My dvd player won't work anymore since my last update !!!

Hi , i have made a full update and since my dvd player wont recognize the disc and play them , please help.
thanks

And exactly what full update did you do?

Similar Messages

I installed iTunes 10.5.3.3 and now my DVD player won't work.

I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Any ideas why iTunes renders my DVD drive unusable? I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
Why is this happening?
Here is my computer information:
Dell
Latitude D630
Intel Core Duo CPU T770 @2.40 Hz
4.00 GB RAM
32-bit Operating System
Thank you,
Kelly

There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

TS4148 My 3G doesn't work anymore since the iOS7 update

My 3G doesn't work anymore since the iOS7 update
What to do now?

Mine stopped working today. I have tried all obvious methods to resuscitate it but no luck. Is this to do with the upgrade?

Dvd player won't work...ejects them

My dvd player will not work. Everytime I put one in, it spits it right back out.

You may be able to get the bottom replaced by Apple at no cost - some of the newer white MacBooks had this issue.
More information on that here
As for replacing the drive, here's a guide for doing the replacement yourself, and here is a link for a replacement drive.
Looks like the cost is $90 right now.
You can get a portable external for ~$55, like this LaCie from OWC.
With regard to your current optical drive - make sure the discs you've tried work OK in other computers or in stand alone DVD players. If they do, that definitely indicates yours is dead or dying.
CDs may still work though so if you have any CDs handy, it would be worth trying a few to see if it will accept them.
Hopefully this helps you a bit - if you have more questions, please do ask!
~Lyssa

HT5706 How do I update my software on my Apple TV if the television isn't supporting my ATV anymore since the last update. Can I update through iTunes?

Since I last updated ATV my own tv no longer supports my ATV. On my HDMI channel it is picking up different Hz levels ranging from 18 Hz to 180 Hz when ATV is plugged in. A few times some white lines have appeared on the screen as though it is trying to connect. I have tested a different HDMI chord and that didn't have any effect and I've reset my Wi-if router. My tv still supports my bluray DVD player through the HDMI port. I want to update my ATV as I think that will fix the problem, but I can't see the menu on the tv to do so. Is there any way I can do this via iTunes or iPad?

What TV are you using? Did you try switching ports?
Yes, you can connect to iTunes via micro usb. It will restore the system and install the latest firmware.
http://support.apple.com/kb/ht4367

DVD player won't work on OSX 10.9.1

When I loaded OS X 10.9.1, I am now unable to play videos on my MacBook Pro. Is there any updates so I can get it to work?

I upgraded to OSX Mavericks (10.9.1) on my MacBook Pro last Wednesday, January 8th, and since then I am also having the same issue with my DVD player not working since the upgrade. There are no error messages, the drive just kicks out the DVD. CD's work fine, though. And yes, I have checked my settings in the System Preferences and they are all set correctly.
Any help would be appreciated, but I may just end up taking my laptop to the Apple Store geniuses to see if they can sort it out...

SONY CD/DVD Player won't work with my HD DVR. Need advice please.

Just purchased it and I wired to the HD DVR receiver. Can't get it to setup or work at all. Any clues out there? Thanks.

snafu wrote:
Just purchased it and I wired to the HD DVR receiver. Can't get it to setup or work at all. Any clues out there? Thanks.
Are you saying you connected the DVD player to Verizon's STB (HD DVR)? If that is the case, there is no configuration that will work since there are no active inputs on the boxes from Verizon.
You need to connect the DVD player directly to an input on your TV or Home Theater system (if you have one).
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Toshiba DVD player is not working properly since Windows 7 upgrade

I recently upgraded to Windows 7 and can no longer get my Toshiba DVD player to work.
I have tried updating drivers, uninstalling and reinstalling. Also, I tried to download a Realtec driver meant for Vista from a suggestion on another thread and that was even worse. It is currently uninstalled, but when I install it, it either doesn't play at all or I get an error saying that it can't connect to the output device.
Has someone experienced a similar problem on Windows 7?

I have the same problem - I have upgraded my new Toshiba satellite L300-29V and the Toshiba DVD player wont work. The error message I get is "modules needed for this application are missing - if restarting does not work then re-install application" - I don't know how to reinstall - supposedly the application is on a partition on my hard drive but I dont know how to get at it. Any suggestions please?
Tim

X isn't working anymore since the last system update.

