My DVD I created won't play on my Mac

It says that this disc is not supported? It's the computer I made the DVD with? And an apple DVD

Hi
Not so unusual. Even so Your DVD might play on a set-top DVD-player.
There are some things that can give this:
• To high burn speed - iDVD prior to iDVD08 can only set burn speed to that
signaled by the specific DVD disc. eg x16 => x16 burn speed
in iDVD 5 and 6 - Save as a DiskImage (under File menu) and burn this with Apple
Disk Util tool (or Roxio Toast™)and *at x1 speed*
Higher speed = more burn errors = fewer player can compensate to this esp. Macs.
• Cheep brands - I only use Verbatim
• Type of DVDs - I only use DVD-R - no DVD+r or +/-RW
• low free space on internal (start-up) hard disk also confuses iDVD to do a bad job
My minimum is 25Gb after material is imported and structured in iDVD.
Yours Bengt W

Similar Messages

Dvd I burned won't play in friends mac...

Why does a slideshow that I burned a dvd of plays fine in my new macbook pro but not in my friend's older macbook?

Hi
Most common origin to this is
• brand of DVD e.g. Memorex, Noname and other Cheap brands usually do not work for Video - I only use Verbatim (More organic dye in these)
• type of DVD used - DVD-R plays on more and older players as DVD+R and +/-RW is known trouble makers
• burn speed - I set it down to x4 = less burn errors = Plays on more devices
Yours Bengt W

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on the Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

On my Mac (vers 10.7.5) I use Disk Utilites to burn a DVD. The DVD won't play on my Mac but will play on my Windows PC and on a DVD player. A DVD created on my PC will play on the Mac. Any ideas why this is happening?

I used iDVD to create an IMG file
You created the video DVD, the IMG file, with iDVD and just burned it with Disk Utility. As Klaus1 pointed out Disk Utility can't create video DVDs.
OT

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

Updated OSX - DVD-R's won't play now

A few weeks ago, I updated to 10.3.8, then 10.3.9, and now DVD-R's won't play anymore. The drive doesn't recognize them. These are DVD's that played fine before, in fact some of them are DVD's that I burned on this machine.

Edit, it is impossible to update 10.3.9 online to 10.4.9.
Only 10.4 up to date, 10.4 on CDs (which can be gotten from the media exchange program if you have 10.4 on DVD), 10.4 on DVD would bring you to a 10.4.9 updater compatible 10.4. Since you initially had 10.3.8 according to your initial post, something doesn't jibe about what you are saying. Where did you get 10.4 to update your 10.3.8 or 10.3.9?
Also if your machine came with 10.3, what happened to the 10.3 installer DVD that came with it?

Downloaded tv show from itunes and it won't play on my mac, just a black screen

downloaded tv show from itunes and it won't play on my mac, just a black screen

Did you burn the CD as an audio CD?
If not, that's your problem. Otherwise, without more details I can only guess. You might try a different brand of disk, or if you're using CD-RW try CD-R.
Regards.

The DVD I burned won't play on my DVD player

I filmed my son playing a concert on my iPhone. It is about an hour long. I was able to make it into a quick time movie. I figured out how to bun it on to a DVD throught Finder, but the DVD won't play on my DVD player or the Mac DVD player. What am I doing wrong?

Did you use iDVD to create the video DVD for playing?
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

All of a sudden my burnt cds from my macbook pro won't play in my Mac but will play in a PC or a DVD player! Itunes

all of a sudden when I burn cds on my Mac they won't play & tost titanium & Itunes reading them as blanks, but the cds will play in a PC or a DVD player. For some reason Mac not reading the discs. Even hooked up an external burner & cleaned the drive to no avail, weird, was wondering if anyone had a solution to my problem?

Noodledood2 wrote:
i also am curious how i can create a bootable drive from windows that i can boot mac os mountain lion from. How do i go about downloading Mountain lion onto my windows partition so i can create a bootable drive?...
You can't boot OS X with a Windows boot device.
Internet Recovery is the next step. Follow ssls6's advice.

