My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.
Similar Messages
-
I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR? The Apple store is a two hundred mile one way trip.
I didn't imply anything; I simply explained the terms of the ToU here because you had not specified what you were trying to do. Most such related questions are about copying protected content and I would not appreciate having my post removed with the obligatory email from Apple because I violated the ToU. In any case, you can find dozens of threads googling (or here) about the newer burners being slow copying content if it is protected. FWIW, if the DVD was produced by a commercial outfit, they may have used some sort of protection or an unusual file format - that problem has been discussed here previously.
As for your slow burner - since we don't even know what type of Mac/model/year/OS you have, it is impossible to guess. If it's an iMac, those vertically installed burners are known to be less than perfect; the horizontally installed versions are better, but still not as good as an external. I've used an external burner for years.
As for the conversion time: the burner should have nothing to do with that; it is your software and your Mac's processor and amount of RAM that matter for conversions and rendering. I have no idea what you are using to burn the DVD. And, as a last consideration: you should always burn your content at a slow speed so you can avoid burn errors and have better results.
Good luck. -
I can not buy the gem in the "clash of clans" game, It says "My purchase could not be completed". How I can solved this problem?
If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?
mostafa182 wrote:
... how I can solve this problem?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
when ı update firefox 7 to 8 I can not enter the facebook site, when I try it, it says Uyumsuz bir internet tarayıcısı kullanıyorsun. ( it means in english : you are using an unsuportted web browser) how I can solve this problem?
Step by step, how did you arrive at seeing this agreement?
-
I authorized my home sharing on my itunes for mac to share to my itunes on windows PC, but for some reason my music isn't fully sharing/syncing. Does anyone know how I can solve this problem?
Hi, Dave.
If you're using the BlackBerry browser, you can't configure anything to bypass the RIM servers. I believe you may do so by using the Opera browser, but I haven't tried it myself so cannot comment with authority.
I hope that clears up the issue for you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
I have a problem .. I can not download and update some applications from App Store as it asked me for apple ID I don't know this email.. How I can solve thi problem
All content from iTunes is tied to the account that downloaded it, so the id that shows when trying to download updates should be the account that 'owns' that app. Do you recognise the id that is showing e.g. has anybody else downloaded or synced content to your iPad ?
-
I created a book at the Ibooks author. But there are some pages which the number of page is not visible. What can I do to see the number of the page?
Have you changed the template?
Some pages may not have numbers in place as default. If you have changed the page or the template page, you may have added a object which as pushed the number out of view, or an image may be in a layer on top of the text.
If you select one object on the page...then go to Edit, select all, you should see the outlines of any content no matter that content may not be seen. Look at the bottom for a page width rectangle outline.. IF its there, you need to shuffle the content until you find that box, and use Arrange > bring to front. -
HElp
Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees. -
Email will not let me change fonts all of a sudden.
Email will not let me change fonts all of a sudden. It says I don't have the neccesay permissions in ~/library/preferences. this has just happened recently.
Who is your email provider?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
If yes, try deleting the mail account and adding it again. -
HT1918 will not let me change my security questions
I just put my itunes on my laptop and it will not let me change my security questions. When I try to change the questions, it says save and change, but it does not save my changes. Please help, because now I am locked out of purchasing anything from itunes. Thanks.
Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(95491) -
hi, i have a macbook and have been trying to play a dvd disk i have with some movies on them. well besically they wont play as theyre AVI files, does anyone know how i can solve this problem?
You can download and install MPlayerX free from Apple App Store. Works great for AVI and other movie formats. I had issues with some AVI's and MPlayerX resolved them.
-
I have just upgraded to windows 8.1 but my photoshop elements 11 now will not let me change the paper size and type in the print properties. Also some of the property popup boxes just flash on the screen but do not stay displayed!
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
The D7100 requires Camera Raw 6.5 which is compatible with CS5.
In CS5, click Help > Updates to update Camera Raw to 6.7 and you'll be able to open and edit Raw D7100 NEF files. -
I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?
This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair.
Maybe you are looking for
-
Canon mini Disk camera doesn't work if external drive connected
A long story. Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each). I've been using a C
-
HT1528 How can I change administer on user accounts without a password?
I am the sole user of my computer and do have a username and password, but somehow was unselected as an administrator. Without being selected as the administrator, I am unable to make necessary changes. How can I correct this?
-
ALL, I have a problem in URL of images in CSS. in the CSS, URL for the images. so we have checked-in the content server. we have given the url path in the css. URL would would look */idc/groups/public/documents/cp_images/imagename.gif*. offcource I h
-
Hi All, I am new to CE and trying to crete an EJB project. I am following the below tutorial. http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b030e7fb-2662-2b10-0dab-c4aa52c3550b?quicklink=index&overridelayout=true I have configure
-
I'm having some problems with contiguous sync in Logic Pro, just need to know if the capture file in Final Cut is a DV file as oppossed to the Quicktime file produced when using export? Keith Moore