My DVD drive has stopped working. Where are the drivers for HP GH60L?

My DVD/CD drive has stopped working.  Where are the drivers for HP GH60L?        HP Pavilion Elite  HPE-350T.   

Hi,
Please try the following first:
   http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • My dvd drive has stopped working... put disk in...spits it out! Can anyone help?

    My DVD drive has stopped working...put a disk in...spits it out. Can anyone help?

    If you have a mid 2010 iMac, it is not PPC.  PPC refers to pre-2006.
    The 2010 is getting close to the age the PRAM battery might go, so that could be at issue.
    The other issue is that the drive itself could only handle up to a certain speed DVD disc:
    http://support.apple.com/kb/SP588
    Slot-loading 8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
    Writes DVD+R DL and DVD-R DL discs at up to 4x speed
    Writes DVD-R and DVD+R discs at up to 8x speed
    Writes DVD-RW discs at up to 6x speed and DVD+RW discs at up to 8x speed
    Reads DVDs at up to 8x speed
    Writes CD-R discs at up to 24x speed
    Writes CD-RW discs at up to 16x speed
    Reads CDs at up to 24x speed
    If any are near the top end, that could explain it.
    Some copy-protected commercial DVDs that were recently released may have difficulty with Apple's drives.
    Some non-region discs may have difficulty if you are outside of the country region the disc was made.  Apple gives you several attempts to setup regions.
    If you or anyone else stuck an SD card in the CD drive by accident, it would spit out discs regardless of what kind you put in.  Good to try a commercial music CD you know worked before, or a commercial DVD you know worked before under 10.6.8.  
    I know for instance some Netflix DVDs won't read on my 10.9 installed iMac of the same age but will work on the 10.7 installed MacBook Pro that is newer.   And switching back to 10.6 on the same iMac doesn't make a difference.
    http://www.macsales.com/ offers external drives as well as internal replacement drives worldwide.
    Bluray is not compatible.
    Discs with sticky label may not work because they make the disc out of balance, and the sticky can get into the drive mechanism.
    Barring anything else, it could have gotten dust accumulated.  Bring it to the genius bar of an Apple Store if still baffled.

  • Upgraded itunes now my dvd drive has stopped working

    I recently updated itunes and now my dvd driver has stopped working. My computer won't even recognize my dvd drive. I have uninstalled and reinstalled and uninstalled itunes several times. I've tried system restore. I've even looked for an older version of itunes and no luck. I took it into Fry's electronics and they fixed it but when I hooked up my ipod it stopped working again. I don't know what to do. This is really frustrating and I am just tired of itunes messing with stuff and constatly crating new versions. I've read other threads and have tried some of the suggestions with the registration which didn't work.
    Can you please help me.

    You might get more help if you post your question in the correct forum.
    This is the 'iTunes for Mac' forum and I can see from your post that you actually have a PC.
    PC users will not really be reading this forum, which is the help you need.
    Try posting your question here :-
    http://discussions.apple.com/category.jspa?categoryID=150

  • My DVD drive has stopped working.

    My DVD drive has stopped working. Any suggestions?

    In what way stopped? Completely dead? Won't burn? ...?
    Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964
    If completely dead, buy a new one.

  • Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

    Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner.  Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop.   I can not find the driver on the HP support list and the support list does not recognize  HP LaserJet 5p.   
    Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

    Hi,
    Basic print drivers are available for the HP Laerjet 5P via Windows Update.
    Follow these steps to install the printer drivers on Windows 8.1:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where are the drivers for HP Stream 7 Tablet - 5701na???

    It appears that HP have pulled the drivers for the HP Stream 7 Tablet - 5701na.... I downloaded the wireless and BIOS a couple of days ago and stupidly didnt have them locally, now a couple of days later I return to the site and no drivers are listed for this model! Anyone know where I can get these drivers???  

    Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

  • Where are the drivers for micro ph

    my micro photo wont install on my computer says no drivers found the sofware is installed.if i could find the drivers on the disc maybe it would be quicker to locate the drivers i have been at this for 2 weeks

    Hi,
    Basic print drivers are available for the HP Laerjet 5P via Windows Update.
    Follow these steps to install the printer drivers on Windows 8.1:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Where are the drivers for dell all in one B2375dfw

    printer cuts off the wording at the top of each page, i have a mac1 osx system with a dell B2375dfw all in one printer

    Note, Mavericks is not a Classic operating system.  Classic refers to Apple's operating systems 13 years ago.    I've asked this thread be moved.  If the new Dell doesn't work, refer to this set of links for compatible printers:
    http://support.apple.com/kb/HT3669
    Apple provides updates to the printers on that link through these links by vendor:
    HP, Ricoh, Canon, Epson, Brother,Lexmark, Samsung, and Fuji/Xerox

  • Where are the drivers for the zen micro pho

    are they in the player itself or on theinstallation disc?my usb is looking for the device drivers but i cant find them. the computer wont recognize my micr photo without them? thanks for your help

    Hi,
    Basic print drivers are available for the HP Laerjet 5P via Windows Update.
    Follow these steps to install the printer drivers on Windows 8.1:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • CD/DVD drive has stopped being recognised by Satellite A100-01G

    I have a Satellite A100-01G but the CD/DVD drive has stopped being recognised by the machine.
    I have Vista ultimate as the O/S.
    Please help
    Thank you

    Hi
    Did you check in the device manager if the CD/DVD drive appears correctly?
    Please check this!!!
    As further action I would recommend removing the CD/DVD drive from the device manger a reboot the notebook.
    The Windows OS should recognize the new device (ODD) and should load the drivers again.
    Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    and reboot.
    Good luck

  • HI i have tried so many times to import images, both pictures and video from my hard drive to elements 131, and it keeps coming up with the error message " .....has stopped working we are looking for a solution to this problem etc " please help!

