My DVD drive doesnt work

My dvd drive doesnt work, and i want to format the HD, any ideas??? i have an external dvd drive but it doesnt recognice it when i want to install the OS,
... Maybe someone can tell me how. Thanks

Time to take your disc and your computer to an Apple Store or an AASP, I'm afraid. They should be able to reinstall the OS, etc. Have no idea what they would charge but I'm sure that it would not be too expensive.
Clinton

Similar Messages

  • Re: Satellite Pro A120 - CD/DVD drive doesnt work anymore

    Hi, I have a Satellite Pro A120, and keep on having problems with my CD/DVD driver. I spoke to few of you on the phone, the fix it solution on http://support.microsoft.com/kb/314060 seems to do the trick for a couple of hours and then I am back to square one.
    Today, I think I have reached the end of my possibilities, the solution above no longer works, I have a message that says that it doesn't work for the specifications of my PC.
    In the meantime, something must have happened because my webcam, that I have since 2007, no longer works either, and in spite of the fact that I have tried time and time again to install those drivers, the PC just won't allow me.
    It's a dead end really...
    And... yes, I have done the business of going to Device Manager, disable the CD/DVD driver facility etc....
    Thanks for your help
    Hotxbun

    Is the drive shown properly in device manager?
    When you remove CD/DVD drive from the device manager after restart it should be recognized again. Can you use it after doing this?
    Have you tried to reinstall OS using Toshiba recovery CD/DVD?

  • Equium A210 - After BIOS update the DVD drive stopped working

    hi, since I have updated my BIOS recently, my DVD drive has stopped working on my Equium A210-1AS with Vista 32bit.
    I have tried Microsoft fixme program that does not work, upper and lower registry is not there ether in regedit.
    Has anyone got any solutions to get DVD drive working again?
    Thank you

    The CD/DVD was working fine before I was prompted by Toshiba tempro to update my BIOS, since then my CD/DVD drive doesnt work.
    Have tried fixme from Microsoft that doesnt work, have tried to delete upper/lower filters they are not there, have unistalled CD drive and restarted the drive re-installs and still does not reconise any CD/DVD to boot up and DVD drive disapears some times
    Any suggestions?
    Thanks

  • A205-S7464 DVD Drive doesnt read cds!

    I have a A205-S7464 Laptop. running windows vista home edition sp1. my dvd drive doesnt read any cds! i dont know whats wrong. Could it be a driver issue? does it need to be updated or is the drive defective all together? the drive shows up in windows explorer and in the hardware devices it says its working properly! the drive is HD TS-L802A ATA. Driver 6/21/2006 ver. 6.0.6001.18000.
    I just restored my system with the recovery disc. it read that fine. then i updated to vista sp1. didnt check if it read any cds before the update but doesnt read any cds now.... i think its a software issue the drive tries to read the cd but never actually reads it....
    Message Edited by Polski85 on 02-19-2009 08:52 PM

    Hi-
    Try downloading and installing the Patchburn Utility. It might help your media reading. I assume this is a disk that someone burned? Could be your drive doesn't like the media, itself, or the burn speed was too high for your 5x DVD=ROM to read.
    If Patchburn doesn't help, may be time to move up to a more modern drive to replace your antique.....
    There is a real nice,Pioneer DVR-112 replacement you might consider.
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

  • I synced my phone lastnight and now it says my phone cant connect to computer the Apple Mobile Device USB Driver doesnt work?!? i deleted itunes and reloaded still not working.... Does anyone know how to fix??? i just want to upgrade to IOS6

    Does anyone know why my Iphone will not connect to my computer all of a sudden? I backed it up lastnight. Now it wont even register with my computer.... It says Apple Mobile Device USB driver doesnt work all of a sudden???? i tryed deleting and reloading and nothing is working!!! someone please help =)

    Have you done:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    What results do you get when you run this:
    iTunes for Windows: Device Sync Tests
    Do both the Home button and Power button work OK normally?

  • Dvd drive not worked properly

     i have  hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action  till now .why u people do like this .i want explation and just change my  dvd drive that's all.

    tcrite,
    Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
    Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • My cd/dvd drive wont work what do i do ?

    i own a hp pavilion dm4 -3055dx. my cd/dvd drive wont work, what do i ? besides itunes freezes media player freezes. nero wont respond. how do resolve these ?

    Hello teperepc,
    Take a look at this page for trouleshooting your cd/dvd drive not working.   About those other programs - do they freeze every time you use them?  Do any other programs freeze, or just the audio/video stuff?
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?

    My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.

    Welcome to Apple Discussions!
    It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues.

  • External DVD drive not working with Lombard G3 333

    I have an external DVD drive that worked when I had 10.4, but had to reformat HD and now only have 10.3.9, and now the DVD drive does not work with DVDs, it will work with CDs and CDR media, but not with DVD media. My Lombard did not come with DVD originally and I am using a PC Card (Macintosh PowerBook DVD-Video PC Card For PowerBook G3 Series) and it worked before with 10.4, but not with 10.3, any ideas? Also have tried with 9.x, no go either. Any help would be appreciated.
    Also, would it be difficult to add a DVD logic board to my Lombard?
    Joey

    xamdu,
    I am reading and replying to this post after first replying to your other post, so a few of my previous comments are redundant.
    Regarding the FireWire(?) USB 2.0(?) DVD drive: It is possible Tiger supported your DVD drive but Panther does not. I would give PatchBurn for Panther a try:
    http://patchburn.de/download.html
    If the above is unsuccessful, take a look at this workaround:
    http://www.macosxhints.com/article.php?story=20040330171655882
    You can swap logic boards but it does require a lot of disassembly.
    Since no version of OSX supports Apple DVD Player, I am assuming you have a third-party player like VLC installed to watch movies. If this is the case, the DVD Decoder PC card is not necessary. If booted to 9.x, you of course will need the decoder PC card but I did not know 9.x's Apple DVD Player supported external drives.