Hi there,
I'm using Arch for a couple of months and didn't need a forums login until now. But currently I've broken somehow my system and can't get it working anymore. So I need some help of you.
The Problem:
Arch Linux is running on my computer at work as a virtual machine inside VMWare Player 6.0.2-1744117. Host ist Win 8.1. After the system-update xorg didn't start anymore. Neither with kdm nor with plain X. When I start the X-Server (X as user or systemctl start kdm), the cursor of the tty console appears in the upper left corner, but isn't blinking. That's all. Only a black screen. It seems, X itself isn't starting. There's no process in ps and no graphics mode switch. In journalctl there's no (error) message.
What I've done:
Last week I made a system update, xorg-server was a part of it:
yaourt -Qi xorg-server
Name : xorg-server
Version : 1.15.1-1
Description : Xorg X server
Installed on : Do 12 Jun 2014 11:16:46 CEST
I've also updated xf86-video-vmware. xf86-video-vesa was last updated on 23th of January.
What happens (xf86-video-vesa)
/var/log/Xorg.log looks normal:
[ 43.168] (II) VESA(0): initializing int10
[ 43.168] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 43.169] (II) VESA(0): VESA BIOS detected
[ 43.169] (II) VESA(0): VESA VBE Version 2.0
[ 43.169] (II) VESA(0): VESA VBE Total Mem: 32768 kB
[ 43.169] (II) VESA(0): VESA VBE OEM: V M ware, Inc. VBE support 2.0
[ 43.169] (II) VESA(0): VESA VBE OEM Software Rev: 2.0
[ 43.169] (II) VESA(0): VESA VBE OEM Vendor: VMware, Inc
[ 43.169] (II) VESA(0): VESA VBE OEM Product: VMware virtual machine
[ 43.169] (II) VESA(0): VESA VBE OEM Product Rev: 2.0
[ 43.169] (II) VESA(0): virtual address = 0x7fa613360000,
physical address = 0xe8000000, size = 33554432
[ 43.173] (II) VESA(0): Setting up VESA Mode 0x148 (1856x1392)
[ 43.179] (==) VESA(0): Default visual is TrueColor
[ 43.184] (==) VESA(0): Backing store enabled
[ 43.185] (==) VESA(0): DPMS enabled
[ 43.185] (WW) VESA(0): Option "RenderAccel" is not used
[ 43.185] (==) RandR enabled
[ 43.889] (II) AIGLX: Loaded and initialized swrast
What happens (xf86-video-vmware)
Starting X gives me:
VMware: No 3D enabled (0, Success).
(EE)
(EE) Backtrace:
(EE) 0: X (xorg_backtrace+0x48) [0x584b08]
(EE) 1: X (0x400000+0x1887f9) [0x5887f9]
(EE) 2: /usr/lib/libpthread.so.0 (0x7f6befdc8000+0xf4b0) [0x7f6befdd74b0]
(EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0x14848) [0x7f6beb662848]
(EE) 4: X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
(EE) 5: X (xf86SetDesiredModes+0x106) [0x4aae76]
(EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f6beb64e000+0xe8c0) [0x7f6beb65c8c0]
(EE) 7: X (0x400000+0xa7b9e) [0x4a7b9e]
(EE) 8: X (0x400000+0x39966) [0x439966]
(EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f6beea35000]
(EE) 10: X (0x400000+0x2507e) [0x42507e]
(EE)
(EE) Segmentation fault at address 0x8
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
Segmentation fault
I've tried a downgrade to xorg-server 1.5.0.5, but it didn't help.
I would prefer the vmware graphics driver, but temporary the vesa driver would do the job too. I can access the system via ssh from outside. Inside the VMWare after starting X I can't switch to the tty consoles anymore.
Any ideas?
Thanks so far.

I upgraded everything today including open-vm-tools-dkms and it still does not work.
MickeyKnox has the same problem: https://bbs.archlinux.org/viewtopic.php?id=182971
This is his codebin, same errors I have: http://codebin.org/view/53bcafc9
Could this be related to this report: https://bugs.archlinux.org/task/40781?
How could I install the version from the git?
[EDIT] I also tried downgrading mesa and mesa-libgl to Version 10.1.4-1 to no avail. (see bug report FS#40781 above)
[EDIT2] At least I can now use [ALT]+[F2] to log into the system without arch-chrooting from a live medium. So it hangs "less bad" ...
I also get the following error (as does MickeyKnox):
[ 42.709] (EE) Failed to convert pixmap to scanout.
[ 42.709] (EE)
[ 42.709] (EE) Backtrace:
[ 42.726] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x584b08]
[ 42.726] (EE) 1: /usr/bin/X (0x400000+0x1887f9) [0x5887f9]
[ 42.727] (EE) 2: /usr/lib/libpthread.so.0 (0x7f324d915000+0xf4b0) [0x7f324d9244b0]
[ 42.727] (EE) 3: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0x14848) [0x7f32487af848]
[ 42.727] (EE) 4: /usr/bin/X (xf86DisableUnusedFunctions+0xa2) [0x4aa722]
[ 42.727] (EE) 5: /usr/bin/X (xf86SetDesiredModes+0x106) [0x4aae76]
[ 42.727] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f324879b000+0xe8c0) [0x7f32487a98c0]
[ 42.727] (EE) 7: /usr/bin/X (0x400000+0xa7b9e) [0x4a7b9e]
[ 42.727] (EE) 8: /usr/bin/X (0x400000+0x39966) [0x439966]
[ 42.727] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f324c582000]
[ 42.727] (EE) 10: /usr/bin/X (0x400000+0x2507e) [0x42507e]
[ 42.727] (EE)
[ 42.727] (EE) Segmentation fault at address 0x8
[ 42.727] (EE)
Fatal server error:
[ 42.727] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 42.727] (EE)
[ 42.727] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 42.727] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 42.727] (EE)
Last edited by garunkel (2014-06-17 17:37:07)