DVDs made in iDVD won't play on a Mac

I've made a fair share of dvds from DVDSP and iDVD (version 7.0.4) but a few days ago I tried playing one that was created in iDVD on my computer (in the same drive that burned it) and it wouldn't recognize the disc. I tried several other dvds and they're spit back out too (all of them play fine on a standard dvd player). At this point, none of the dvds I've made from iDVD will play on my computer, while the dvds made from DVDSP seem to play just fine.
It seems odd that a dvd won't play on the very same drive that burned it. Does Apple do this intentionally? I need to copy one of the discs, but that won't happen until the computer recognizes it. Is there a workaround?

Thanks for the help. I looked into all these possible issues:
The drive itself works fine. Tested about 15 "homemade" discs and they all played normally.
I don't think it's the DVD brand. The at-fault dvds are Panasonic but my other Panasonic-burned dvds work okay. And they're all DVD-Rs.
I have 30g of hard disk space.
I checked the burn speed and it is set at the default ("Maximum Possible"). I've used this setting on my other DVDs which play fine, but maybe it could be the culprit?
The only other issue I could figure out is that the DVDs that won't play all have the same iDVD menu template. Perhaps there is a glitch with that menu?

DVD from PE9 won't play in computer let alone another DVD player

I produced a 7 minute video in HD. I can play it on my computer either as HD or at standard res from files produced via the "Computer:Export files..." on the Share menu. I need to produce a standard NTSC DVD and when I burn using the "Disc: Burn DVD..." I get a message that the burn has been completed successfully. Yet the DVD will not play on my computer if I reinsert in in the same drive I just used to burn it, and won't play in a regular DVD player either. The computer doesn't even see the disc if I search for it. I've read a lot of stuff about DVD-Rs and booktypes and bitsetting but this doesn't seem to apply here since the computer can't read its own disc. Burning a copy of the files burned to folders doesn't work either. The DVD burner burns everything else just fine. I am using DVD+Rs. Would it make any difference if I used DVD-Rs? Or is there anything else anyone can suggest? I am using Windows 7 Professional. Thanks.

>burning to a folder
If you are able to write (not burn) the folder structure to your hard drive, you may use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc
Put a commercial DVD in your drive and take a look with Windows Explorer to see the folder structure and the types of files... and make sure what you write to a folder from PE is similar

I downloaded a movie with Quicktime 7 Pro onto a DVD, but it won't play in my DVD player.

I downloaded a movie from the internet using Quicktime 7 Pro. I put it on a DVD so that I could watch it on my television. The disc isn't recognized and won't play on my DVD player. What can I do to get it to play?

In addition to what Gary listed - VisualHub (direct download). If you have issues with the direct download, you can obtain VisualHub directly from this site - http://www.wyodor.net/MoreEmbed/embedmedia.html

DVD main track won't play on standalone DVD players

Hi!
I have a problem and I was wondering if anybody could help me here.
So, i got a DVD which I had to reauthor so I demuxed the disc with bbdemux and got an m2v and an audio file. I could import both files to DVDSP without using compressor. Than I added a first play track which is 20seconds long and after it goes to the menu. The menu has a main play button and a button to the track selection menu. I added the demuxed files to a second track, created the chapters, linked all the buttons, defined everything about the dvd. Then I built it and then burned it. It was all working in DVD Player and VLC, then I tried in my standalone DVD player and everything worked just like I wanted until I pushed the play button in the menu and it kind of blocked, it showed me the first frame of the chapter and it stopped. Nothing happened but the timer on the DVD player was counting. I tought I might have f*d up the bitrates, so I lowered them, no difference. Then I deleted the first track, left only the menu 'cause I tought it was "confusing" him. No, then I deleted all the menus and burned the disc only with the main track but no luck... I know it has to do something with the track files but what??? I have a JVC DVD player and it always played every dvd 'till now... I don't know what's the problem... Please help! So, it kind of freezes on the start of every chapter.

