My DVD/CD-ROM and floppy disk drives can't read or write contents

When I check through the computor it says verything is working. I have some CD's I wrote data and files to with this computor but for some reason it's showing me that there's nothing on the floppy's or the CD's.
Mined you I have another computer and its able to see, write, save, to these same Floppy's or CD's.
It's also telling me to load the CD when its already in the RW devices in my computer.
I just reloaded everything on to a new hard drive in April, I used the DVD/CD-RW and everything was fine.
My model is Satellite 2415 S205. I have reloaded Drivers. What else can I do? I refuse to believe the RW/DVD and the "A"  went bad at the same time.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Similar Messages

  • Ipod Touch message "itunes can neither read nor write to "my Name" disk.

    While syncing my Touch on I- Tunes, everything stopped and the message was "can neither read or write to B-----J-----"s ipod disk. I was on the phone for hours with Apple support, sent the Touch back twice to no avail. Finally found a newly acquired song from I-tunes stopped the sync in its' tracks and could not be recovered from. Has anyone else had this problem?

    I have a second gen which I received today as a replacement from Apple as they thought that might solve my problem. I found a recently acquired song, David Gilmore's "Where We Start " caused the crash. I did a manual load of the touch after a restore of it"s software and tunes. I watched the computer screen as I updated several songs at a time. I recreated the problem three times so I am confident I know what caused it but the only way I know around it is the slow process of a manual update. I have reported it to Itunes because this has taken me two weeks to figure out.

  • Floppy Disk Drive for Mavericks

    Hello
    Does anyone know of an FDD for a mavericks mac? I would like to create boot disks for an old mac. Is this a good method to consider? I am not sure how else to go about this. If there is an alternative, whatever it might be, please let me know.
    I apologise for posting here but this relates to older machines in a way.
    Thanks in advance.

    The original system for a PowerBook 2400c/180 was 7.6.1. Other supported systems (according to Apple's technical specifications) were 8, 8.1, 8.5, 8.6 and 9. You would need to purchase an appropriate Apple system CD. Ensure that it is a retail disc (for all models), not a disc for a certain (other) machine.
    You can use one of the Apple CD-ROM drives above, providing that you have the proper HDI-30 cable. See the manual for details about connecting SCSI devices and about booting from a CD.
    If necessary, and if the already installed operating system is working (and you can navigate the Japanese menus), you should at least be able to create a Disk Tools PPC floppy on the PowerBook. Use the Disk Copy 6.3.3 program (the Make a Floppy command under the Utilities menu) for this. I assume that you have the external floppy disk drive for the PowerBook.
    www.info.apple.com/support/oldersoftwarelist.html
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/System/Mac_OS_8.1_Update/Disk_Tools_PPC.img.bin
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_6.3.3.smi.bin
    One may also want to try to modify a Disk Tools PPC to hold CD-ROM software, thus allowing a CD to be read when the computer is running from the floppy disk system.
    Additionally, since the computer in question has PC Card slots, an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card can be very useful for file transfers. In certain PowerBook models, such a CompactFlash card (reformatted to Mac) can even act as a startup disk (if it has an appropriate system folder).
    Jan

  • Accessing physical floppy disk drive from Windows 8.1 host machine to Windows XP SP3 hyper-v?

    Hi there!
    Could someone help up me? I just wanted to ask if it's possible for a hyper-v to access a physical "floppy diskette" drive?
    Here's my setup: I have a Windows 8.1 as my host and Windows XP SP3 as the virtual machine. I would need to access the contents of the physical floppy diskette drive from the Windows XP SP3 vm. This is needed, because, currently our customer is still using
    floppy disk drives, to most of their in-house applications. I tried to open Drive A: inside Windows XP SP3 VM while the physical diskette from the Windows 8.1 is inserted. But then again, it cannot directly access the contents. Also, I tried to use "virtual
    floppy drives" and copy the files from the diskette. But for some reason, their applications do not support it. I did check device manager in Windows XP SP3 vm, but i cannot see the "Universal Serial Bus Controllers" option inside the VM.  
    Please help!!! Thank you!
    All the best,
    MS CAMPer

    HI Carey, thanks for this, But this is under System Center Virtual Machine Manager. I already saw this a while ago.
    Anyway, is there a way for Windows XP VM to access a physical floppy diskette drives inserted to Windows 8.1 host machine? I dont intend to use Virtual floppy disks. Only Physical ones.
    Please please. Need your help guys! :( Thank you!

