My DVP-FX980 (portable DVD player) will rarely load a DVD

This happened gradually but for months now it has rarely loaded anything. It tries then says it cannot load the disc. For months it loaded some but not others so I thought the discs were at fault since many of them were from the library. But as the problem increased I tried the discs on my laptop and they always worked fine. I expected better from a Sony product. Does anyone have a remedy?
thanks

You may follow this link if the DVD player cannot read or play the inserted disc.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

I have a an imac with Lion OS x software 10.7.5. The built in DVD player will no longer play dvd;s and it says its an unsupported disc. I have done a risk disk permissions and verify disk and both say ok

I have a an imac with Lion OS x software 10.7.5. The built in DVD player will no longer play dvd's and it says its an unsupported disc. I have done a risk disk permissions and verify disk and both say ok.
I haven't changed any settings regarding region codes

You may have run discs from different regions,these would be commercial DVDs. If so most DVD players need to be told what region the disc is from. Have you done this by chance, if you are not sure look at the region numbers listed on the commerical DVDs you have and see if some use different numbers.

Dvd player will not recognize imac dvd -70012

I'm on a iMac7,1, Intel Core 2 Duo, running 10.6.8.
Inserted DVD and did not show up on desktop or launch dvd player. Tried to open dvd player application and got: A VALID DVD DRIVE COULD NOT BE FOUND (-70012).
pressed eject button alot...
ran permission repair
restarted many times, holding down various keys.
tried command line: drutil tray open & drutil eject
tried CleanGenius: http://www.easemac.com/support/online-help/eject-device.htm
many other things. Could not locate: Try going into your home folder/Library/Preferences and look for a file named com.apple.DVDPlayer.plist and throw that out.
https://discussions.apple.com/message/17005270#17005270
what can i do?

Yeah, that's not good. You could try resetting the SMC, sometimes it helps. Other than that you have two choices replace the drive, either yourself or by someone, or just buy an external drive. Considering that your Mac is 5 years old I'd go the external route. To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

I have a 27"iMac running Snow Leopard 10.6.8. and Windows 7 on parallels 6. My dvd player will not play DVDs. Has anybody else had this problem.

My DVD player will not play any DVDs. Anybody else have this problem.

This has been sorted.Got a new iMac 27" with Lion already installed and DVD player works. Thank you to all who replied. Meloc

My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

How do I separate short movie clips loaded from my digital camera to iPhoto 11 at the same time pics are downloaded and how do I get those video clips to a dvd that will play on a dvd player

When loading pics to iphoto 11 from my camera, occassionaly it will include some video clips with the description of Movxxxx. I wonder if someone could direct me to some straight forward instructions as to how to transfer these video (movie) clips, which now exist in iphoto, to a dvd that will play on a dvd player as one might expect to see a video play, including the audio that was captured at the time of filming.
Thanks in advance for any assistance you can offer this novice.

You need to open iMovie and it will have a event library called iPhoto Videos, click on that and the videos will load in the window next to it, then you make a new project in iMovie. Then open iDVD and make a new project then import the movies to the program then burn to a DVD..

DVD player will not work

I am trying to play dvd's on my mac pro but the dvd player will not run. Does anyone know where I can get an upgrade/ fix ??
Process:         DVD Player [58163]
Path:            /Applications/DVD Player.app/Contents/MacOS/DVD Player
Identifier:      com.apple.DVDPlayer
Version:         5.6 (5500.38)
Build Info:      DVDPlayer-5500038000000000~34
Code Type:       X86 (Native)
Parent Process: launchd [365]
User ID:         501
Date/Time:       2012-09-16 22:36:07.178 -0500
OS Version:      Mac OS X 10.8.1 (12B19)
Report Version: 10
Interval Since Last Report:          257115 sec
Crashes Since Last Report:           7
Per-App Interval Since Last Report: 26 sec
Per-App Crashes Since Last Report:   6
Anonymous UUID:                      D70F569D-5D53-4F09-8BF6-6B5E54D921AF
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
TF->from:1 to:0
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFString bytes]: unrecognized selector sent to instance 0x7cbc2280'

hi, ive been having excatly the same problem for a few months. it started happening about 6 months after i got it. then i wrote to mac and they came to take it away and fitted a new drive. Now its happening again. Have you sorted yours?
pleasee mail me on [email protected]
thanks

I have an IMAC and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected.