so I demuxed the disc with bbdemux
You can try MPEG Streamclip to extract the original encoded files from the DVD. Probably the other demuxer did something to the original tracks.
Hope that helps !
Alberto

DVD from iDVD won't play on DVD player

I have made a movie in iMovie with pictures and videos from a vacation. When I was finished in iMovie, I exported the movie to iDVD.
In iDVD I made a menu for my DVD.
I used a Memorex DVD-R disc to burn my DVD on, but I now have a problem. The burned DVD will only play on computers (Macs and Windows), not on regular DVD players. When I try to play the DVD on a regular DVD player, the TV just displays an error message.
Does somebody know what's wrong?

It sounds like a burn error-rate problem. Unfortunately, iDVD doesn't directly give you the option to burn a disc at a low burn rate to greatly reduce such errors.
What you must do is a two step process:
Step one. 'Burn' a disk image of the completed project to your hard drive - it's an option under FILE. After the disk image is complete, double-click on the disk image icon to mount it on your Desktop and use Apple's DVD Player application to view the image to make sure it plays correctly (File>Open DVD media).
Step two. Use Apple's Disk Utility application or Roxio's Toast Titanium to burn the disk image to writable media. Use a low burn rate - no higher than 4x, but I like to use 2x. See Burning a disk image file on a CD or DVD in Mac OS X at http://docs.info.apple.com/article.html?artnum=93006
Also, Memorex may not be the best media choice. Verbatum seems to have a good reputation and I like Maxell.

Internal DVD - swapped harddrives - won't play normally

And this is probably my fault - but here we go:-
I just obtained a iMac DV 400 ( OS10.1 as I had to erase the HD for the person who gave it to me to make sure none of her stuff was left on it)) - internal DVD ROM verified in profiler - but I thought I'd swap a 40GB harddrive (from an Indigo 500 CD-ROM) onto the new Imac DV so my 13 yr old daughter could keep her files and creations etc - as well as her 10.3.9 which came on the Indigo 500CD-ROM when we purchased it - AND still play DVD's.
Now when I originally inserted a DVD - "Five children & It" - onto the iMac DV withit's original !OGB HD the DVD app. came up and played the DVD most admirably.
Now after the swap - when I inserted the DVD I just got contents window - so I copied the DVD player app from the original 10GB HD, and transferred a copy, via THUMBDRIVE, to the IMac's now 40GB HD, and stillonly got a contents window.
But if I pressed on one of the items in the contents window, the DVD actualy ran - albeit slightly jerkily.
But it's not the perfect solution - what am I missing to make the DVD player work properly when I load a DVD.
OH another clue - when I double clicked the transferred DVD Player icon on the newly implanted 40GB - it would sort of leap up as oif it were going to do something but then nothing came of it - the app didn't run.
HOpe I've given you all enough info to start with.
ciao
Gregg
PS good to see some familiar faces on this area of the discussions forum.

Hi Don - thanks for your input. Yeah - I notices the VLC software alrady in my application folder and did try it - but I had to go up a notch in version.
Anyway - before I got any response I just re-swapped (is that a word) the harddrives and it all went fine - I'll jsut transfer her stuff by thumbdrive, which I should have done in the first place but I wanted to put in larger capacity HD. Never mind - 10 GB will do for now. I'll bring that machine up to Jaguar 10.2.8 then soon to Panther ( when I go get a copy from a mac dealer who happens to have a few left- here in Perth Australia that is).
Now I'll go post a new question - I'm haven't got GarageBand and I don't even know if one can use it to splice two tracks together or even make an mp3 out of part of a musical track and 'manipulate it in some way - so I'll be looking for a 'free' software that can do that if I can find one.
Thanks again for your participation - it's always good when people offer a few wrokarounds even if they don't know the 'perfect' answer.
ciao
Gregg :

My DVD I created won't play on my Mac

Similar Messages

Maybe you are looking for