My DVD drive is now not recognized in boot camp.

I just found the Matshita DVD-R UJ-898 is no longer recognized in Boot Camp Win 7. Tried uninstalling in Device Manager but the driver fails to load upon restart and also fails when trying to update. The DVD drive works fine in OSX Lion so I know the drive is ok. It worked fine when I first installed Windows 7 in Boot camp last year. This is an early 2011 macbook Pro 17 with Lion. All updates have been installed. Hadn't used the drive in Win 7 for a long time so not sure when it ceased to work.

Found the solution. Microsoft Fix-It found and made the driver repairs automatically.

Similar Messages

Windows .iso 7 will not load Boot Camp. The disk is not recognized by Boot Camp.

Boot Camp also does not reconize XP on disk but, guess that the new version of Maverick does not support it. If anyone knows otherwise please post.

You should visit the Boot Camp forum and read the Boot Camp help manuals.
https://discussions.apple.com/community/windows_software/boot_camp
http://www.apple.com/support/bootcamp/

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8

Recently, iTunes upgraded. My 7th generation iPod is now not recognized and I cannot sync. The troubleshooting talks about being visible in Windows (iPod is invisible) No other options and nothing about windows 8

I have had similar issues with mine, happens mainly if I transfer songs and then decide to disconnect my iPod to listen to them with my IEMs (I use Interenet Explorer in my case and it is not neccessarely up when this happens, so I seriously doubt it is an issue conencted to the web browser). I have no patience for this so my trick is I try to eject it from iTunes, if that does not work, then I bring Windows explorer up, right mouse click on the iPod mounted drive and select Eject. It gives me the same warning but there is a third button selection called Continue. When I choose that it just disconnets the drive anyway and the iPod is finally disconnected. It seems to work each and every time I do it so this solution is fine for me. Would be intersting to see what the real root cause of this is because I started getting this problem with the newer iTunes 11.

HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries

Does the new iMac coming in December have a dvd drive? If not can you use the Apple USB SuperDrive?

Does the new iMac coming in December have a dvd drive? If not can you use the Apple USB SuperDrive?

The soon to be released new iMacs don't have a DVD drive. I don't believe that Apple have updated their site to say their USB drive will work, but the expectation is that it will.
I watched the keynote and when Phil Schiller was presenting the new models I think he mentioned something about it working and he had one on the desk next to the iMac.
I'm going to check the keynote if it's still up and I'll update my post if I'm wrong.

"Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

Thanks for your feedbakc Kiranjj!
I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Mouse not working with Boot Camp after 10.5.7 update

I upgraded to 10.5.7 recently, and now my mouse doesn't work on Boot Camp. It doesn't seem to register, and I can't move the pointer. I tried this with two mice that worked just fine on the Mac OSX side. Any ideas? Has anybody else noticed this?

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

I started Boot Camp on a MAC mini but then had a power failure after 30 secs :( Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk Can I recover?

I started Boot Camp on a MAC mini but then had a power failure after 30 secs Now when I start Boot Camp the option to install Windows 7 is gone. In it's place is Remove Windows 7. It seems to hang at Partitioning disk How can I recover?

Welcome to the Apple Support Communities
That's because the Boot Camp volume was created, but your Mac hasn't been set up to start automatically from the Windows disc. Insert the Windows DVD and press C key while your Mac is starting to start Windows installation.
If you want to make sure that everything is correct, open Boot Camp Assistant and choose the option to remove Windows 7. Then, open that application again, select the option to install Windows 7 and you will be able to install Windows as usual

I have deleted windows7 in the boot camp but the partition macintosh hd2 is still there...if i try to install windows7 again,it is not showing the boot camp partioned space...

I have deleted windows7 in the boot camp but the partition macintosh hd2 is still there...if i try to install windows7 again,it is not showing the boot camp partioned space...

Update: I did an extended hardware test (just in case a hardware issue was causing my problem)--no problems found. I then went through the Aperture troubleshooting steps: I tried repairing permissions first, but I still could not see any of the images that were in the Aperture trash. I then repaired the library. This seems to have fixed things (at least upon initial assessment). Afterward, I was able to see the images that were in the trash. I opened the Activity Window to see what it said when I tried emptying the trash again. This time it said it was deleting exactly the number of images that I expected it to delete (not twice as many this time!), and it emptied lickety split--as I had expected it to do the first time! So, hopefully, all is now well with my system and library. Still wondering why it was telling me it was deleting twice as many images as were in the trash the last time I tried, but overall, much happier today!

My DVD drive is no longer recognized.

For the past few months my dvd drive would not open when I used the eject disk function. A few times I went into the startup menu and ejected the disk manually. Now the dvd drive is not even recognized by the computer. This dvd drive is the original and my G5 is at least 5-6 years old. Should I replace the dvd drive or is this a software issue?