My BBZ10 is not working properly since my last update (OS 10.3.1.2243

OK so to start on a positive - I have been the biggest advocate of Blackberry over the last 3 years and have found it a really easy phone to just pick up and use without having to spend much time with user manuals. I started on a Torch and am now using the BB Z10. I found the switch nice and easy & have loved both phones. Up until now, bar the odd little niggle, I have loved using Blackberry.
I had a notification to update to OS 10.3.1.2243 (no matter how often I read my notification, it would keep changing to unread and start flashing again) which was a nuisance, but I needed to sort through my notifications first and delete FB as the last update I did, restored ALL my FB notifictions since I'd had the phone, so definitely needed to avoid that scenario.
I could see there had been some changes - layout different, easier to delete messages etc which is great, HOWEVER, I am really disappointed with how it's messed my phone up which I have never had before. There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing. Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before), my ringtone is much softer than it was previously and BBM no longer has a ringtone. Whatsapp, (the current winner of sending messages as I can actually see what I'm typing) actually has a tone but it's really soft, so not only can I not see what I am typing, but I can't hear when I get a message either, even if it's a person who has a specific ringtone for BBM
My notifications keep freezing (can be when I am on looking at email notifications, Facebook etc) and some of my keys keep freezing when I am trying to type (p is the worst) and is generally making using my BB highly irritating. In fact there are times that I am so irritated that I want to throw my phone on the floor and jump on it. There is nothing wrong with the phone as it worked perfectly prior to the update, so this must be bugs in the new OS which is not good at all as these problems should have been ironed out prior to release.
Does anyone know me how to fix this or can tell me when the next update is out to fix the bugs? It's all good and well adding all these great features, but if they mess up the basics, none of that is important and if I was nearing the end of my contract, I would definitely not be going Blackberry which is a shame as I've never had an update problem before with BB.
Solved!
Go to Solution.

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Aperture and DVD Player no longer work with NVIDIA 330M, help!

I recently got my computer back from the Apple Store, had the display switched because the glass kept falling off.
Anyways, since getting it back, I noticed DVD Player doesn't work anymore, it gives me:
There was an initialization error
A valid video device could not be found for playback. [-70017]
And when I try to start Aperture 3.3:
Error
The installed graphics card does not meet the minimum requirements for Aperture.
I have a mid-2010 MBP i5 2.4Ghz with 8GB memory, running OSX 10.7.4.
Things i have tried:
Reset PRAM
Reset SMC
Boot into recovery mode and fix permissions
Boot into 32 bit kernel
force fsck
Create new user and try from that account
Also my video conference software, Jabber gives an error and quits too. Its something with the video.
Switching to Intel HD video, everything works fine. Only with the NVIDIA 330M do I get this error.
Does anyone have any idea what this may be or what I could try?

I'm having exactly the same problem. Additionally, the DVDs I make aren't recognized by other Macs I've tried. All the Preferences are set correctly.
My dvd player no longer reads commercial movies or a
dvd project I just burned with it. Disks no longer
show on my desktop when they are inserted. When I
got to dvd player and manually press play it reads
"not Permitted" for both.
The burner does work in as I played the dvd in my
home dvd player.
PowerBook G4 Mac OS X (10.4.6)

OSX: Connecting to admin session not working anymore since 8.0.12

Hey
It seems to me that connecting to console session does not work anymore since the recent update to 8.0.12. Had no troubles before the update, now it does not connect to the console session but a normal one. Please fix this.
Mac OSX 10.9.5, Apple Remote Desktop 8.0.12
Cheers, Marcel.

Hey Dharmesh,
Thanks for your reply. I mixed up terms. I cannot connect to the "admin session", in my last message I used the term "console session", sorry about that. Connecting works, but it connects normally instead of the admin session. Checkbox
"Connect to admin sesssion" is active.
In the logs I found the following message. Not sure it's related to my problem.
Cheers,
Marcel
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name.com' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Exception caught: Exception in file '../../librdp/itotlayer.cpp' at line 875
User Message : Security negotiation Error: NotAllowed(2)
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): **** User ACCEPTED connection to basic security host
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolActive(5)

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

WHAT IS IT THAT MY CD-DVD PLAYER IS NOT WORKING

ONE OF MY MC COMPUTERS CD-DVD PLAYER IS NOT WORKING PROPERLY, DOES NOT START THE CD-DVD.. SINCE IS NO DRIVE IN THERE..

http://support.apple.com/kb/HT2801

Dvd player does not work after Leopard upgrade

I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

My dvd player won't work anymore since my last update !!!

Similar Messages

Maybe you are looking for