    After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found"  I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy

    From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
    •You MUST use an account with Administrator Privileges to run Premiere Elements
    •(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
    •What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
    •What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
    •Has this ever worked before?  If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.?  Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
    •Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
    •What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
    •If you are getting error message(s), what is the full text of the error message(s)?
    •What were you doing when the problem occurred?
    •What other software are you running?
    •Tell us about your computer hardware. How much RAM is installed?  How much free space is on your system (C:) drive?
    •How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
    And some other questions...
    •What are you editing, and does your video have an orange line over it BEFORE you do any work?
    •Which version of Quicktime do you have installed?
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

  • HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Have you tried one of those CD cleaning Discs yet?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • Equium A100: DVD/CD drive has stopped working code 22

    Toshiba Equium A100 on Vista operating.
    DVD/CD drive has stopped working and is showing as disabled. Have tried to re-enable but error code 22 returned. Can anyone help?

    Hi
    The Microsoft page provides these details about error code 22
    *This device is disabled. (Code 22)*
    _Recommended resolution_
    +Enable the device by using Device Manager.+
    +In Device Manager, click Action, and then click Enable Device. This starts the Enable Device wizard. Follow the instructions.+
    It looks like you have already tired this. Well, in your case I would recommend removing the CD/DVD drive from the device list in the device manager. Just simply mark the device an press delete.
    Then restart the notebook and check what happens.

  • Ever seen the error "ialmrnt5 display driver has stopped working normally"?

    Have a user who hasn't used E-test in about a year. He has version 8.01.0249 with IE 7.0 and is getting an error running a script: "Windows display driver stopped responding. The ialmrnt5 display driver has stopped working normally . . . .".
    On a different machine with E-test 7.0 with IE 7.0, the same script works fine.
    Should I have him upgrade to version 8.20.0526? Also, assuming I upgrade his version, why does the same script work with E-test 7.0?
    THANKS!

    Hi,
    It would be better to upgrade to version 8.20.0526. Prior to eTest Suite 8.20.x there was no support for IE 7. There were some cases where eTest Suite would work with IE 7, but it was not consistent since the product did not has IE 7 contemplated in the design. That can explain why it works with e-Test Suite 7.0.
    Additionally in 8.20.526 there are several additional features that makes the tasks easier, and there are several bug corrections that can save you time when troubleshooting scripts.
    If you are planning to use eTester for Load testing scripts I would recommend moving to 8.20.0569, which has additional bug fixes that can save you a call to support.
    You may want to contact your Empirix Sales Rep in order to know if your license would work with the latest version of e-Test Suite or just install it and try the license.
    Once you install e-Test Suite 8.20 make a quick test to see if it works with your web application, then, consider the alternative of upgrading all the other computers that will have eTest Suite. It's better to work in a consistent environment where everybody has the same version because you will ensure compatibility of scripts and configuration settings, it will be easier to maintain your environment, and it will be easier to troubleshoot computer problems since you should all have the same configuration.
    e-Test Suite 7.0 may not be supported since it's older than two releases than the current one, even if the script work with e-Test Suite 7.0 I would look for the upgrade.
    Regards,
    Zuriel

  • Hi, I have a HP pavilion dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working

    Hi I have a HP Pavilion Dv4 laptop computer. My E:\ CDDVDW TS-L633M cd drive has stopped working. When I insert a new CD or an exiting cd into the cd drive, the computer displays a message to insert a cd into the drive. i Know that the cd that I'm inserting into the drive should be readable, but the computer doesn't recognize it. When I run the HP support assistant, and choose the HP Optical Disc Drive Check, I get the message "Insert media in : E:\ hp CDDVDW TS-L633M
    If you want to do write testing, insert blank writeable media, Otherwise, read-only testing will be performed. When I insert a  disk with a program that I want to install on the computer into the cd drive and click the next button, I get a window that says:
    "Media Identification:
      Wait while the media is being Identified."
     Then another window is displayed with the message:
    "Media Identification
      No disc has been detected."
    But I know that the disk is formatted correctly for my cd reader to recognize it.
    Please Help,
      -Ron

    Hi Ron,
    First, try the automated fixit from Microsoft on the link below.
    Windows 7
    Vista
    Check if the drive is now working.
    If the drive is not working, click the Start Menu, open the Control Panel and click on Device Manager.  Next click to open DVD/CD-ROM Drives.  Right click the drive and select uninstall.  Do not delete drivers if asked.  When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ).  Let windows reinstall the drive and see if it now works.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for