I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's. As they are inserted, they are immediately ejected. How do I fix this?

try resetting the System Management Controller (SMC).

My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

Do you have a friend with an Intel Mac. If your MacBook and their Mac have firewire ports you can install by Target Disk Mode. You'll need a retail version of SL to do this with any Mac other than a MacBook.
Start up your friend's Mac with your install disk. After you get to the install screen on your friend's Mac connect your MacBook to your friend's Mac in "Target Mode"with a firewire cable http://support.apple.com/kb/HT1661
Then open "Disk Utility" from the "Utilities Menu" on the Menu Bar from the install disk on your friend's Mac. You should see both your MacBook and your friend's Mac hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen. Or install over your existing OS on your drive if you have applications you want to keep.
The only other way is to buy an external DVD drive on eBay. http://shop.ebay.com/i.html?_nkw=firewire+external+dvd+drive&_sacat=0&LH_BIN=1&_ sop=15&_dmpt=Apple_Laptops&_odkw=usb+external+dvd+drive&_osacat=0&_trksid=p3286. c0.m270.l1313 or at MacSales http://eshop.macsales.com/shop/firewire/optical-drives/
And of course be sure your Macbook meets the system requirements. To upgrade to Snow Leopard or install Snow Leopard for the first time, you must have a Mac with:
An Intel processor.
An internal or external DVD drive, or DVD or CD Sharing.
At least 1 GB of RAM (additional RAM is recommended).
A built-in display or a display connected to an Apple-supplied video card supported by your computer.
At least 5 GB of disk space available.

How do I export a movie in iMovie'13 to a dvd that will read on a DVD video player?

How do I export a movie in iMovie'13 to a dvd that will read on a DVD video player?

IDVD won't read my iMovie. I downloaded BURN, did as instructed and the DVD player still won't read the disk.

What version of DVD player will work with Mac OS X 10.6.8

Hi,
DVD player was uninstalled on my macbook pro and currently running Mac OS X 10.6.8. What version of DVD player will work as each one I have tried won't open.
Thanks

Use Pacifist to extract it from your Mac OS X 10.6 DVD and then run the Mac OS X 10.6.8 combo updater.
(71806)

How do I export an IMovie to a dvd that will read on a DVD video player?

How do I export an iMovie '13 to a dvd that will read on a DVD video player?

Use iDVD to do it. Select and click "Share" at the top of the window in the menu bar of iMovie, and you can find "iDVD". But have you got iDVD installed on your Mac? If not, please check https://discussions.apple.com/docs/DOC-4821 to reinstall it. If you have no iDVD installed and don't want to reinstall it either, you can use other DVD creator software to help you burn iMovie to DVD.

How to make a DVD that will play on a DVD player if I don't have iDVD

How do I make a DVD that will play on a DVD player if I don't have iDVD?

First you will need a video DVD authoring applicaiton like iDVD. If you have iDVD export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
OT

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

I have had my mac book pro for about a year and a half and suddenly my dvd player will not play DVDs and i can not play alot of things on full screen. Does anybody know how i can fix this?

This could be several things, but let's get the obvious ones out of the way, first:
1. Judging from your text, there's no problem with anything stuck in the mechanism; it's more an issue of no being to put in a disk. In other words, you're sure that there isn't a disk stuck in your MBP. (That happens a lot for all computers.)
2. Go to Applications/Utilities/Disk Utility, and repair the disk. This should take under 10 minutes.
3. Perform the procedure outlined here:
http://forums.macrumors.com/showthread.php?
4. After you're done, leave a message here as to the status of the repair.

Is there a way to burn an imovie I made to a dvd that will play in my dvd player connected to my tv?

Is there a way to burn an imovie I made to a dvd that will play in my dvd player connected to my tv?

Yes but this has nothing to do with iTunes.
Open the file in iMovie and select menu Share > iDVD.

My DVP-FX980 (portable DVD player) will rarely load a DVD

Similar Messages

Maybe you are looking for