  • External floppy disk drive

    I have an HP F1059C External Floppy Disk Drive by TEAC that came with a (really) old HP laptop. I have some old research saved to floppy disks I need to access.  Is there a cable that will convert my External drive to a USP port on my present  HP laptop with Windows 8?  Do  I need a new driver?
    Thanks 
    Oxford Designer

     Thank you Dean Huffy. Yes, I recall it was an omnibook.  I loved the compactness of the thing.  And it had enough heft one could throw it like a brick at someone's head if they made fun of it.   Your advice alone is worth the $30 and elegant in its simplicty. 
    If you have the patience, I would add another permutation to my situation.   After the Omnibook's monitor went dark the files were tranferred via it's floppy drive to its desktop successor, for which I ordered a redundant floppy drive for that purpose.  There it rested, with some updates, but unbidden for the past five years until the desktop crashed and I replaced it with the present laptop.  I took the two units to my local computer repair person who neatly transferred most if not all the contents of the former to the latter, EXCEPT THAT, when I try to open the one, much coveted file, I get a message "cannot convert password protected documents".  Okay, so had so much regard for the file I put a password on it, but I can't even get to a point where I can enter a password; and following the Windows advice to "Open and Repair" seems to have no impact.  
    The bottom line is, I am most grateful for your advice on how to recover the file as of 2001 from an old back-up floppy , but would be even more grateful if I can recover the file through its 2009 updates now on my harddrive (and perhaps a back-up CD.)
    Thank you, again.
    Hank

  • Solaris 8 Floppy Disk Drive Problem

    Hi to all!, I need help with Solaris 8 10/00 Intel. I�ve installed it and everything works fine, but I cant make the system to recognize the floppy disk drive, everytime I do a "volcheck", it just ignores it. Inside CDE happens the same thing, when I do check the floppy, nothing happens. Any clue?. I�m using an AMD Athlon 700, with VIA KT133 chipset. Thank a lot!.

    Try "ftp" + your email address. (but "anonymous" works, too).
    Perhaps a typo or there was some other temporary problem with the
    web site.
    The K7M boards have different bios release numbers, it seems the
    first bios release had a revision number of 1007:
    ftp://ftp.asus.com.tw/pub/ASUS/mb/slota/k7m
    Do you have to boot using the DCA floppy for some specific reason?
    (for example to install using the >32GB ide-drive patch; network install
    and no local cdrom drive; El-Torito CDROM boot does not work at all)?
    Or do you have the system already installed by booting from CDROM,
    and you just want to get usable floppy/serial/parallel ports under
    solaris 8? In that case have a look at http://www.tools.de/solaris/via/. I've written a small driver that attaches to the VIA
    686A SouthBridge PCI/ISA device and it re-enables the Super-I/O
    controller on that chip. The Super-I/O chip is disabled due to the
    solaris ACPI bug and is the reason all these on-board devices do
    not work under solaris 8. According to
    http://www.asus.com.tw/products/Motherboard/SlotA/k7m/spec.html, the K7M uses the same SouthBridge chip, so my driver should work for
    this board, too.

  • External floppy disk drives for the new iMac?

    I'm trying to move a whole slew of files I created on a Macintosh from a longtime back--the original Mac--and they are all saved on floppy disks. I recently bought a Sony MPF88E not knowing it didn't work with the new Leopard OS. Are there any external floppy drives out there that do work with the new OS?