  • My DVD Drive dosent work and its dented and i can't get my DVD out. I have apple care so would I be able to get it replaced?

    So I somehow dented my DVD drive for my macbook pro but I tried putting a disc if it would work (stupid idea) It went in but it now wont come out. I've been wanting to get to apple for a while about my DVD drive not working and now my DVD is stuck in there. I have apple care plan so would I be able to take my macbook into the store and get it replaced or parts of it replaced?

    Yes, if you are in warranty. Take it in, only Apple employees can speak for Apple ( we are users here, just like you).
    Barry

  • I am trying to get a usb 2.0 external dvd drive to work under the latest update to Yosemite. The Unit's name is LITE-ON DVDRWSOHW-1673S

    Greetings All
    I am trying to get a usb 2.0 external dvd drive to work under the latest update to Yosemite.
    The Unit's name is LITE-ON DVDRWSOHW-1673S.

    Applications/Utilities/Disk Utility - does the drive show there?
    Disk Utility – Force Mount Disk

  • I am trying to get a usb 2.0 external dvd drive to work under the latest update to Yosemite

    I am trying to get a usb 2.0 external dvd drive to work under the latest update to Yosemite. The Unit's name is LITE-ON DVDRWSOHW-1673S 

    Check the manufacturer website if the device is supported on Yosemite.
    If not, you can get a SuperDrive from Apple which can run on any OS X version.

  • My touchsmart iq500 series PC dvd drive stopped working. how do i fix it

    my touchsmart iq500 series PC dvd drive stopped working. how do i fix it

    Hi Kozi:
                Welcome to HP forum. You mean replacing this page will show you how to excess it and replace it. You still need to order a new one. Ounce you open it and remove it you will then have the part number to order a new one. I choose Touchsmart IQ503jp closeted number listed here in United States to your computers number. http://h1005.www1.hp.com/ewfrf/wc/document?docname=c01498907&cc=us&dlc=en&dlc=en&product=37718827&tm...

  • If itunes is installed the disk drive doesnt work

    ive recently got a new laptop but everytime i install itunes the disk drive doesnt work.
    when itunes is installed it doesnt recognise that i am putting disks in.
    its really annoying, im stuck with the same songs old songs on my ipod!
    if u culd culd help it would be much appreciated!

    i dont have itunes on my laptop at the moment so i have just been trying to install it again. but everytime i try it fails and doesnt finish the installation. it did this before and last time i did over 10 attempts until it worked, then wen it finally did install the disk drive stopped working. any advice? lol

  • Adding a new dvd/cdrw drive doesnt work on my SP 4600

    Hi, my laptop comes with a cd-rom drive as standard and i have purchased a dvd/cdrw drive to replace it. when i fit it it seems to be powered because i can open the cd drawer and the light comes on when i turn on the computer. however it is not coming up in my computer.
    i have tried several drives so the drive i am using is not faulty.
    can someone please help me with this as i need the dvd function on my laptop for my job.
    thanks alot
    Tommy

    Hi,
    I have been experiencing similar problems to you:(
    I have conducted extensive research and have discovered the following:
    There are two types of drive used on earlier Tosh laptops.
    These are M/S (master slave) drives and CSEL (cable select) drives. whilst the BIOS in later Tosh machines is able to recognise either type of drive:) the earlier machines can't:(
    On Genuine Toshiba drives there is a sticker that labels the ATAPI pin outs, and on this sticker pin 47 will be labelled either CSEL or M/S.
    Your replacement CD-rw/DVD drive must match the drive you are replacing in this respect or it will NOT be recognised.
    If your drive is not a tosh drive the chances are high that it is CSEL as most other manufacturers use this configuration.
    I am told that there is an internal mod that can be done to the drive to change this parameter but I have no info on this at present.
    I will update on the forum if I get any more info.
    Hope this helps you;)

Maybe you are looking for

  • Image quality question on WVC54GCA

    The contrast ratio on this camera image seems way too high.  i.e. the sunlit areas are too bright and the shadowed areas are too dark.  Does everyone notice this on this camera or is it just me? If there is a way to upload an image to this post... pl

  • Embedded graphics show as blank grey rectangles

    OS is Windows 8.1 x64. Since upgrading to Reader 11.0.10, PDFs opened in Reader that have graphics embedded in the pages just show blank grey rectangles where the graphics should be. There's nothing wrong with the PDFs, as when I open them with Mupdf

  • How do you switch the display of a Hierarchy to be collasped?

    I need to display a hierarchy in a web app, I need it to default to collapsed rather then expanded.   I am unable to find anything in the query designer properties to control this setting.  The one solution I've tried in the Web Template is to add th

  • WRT54G Problem - Web based setup not displaying

    Anyone else had a problem like this? I've used Mozilla and IE, but I don't actually get anything appearing aside from the basic page layout of the setup page after I log in. It loads and everything - IE says there's an error on page; but i get hardly

  • What is wrong with my adobe?

    The websites are not loading. When I click on the download link for photoshop for example I just see the basic adobe page and then just blank. Signing in is also slowed down. The page loads for  hours if I don´t double click and restart the loading.