My dvd drive wont read (or even accept the existense of cds) much less burn them. HEEELLLLPPP

my dvd drive wont do alot of the things it is supposed to like burn cds, or even recognize them, also when I went to my profiler it says the drive doesnt exist. as far as I know the model is an MATSHITA DVD R UJ 875. my computer will still read dvds, but if there is a cd inserted, then it makes some aggrivating noises and then spits it out, I know little to nothing about SERIOUS computer work, like firmware patches, or bridges or whatever the terms are. When I try to burn anything, it cycles almost burns, but then, like clockwork. the error messafe pops up that there is an un expected error. I am at my witts end here is there any thing I can do to fix this problem, without spending money I really dont have right now? (I am going to school and it starts this thursdaty) or should I just get my SKS out and fix the problem with a Full metal jacket? someone help. if need be my email is [email protected] Please help me if you can.
Thanks all

Try resetting PRAM…
http://docs.info.apple.com/article.html?artnum=2238
At times it helps with optical drive issues.

Similar Messages

Trying to upgrade from leopard to snow leopard.. my dvd drive wont read my disks, yet it plays music cds and movie dvd's...help!!

I just purchased snow leopard and I evenually want to upgrade to lion.. I have to put snow leopard on first in order to do that. I currently have leopard. I try to run my disks and they wont read, my DVD drive makes a ugly noise when it tries to read them.. I tried my original installation disk and it does the same thing. But when I put in a regular movie DVD or a music CD it plays them fine without problems. I called customer support, and they suggested I take it to a apple tecnician... cant really afford that right now....has this issue happened to anyone???? any suggestions???? HELP!!!

hi there angel..may i know did u find out what was the problem and how did u fix it? much thanks.

Dvd drive wont read discs; want to use a .dmg to play Prey

My dvd drive is shot, just like everyone else in this freakin forum. The tricky part is im in afghanistan, yay.. so i cant call apple and get it replaced, so i want to use a .dmg that i made from a friends macbook to play the game Prey cause i can't use the disc, but when i mount it and click on the application it says insert the disc or press quit. what am i doing wrong?

It doesn't sound like you're doing anything wrong. Many games require that you have the DVD inserted to play. This prevents someone from making copies (or images) and using them on other machines (pretty much exactly what you're trying to do). While you have a legit issue, far more often, people would make copies for their friends to use without them purchasing the game. It is becoming more common for companies to use other types of DRM which do not require the original media to be used... but many of these options end up in up-roars from consumers as well. If you do in-fact own the game, there are options for removing the requirement that the CD/DVD be inserted in order to play. You can do a search using whatever search engine is available to you to get some options.

I bought the Snow Leopard Update but now my macbook wont even accept the DVD and keeps ejecting it. This is the same for all DVDs.

I have a very old (refurbished, bought over 4 years ago) macbook pro 15". It's been running ok on OS X 10.5.8 until very recently. It started ejecting disks, and then the new adobe flash player update wouldn't work. Lots of other little things have been happening as well.
I had been considering buying a new macbook, but one of the Apple store people suggested I update instead (a much cheaper alternative!). So I bought Snow Leopard, and it arrived in the post today. But now my macbook wont even accept the dvd. It takes it in, whirs and complains a bit (for less than 60 seconds) then ejects it again. I have tried cleaning the disk, cleaning the disk area with a credit card + lens cleaner (a trick I saw recommended on this forum). But no luck.
Any advice?
I am a trainee teacher and actually will be gutted to have to get a new laptop (as I really cant afford it). BUT obviously if I have to I will. I just need to extend the life of this one for as long as possible, until I have more money to get a better one!

Bring your MBP to an Apple store genius bar and see what they say about your MBP optical drive.
Look on the OWC web site. They sell optical drives for older MBPs. Perhaps there is one that will fit yours. Installing one is not brain surgery.
Otherwise examine the iFixit.com and Powerbookmedic.com web sites for replacements.
Ciao.

Drive wont read any disc

Model: HPE-030sc
My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc.
When I push the F drive in my computer, it just says program could't be fund.
Anybody who can help.

Alfster76 wrote: Model: HPE-030sc My dvd/cd drive doesn't work. I've tried to reinstal throw device manager. But the drive wont read any disc. When I push the F drive in my computer, it just says program could't be fund. Anybody who can help.
Hello Alfster76, Did you uninstall the DVD drive in the Control Panel, Device Manager, then reboot the system and see if it finds new hardware and installs the drivers for it?
Sometimes this works. If not, you might check the data and the power cables going to the DVD drive, just to insure they are properly connected.
If this does not resolve the issue, the DVD drive may have become faulty.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

MacBook Pro 17"... JUST REPAIRED VIA APPLE STORE ...CD/DVD Drive wont mount disks

Macbook Pro (17") wouldn't boot to desktop/homescreen, so I went to Apple.
They sent me to Micro Center for data recovery. Success.
After that, back to Apple then they sent me to Best Buy for new Hard Drive. Success.
Back to Apple. Everything working ok except that my Adobe Creative Suite programs no longer work.
So I try to reinstall via data CD, as I did when I originally installed the programs, but now my CD/DVD drive wont mount ANY disks!
It accepts them, makes some odd noises, then spits back out. Please help!