    Hello and Welcome to Apple Discussions. 
    I just dug out my +TEAC FD-05PUB+ (which I originally bought for an iMac DV running OS 9.0.4!). It works fine* on my Aluminium Intel iMac 2.8GHz.
    I'm not sure why the Sony wouldn't work. Does it appear in System Profiler and/or Disk Utility?
    mrtotes
    * by fine, I mean normal, but I'd forgotten how bad floppy disks are...

  • Where can I buy an external floppy disk drive for my Macbook?

    where can I buy an external floppy disk drive for my Macbook?

    You can find them on eBay http://www.ebay.com/sch/i.html?_odkw=usb+floppy+drive&_osacat=0&_from=R40&_trksi d=p2045573.m570.l1311.R1.TR2.TRC1.A0.Xusb+floppy+drive+for+mac&_nkw=usb+floppy+d rive+mac&_sacat=0

  • HT1863 i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help

    i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help. in chennai. I also need to retriwve my warranty paper online, as I am right now in chennai ad all my docs are in Cleveland.

    You posted in the iPad forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • I got photoshop elements 13 and premiere elements 13 for christmas for my Mac Book Pro but it does not have a disk drive can I use the ss

    I got photoshop elements 13 and premiere elements 13 for christmas for my Mac Book Pro but it does not have a disk drive can I use the ss# to download this online? How do I do this?

    Download from
    Download Photoshop Elements products | 13, 12, 11, 10
    Download Premiere Elements products | 13, 12, 11, 10
    Install then enter your serial number when prompted.

  • I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

    I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

    Hi,
    Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
    However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
    Jan

  • Error: DVD drive won't read or write discs. TS-L633R CD-DVD drive. HP DV6-3120US notebook. Win 7.

    Product Name and Number: 
    HP Pavillion dv6-3120us
    OS
    Windows 7, Home Premium. 64-bit.
    Error Message
    "Insert a Disc; Please insert a disc into E: drive."
    Background
    Pre-installed Windows 7 system on computer recognized CD/DVD ROM drive for about 3 months. Malware corrupted the OS. I re-installed the OS from the recovery drive's partition. CD/DVD ROM drive failed to read or write, and I cannot restore old files or back-up current configuration via CD/DVD ROM drive. All updates for Windows 7 and hardware drivers seem to be installed and up-to-date as of 10/4/2011. 
    Troubleshooting Steps
    1. Tried to read audio CD. Same error message.
    2. Tried to read data CD-ROM. Same error message. 
    3. Tried to read data DVD-ROM. Same error message. 
    4. Writing to DVD ROM failed. Same error message.
    5. Re-loaded OS 2nd time. No change. Same error message.
    6. Checked with HP Support Assistant. DVD drive is recognized, but not media. No change. 
    7. Checked Device Manager. DVD drive is recognized as TS-L633R. 
    8. Driver is cdrom.sys version 6.1.7600.16385. Clicked Update Driver, no change. 
    9. Tried uninstalling and re-installing the driver. No change.
    10. Checked BIOS. AMD Turion II P540 Dual Core processor 2.4Ghz. BIOS appears to be up-to-date, version F.27. 
    11. BIOS lists CD/DVD ROM drive as bootable. Re-ordered drive to boot first and used Knoppix Linux boot disc, no change. Windows booted instead. 
    12. Reviewed registry for "upper filter" and "lower filter" entries.  Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper filter or lower filter entries present. No change. 
    13. Ran "Hardware and Devices Troubleshooter"; it cannot detect the cd/dvd. No change. 
    The drive has power, spins, is recognized by Windows 7 and the BIOS. However, it will not read or write CD ROM or DVD ROM discs.
    I'm out of options.  What else can I do to make the cd/dvd rom drive read and write cds?
    Thanks for your help.  Matt
    This question was solved.
    View Solution.

