My DVD plays on my Mac and new BluRay player, but not on my TV

I burned a DVD with three mp4 movies. The movies play fine in QuickTime, and the DVD plays without a problem on my Mac. It also plays correctly on a newer BluRay player. However, when I try to play the DVD on an older DVD player (about 3 years old), I have problems. The DVD starts OK, and I can navigate the menu choices. However, I find that after about a minute, the player simply freezes, and I can't play or change anything. I tried burning a new DVD with a different format, but the same thing happened. I think the problem might just be that my DVD player is too old, but I wondered if there is a setting in iDVD to be compatible with older players. Any help would be appreciated!

I tried burning a new DVD with a different format
I'm not sure you mean because ALL video DVDs are in multiplexed MPG-2 format.
I suspect your set-top DVD player doesn't 'like' writable' media (it used to be fairly common). You might try using a DVD cleaning disc in case there is any dust over the player optical system.

Similar Messages

After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine. How do I get my music back????

After buying a new Macbook pro and opening an iTunes Match account most of my music is grayed out on my Mac and iPhone. I have not turned on iTunes match on my iPad and all my music is fine. How do I get my music back????

The most efficacious way to get your music and other personal data onto your new Mac is to restore it from the backup you made of your old computer. Once that is done you can re-enable iTM on the new Mac and your iPhone.

New songs synced to my ipod wont play, the songs play fine on itunes and appear on ipod but wont play..any help appreciated

New songs synced to my ipod wont play, the songs play fine on itunes and appear on ipod but wont play..any help appreciated

So, if you select one of these songs on the iPods screen, and try to play it, what happens? The iPod does nothing? It skips to the next song?
It's possible you will have to do a Restore on the iPod, if there is data corruption on the iPod causing this problem. The Restore erases the iPod, and removes any corruption.
NOTE: There may be a hardware problem, such as the iPod's hard drive becoming unreliable, that is causing this problem and data issues. It may continue to operate as long as its data stays mostly unchanged, but if you do a Restore to update the hard drive's data in a major way, it is possible that the Restore will fail and leave the iPod non-operable.

Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?

Since upgrading to 10.8 I've had alot of issues burning DVD's. I've had the drive replaced and now I can burn from a new user account but not the old one. Is there any way of making the old one work?
Just want to avoild spending hours migrating everything across....

Yes, I can read but just can't write DVD's. I get:
This disc can’t be verified and might be unreliable. Try again using a new blank disc (error code 0x80020063).
Originally I thought it was the old Moutain Lion DVD drive issue (but have had the drive recently replaced by Apple), so I tried creating a new account, which worked.
In the old account I have reset SMU, Pram... but no change.

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

Why will DVD play on one player but not another??

Hi,
I made an ISO file using devede and then burnt it to a DVD using K3B. The finished DVD will work on a Magnavox player but not a JVC. Is there anything I can do about this??? Do some players have a "must be produced commercially" filter or something???
Jim
Last edited by MillTek (2008-04-20 20:45:12)

First, I am assuming you recorded your iso on +R type media. Next, I'm guessing that the player that won't play your DVD is the older of the two players. Some DVD players, especially older ones don't like +R media. If this is the case, here is a possible fix.
Here is a thread on another forum which discuses changing the booktype on your DVD burner. Here is a quote from the original post:
There have been many questions asked about how to booktype +R media to DVD-ROM
Many standalone Players, HDD recorders/players and games consoles don't like +R media but they are happy enough to play -R or DVD-ROM.
Some drive brands have tools to change this option but others don't. I have found that the easiest way to change your BOOKTYPE setting is to use a small burning tool called IMGBurn which can be found doing a Google search.
Below you can see some screen shots which guide you through changing your BOOKTYPE setting. For this I have used my NEC4551 but IMGBurn supports NU-Tech, Plextor, Ricoh, Samsung, BenQ, LG, Lite-on and NEC.
Once you have changed your BOOKTYPE setting, when you burn a +R/+RW disc it will be burned as a DVD-ROM which is the same as a bought movie and most players are happy to play these.
Since my DVD players are happy with +R media, I haven't tried this. Both of my players are fairly new, and I made sure that +R was listed on the box as one of the formats accepted by that player.
As usual, try this at your own risk.
Pudge