Hi birdman1999, and a warm welcome to the forums!
It is very likely it is gone, I've not had an Optical in the last 8 years that lasted that long myself.
Does it not show up even in Disk Utility or System Profiler?
Does it boot off the Install Disc if inserted and holding the c key at bootup?
Here's some options for replacement...
http://eshop.macsales.com/staticpages/Framework.cfm?page=superdrive/sdl_powermacg5.html

[G575] CD/DVD drive disappeared - no longer recognized in Windows

I have a Lenovo G575 that I have had for a couple of years now. Within the past week the CD/DVD drive has disappeared. If I go to device manager it is not listed. I went through the regedit and tried to delete all the upper/lower filters in the registry and no change. I can insert a disc and it will spin and I can here it running but it won't recognize that there is a disc in the drive. Is there any way I can just reload the driver? And if so where can I find just a driver? I have gone to a couple of sites but haven't been able to just find a CD/DVD driver.
Any and all help is greatly appreciated.
Moderator comment: Subject edited for clarity.

Hi Kechrmi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the CD/DVD driver is not detected in the device manager in your G575 Laptop, I suggest you to check of the CD/DVD is detected in BIOS. To access the BIOS menu press F2 when the Lenovo logo appears on the screen while the computer is starting up.
And to conform the issue, please perform OKR (One Key Recovery) using the OKR button located beside the power button.
NOTE: Please backup the data in the computer before performing OKR, as the data will be completely erased.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

External hard drive clicking and not recognized by mac will DiskWarrior work?

First of all apologizes if I've posted in the wrong community I couldn't find one that really fit my particular query.
I'll give a quick rundown of what happened and see if anyone can help or suggest a course of action. My Seagate External HDD model SRD0SP0 was mounted to my 2013 MacBook Air when it started to make a loud noise freezing the computer and requiring me to force shutdown the entire system. I immediately rebooted the computer and it started up again fine but when I tried plugging in the drive to the USB it would only spin and beep at regular intervals and then go quite. The drive did not mount to the desktop but I could see it in DiskUtility although the 'verify' and 'repair' options were greyed out. I tried to connect to a PC but it would not recognize the drive either. I left the drive alone for a few months and now when I plug it in it starts to fire up with the whirl sound but that is quickly followed by 5 faint ticks followed by a louder click. It almost sounds like something is dragging and the click is it coming to an end before starting up again. (I have a .m4a recording of the this but I don't see an option to upload) This goes on for about 20 seconds and then a window pops up saying something along the lines of 'this disk is not recognized by this computer' and the options to 'initialize' 'ignore' or 'eject'. I have only ever clicked eject. As before the drive is visible in DiskUtility but the options are greyed out.
I contacted a data recovery agency and their response was:
I would recommend to remove bare drive from the External casing and connect it to a computer directly or via another USB enclosure. If the drive is internally fine you should be able to see and copy the files. If you still get the same symptoms then your clicking hard drive most likely has internal problem with read/write heads and needs head assembly swapped from a donor. It's a very serious problem and recovery procedure in this case requires a lot of experience, use of class 100 clean room and specialized equipment.
If stored files are not particularly important you should replace the hard drive. If you need data from the drive we could recover it for $950 USD.
At this time I am not comfortable taking my drive apart and I can not afford close to 1k in repair costs. From my research on this forum I have seem multiple suggestions to try DiskWarrior but I am not sure that it will work with the problems that I am describing. Before I spend the money has anyone had a similar problem and had success recovering their data via DiskWarrior? Or do I have to resort to the data recovery agency or the freezer technique?

If the drive is making clicking sounds then it will probably fail. That's evidence of a mechanical issue. DW isn''t going to fix that nor will Disk Utility. Only replacing it with a new drive will fix it. While you can you should make a backup.

Drives burning, but not recognizing burned disk

I've been burning some DVD disks lately, to make room on my hard drive. When I burn the disks (I am using the system software) they show up on my desktop, and are searchable... as long as I don't eject them. once I eject the disk and reinsert it, it shows up as a blank CD. FYI- I'm using burn folders, and I can see that the disk has been written on. Oddly, this happened to both drives at the same time, so I don't think it's a hardware issue. A re-start did not resolve the issue.
Any advice would be greatly appreciated.
Bruce

Unfortunately i have no advice, but i am having the same issue... perhaps.
Just recently i've had DVD player report that a couple of DVD's were the wrong region, though both drive and discs were region 1. I have an old external DVD drive and they played fine from that.
Then i tried to mount an archival disk written a few months ago and it read as blank. The external drive also read that. I wrote new copies of the archive, one with Toast and one with Disk Utility.
Both wrote, verified, and mounted on the desktop, but as soon as they had been ejected and put back in, the OS reported i had inserted "a blank DVD".
Until i read that you had the problem on two drives, i assumed it must be hardware.
It now seems that anything i write with the built-in drive exhibits the same behavior.
!http://img228.imageshack.us/img228/5186/scottdartve1.png!

My DVD drive is now not recognized in boot camp.

Similar Messages

Maybe you are looking for