    Update:
    I chatted online with Ben S. at HP tech support via the HP Support Assistant. Helpful guy. Thank you, Ben. He worked through it and his counterpart Alan is sending me a new DVD/CD drive. Ben S checked the following:
    1. Confirmed that I had tried multiple discs to check different formats: DVD-R, CD-RW, audio CD, video DVD, software data CD. None were recognized.
    2. CD/DVD icon appears in My Computer. Confirmed.
    3. Checked Device Manager for yellow exclamation marks. None present.
    4. Opened below Device Manager and checked for yellow exclamation marks. HP CDDVDW TS-L633R ATA device listed correctly. Redundant, but I understand; it's a good check.
    5. Confimed the Model and Serial Number. 
    6. Asked whether I had done a System Recovery.  I had. Twice. First time it didn't restore the drive, so I thought I'd try it again. Second time also did not restore the drive. 
    7. Ben S. concluded that the drive has a hardware malfunction, and offered drive replacement under warranty since I purchased in April. I should have it by Oct 17, and then I have 15 days to return the broken drive or I'm charged $80. 
    Alan offered an additional year of warranty service for about $100. Ben's guess on the root cause was a bad lens from stress on the DVD tray. I don't recall any stress events. I've had this laptop since April, 2011, and the drive failed at the end of September.  7 months. This surprised me considering I've got other notebook computers with drives that have lasted years and still haven't failed. 
    I'll check in when I get the replacement drive.

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • LiteOn Combo Drive can't read any media

    My LiteON Combo drive can't read any media(CD/CDR/CDRW/DVD). Doubted OS or driver problem since I can't even boot from any bootable Cd and my RedHat Linux 9 too can't read any media. The Combo Drive are detected in BIOS. Works perfectly well on other PC.  Compatibility problem?

    i'm using
    MSI K7T266 Pro2
    AMD Duron 1.0 Ghz
    256DDR Kingston
    Western Digital 80Gb 7200rpm 8mb cache
    Prolink GeForce2MX 200
    Sony 52X CdRom
    Realtek Network Adapter
    Windows XP/RedHat Linux 9.0
    i've updated to the latest bios ver using MSI Live Update

  • "Can't Read Or Write to disk" Video Won't Transfer To Ipod

    I have transfered videos to my ipod in the past but I have two tv shows from the Itunes story that won't transfer.
    They are in the correct mpeg 4 whatever format. My itunes is the most resent version, but for some reason I keep getting the same error.
    "Cannot Read Or Write To Disk".
    HELP??!!
      Windows XP  

    I've got this problem too. My 5g iPod 30gig syncs after about 3 minutes with iTunes then after loading songs and videos after 10 minutes i get the same message your getting - "Can't Read Or Write to disk". I think theres some kind of USB2 conflict or something. All my other USB devices work fine. All my drivers and software is up-to-date.

Maybe you are looking for

  • AP Impersonation on WLC

    Has anyone seen the WLC reporting its own APs as impersonating APs? I checked the forum and found one conversation relating to this and my 802.11a is set to Country already. But I am see ing this on the B/G side. Any thoughts?

  • Lower .swf file affecting mouse on top level .swf

    I have a zooming map .swf file loading in behind a navigation button interface .swf. The map.swf turns your mouse to a hand cursor so you can pan when you zoom in on it. Eveb though the map file is behind my nav file,when I roll over my nav file, the

  • Widget trouble: strangeness

    My widget function has suddenly changed (perhaps after an automatic software upgrade?). Two things are most conspicuous: first, the hands on my clock have completely disappeared. The clock appears, but hands do not. Second, my dictionary widget has c

  • Adobe Camera RAW 3.5

    das Update für den Adobe Raw Converter 3.5 für CS2 und Elements 4.0 (u.a. für Nikon D2Xs) ist unter www.adobe.com/products/photoshop/cameraraw.html zum kostenlosen download bereit.

  • Getting a Presenter 8 trial to run

    I downloaded a Presenter 8 trial onto the Windows 7 side of my iMac, using VMWare Fusion.  The only program in the package that runs is Adobe Presenter Video Creator 8.  Presenter 8 files were downloaded but I cannot find any program resembling a Pre