forgot about it for a while actually.
The scariest thing is that when I check my system profiler I can't find any info about my DVD drive. When I click on disc burning, it says I dont have a disc burning device installed.
I've tried resetting the power manager (PMU) but to no avail. I would really like to solve this without taking my computer somewhere.
Any suggestions?

Welcome to Apple Discussions
Simple step first. If the "stuck" is due to a software problem, restart the computer holding down the click pad through the start-up until the disk ejects. This usually ejects anything in the drive.
You'll find other suggestions here (Donald Worrell post).
If none of the above suggestion work, you'll need to get a technician (Apple certified, if still under warranty) to look at the machine. If the DVD ejects, but the profiler still does not recognize the drive, then a trip to the Technician is your only recourse.

My DVD burner is not recognized by Premier Elements. Burns fine in Nero.

Similar Messages

Maybe you are looking for