I'm confused, why did Apple 'send' you to 2 non Apple places for repairs? Did you buy the product from Best Buy? It doesn't seem like Apple made any repairs, so you'll have to get either Micro Center or Best Buy to repair the issue for you.
How long ago were these repairs?

My cd/dvd drive wont work what do i do ?

i own a hp pavilion dm4 -3055dx. my cd/dvd drive wont work, what do i ? besides itunes freezes media player freezes. nero wont respond. how do resolve these ?

Hello teperepc,
Take a look at this page for trouleshooting your cd/dvd drive not working. About those other programs - do they freeze every time you use them? Do any other programs freeze, or just the audio/video stuff?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

della wrote:
My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
It's probable that the CD 'side' of the combo drive has failed. That you cannot boot from the recovery CD is pretty much proof of the failure.

A205-S7464 DVD Drive doesnt read cds!

I have a A205-S7464 Laptop. running windows vista home edition sp1. my dvd drive doesnt read any cds! i dont know whats wrong. Could it be a driver issue? does it need to be updated or is the drive defective all together? the drive shows up in windows explorer and in the hardware devices it says its working properly! the drive is HD TS-L802A ATA. Driver 6/21/2006 ver. 6.0.6001.18000.
I just restored my system with the recovery disc. it read that fine. then i updated to vista sp1. didnt check if it read any cds before the update but doesnt read any cds now.... i think its a software issue the drive tries to read the cd but never actually reads it....
Message Edited by Polski85 on 02-19-2009 08:52 PM

Hi-
Try downloading and installing the Patchburn Utility. It might help your media reading. I assume this is a disk that someone burned? Could be your drive doesn't like the media, itself, or the burn speed was too high for your 5x DVD=ROM to read.
If Patchburn doesn't help, may be time to move up to a more modern drive to replace your antique.....
There is a real nice,Pioneer DVR-112 replacement you might consider.
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, 300gbSATA+160gbATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, ExtHD 160gb x2, 23"Cinema Display, Ratoc USB2.0, Nikon Coolscan

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
I tried to reinstall driver.
I downloaded new codec
I tried Microsoft FIX IT
Nothing worked.
Need some help.
Thank you!!
Paul

Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
Hope this helps you.
Robert

Help! My DVD drive wont work when i install iTunes....

I Installed iTunes when i bought my iPod, but my Disc drive wont read any cd's when iTunes is installed. I uninstalled iTunes 4 times now and every time i uninstall iTunes amizingly my disc drive works again.
When iTunes is re-installed it wont read any discs, music cd's movies programs or picture cd's.
Im contemplating returning my iPod for a Zune but i really dont want to have to do that, i love my iPod...
please if anyone can help id really appritiate it...

I typed "install itunes, drive won't work" into the search bar in Apple support and found this:
http://support.apple.com/kb/TS2308

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

IMAC spits out cd/dvd and wont read

my IMAC keeps spitting out cd/dvd and wont read them any answers

Zap the PRAM and Reset the SMC, then try again.

D drive wont read my CS2 disc

My D drive wont read mt Cs2 disc. It says there is no disc in the drive, but ive tried it on other comps and it works. I tried burning the disc and that didnt work and i have no ext hard drive. anything suggestions?

Assuming the cd you burned was intended as a backup of your original Adobe CS2 disc, perhaps you didn't finalize it when you burned it. Use the original disc instead. If you don't have an original disc, you might consider that this forum is sponsored by Adobe.

DVD drive not reading after Flip4Mac install

My DVD drive was reading commercial movie DVDs just fine until I installed the Flip4Mac new version. I uninstalled Flip4Mac but it did not resolve the problem. OSX.8.2 Any suggestions?

You can try resetting the SMC and pram. If that doesn't help you can try a cleaning disc, your lens might be dirty. I doubt very seriousley that installing Flip4Mac had anything to do with it. Slot loading SuperDrives aren't the heartiest animals around.
To resettle SMC
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables with a battery you don't remove
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My dvd drive wont read (or even accept the existense of cds) much less burn them. HEEELLLLPPP

Similar Messages

Maybe you are looking for