Scripts works in Simulator and Apple DVD player but not on TV

I have a basic project with two different tracks.
The first one is video and audio. Plays "as is".
The second has video, two audio and one subtitle. Depending on which button, the second Track should be played with different audio and with/without subtitles.
(I use GPRM 1 to set the subs stream, GPRM 2 for the audio and GPRM 3 for menu button navigation).
On the second Track I have a pre-script that sets the streams depending on the value of GPRM 1 and 2.
Works fine in Simulator and in Apple DVD player, but not on the stand-alone player.
Any idea what might be the issue here?
in short:
Button 1: Play Track 1 "as is" (audio 1, no subs)
Button 2: Play Track 2, audio 1, subs on
Button 3: Play Track 2, audio 2, subs off
Button 4: Play Track 2, "as is" (audio 1, subs off)
Menu button and End Jump should go to the corresponding menu button.
Many thanks for your help.

It is part personal preference, part artistic, part what makes the user experience the best so there may not be one "right" answer and I have often made menus one way than changed them when viewing the DVD for something that seemed to work better.
Looking at you description I started playing with some ideas in my head and started typing them, then changed what I was writing
It sounds like you want chapter selections for both track 1 and track 2? If so it may make sense to have the initial menu have Track 1 and Track 2 buttons which then link to sub menus where there is "Play All," selections for each section of each movie and one last button for the preferences.
Alternatively you could also place the preferences selection button on the main menu, though since Track 1 does not sound like it really has preferences you need to make sure that users do not become confused and think they have turned something on/off and are not seeing these options when they thought they selected them when they play back Track 1.
Also with 6 to 8 chapter markers you may be getting close to the point where scripting could make it easier if your selections are just to play the sections - in other words for track 2 four stories take care of the combinations Audio 1/Sub Off, Audio 1 Subs On, Audio 2 Subs Off, Audio 2 Sub On. If the chapter selection starts the track a scene then plays through you can target chapter markers in the story so 4 stories takes care of it. If you are just playing sections you would need 4 x 6 or 8 chapters - 24 or 32 stories roughly. But it is actually fairly quick to do - just set up the intial Play All with all subtitles and audio selections unchecked except for "1" then copy from there. Probably should take under 10-15 minutes or so
Put a real quick thing together for a quick view of the tracks. I can flesh it out more if you like.
http://www.dvdstepbystep.com/081107Sub.dmg
The main menu will be the title menu, then the sub-menus (including the set up menus) can be placed in the same VTS as the applicable tracks which can help a bit with DVD performance speed. Since there is 6 to 8 chapter markers on a track each of the main sub-menus would have 8-10 buttons which can work in the design.

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

Hi, Jjenjen30.
Thanks for the question and I believe we have a solution. The best option would be to delete the movie that is giving you an issue and redownload it via the iTunes store past purchase option. I have included a couple articles that will show you how to process these steps.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If this does not resolve the issue, then iTunes might need to be notified to let them know there is a problem with the content. I have included the steps on how to let them know.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Cheers,
Jason H.

I want to download an app, it keeps telling me my password is wrong, I changed it on my mac and it was accepted, but the iphone still says it's wrong

i want to download an app, it keeps telling me my password is wrong, I changed it on my mac and it was accepted, but the iphone still says it's wrong

This same thing happend to me, you have to make a new account and you have to chose your birthday as if your under 18 or 16, because if you dont own a credit card, you shouldnt be over this age, so basictly just make a new email and appleID and when you chose your birthday, do it under 16 years of age (or your REAL birthday) and you should have an option of clicking "none" for credit card options, but if you want to buy something, you will have to do the credit card stuff, or you can just buy an apple gift card at basictly any store, So this is how i fixed my problum, i hope it works for you, write back your responce of how it worked out please!

Have a 10.6.8 mac and the icloud icon does not appear on the system preferences

Hello,
I have a 10.6.8 mac and the icloud icon does not appear on the system preference, even if I'ved upgraded the software.
Renee

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

Provided the music plays in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that.

I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

My DVD plays on my Mac and new BluRay player, but not on my TV

Similar Messages

Maybe you are looking for