My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...
My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)
The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.
Similar Messages
-
When I try to load firefox 4, I am asked do I want it to replace a newer version?
that's about it. I always decline the FF 4.o because I am told I have newer version.
A program you installed decided to include the Ask Toolbar. (Note the "AskTbBCPA/3.7.0.231" in your User Agent string).
Close Firefox, then uninstall this with Control Panel -> Programs and Features.
Then reset your home page as you'd like. See [[How to set the home page]] -
I'm trying to access several pages and keep geting "Your page is blocked due to a security policy that prohibits access to Category Remote Proxies" After going over all my security stuff I just can't find where I would correct the error.
Is there anyone who could help me?
Thanks
Fr. Garyvery strange,
1. check time and date on your computer
2. reset network configuration, make sure there are no proxy servers and you get DNS from your router not manual
3. Reset certificates database
Go to Terminal (Applications>Utilities)
sudo rm /var/db/crls/*cache.db
(you will be prompted for your password)
and reboot the computer
post back -
using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it
That toolbar/ct plugin seems to cause problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Also, as mentioned by Gilli2000:
Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
Maybe it is harmless, but trash those items anyway!
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
When I try to open Firefox, I get an error message that reads "The procedure entry point ?CreateDrawTargetForCairoSurface@Factory@gfx@mozilla@@SA?AV?$TemporaryRef@VDrawTarget@gfx@mozilla@@@3@PAU_cairo_surface@@ABUIntSize@23@@Z could not be located in the dynamic link library gkmedias.dll.
My only option is to click okay in the Error Message Box, but Firefox will not open then.Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
*(32 bit Windows) C:\Program Files\Mozilla Firefox\
*(64 bit Windows) C:\Program Files (x86)\Mozilla Firefox\
*http://kb.mozillazine.org/Installation_directory
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/ -
When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you. -
How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.
Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.
-
I am trying to restore an old iphone to a new iphone but it will not allow becaue it says the "old iphone" password is incorrect but the passwork I am using works for my ITunes account and is the only password I have..?? Please help!! Thank you.
When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
http://support.apple.com/kb/TS1567 -
When I try to start Firefox, I get a message that it is already running, but not responding and that I should close it before trying to run another Firefox. But I cannot find a way to close Firefox program that is not running as far as I can see. I tried uninstalling and reinstalling Firefox, but that did not work. I've tried various other things, but no luck. I thought programs should stop when the computer is turned off, but that didn't work either.
How are you opening the Profile Manager?
*http://kb.mozillazine.org/Profile_Manager
Sounds that Firefox is still or already running.<br />
See:
*http://kb.mozillazine.org/Kill_application -
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.
Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation. -
When I try to download firefox it asks me if I want 6.1 and that it will harm my computer. I just want firefox 5 edit
Sorry, Firefox 5 isn't supported an longer. Your choice is Firefox 3.6.21 or 6.0.1 for currently supported versions.
-
When I try and install firefox it says that I do not have the correct privaliges- MAcBook Pro.
When I try to update Firefox, it says that I do not have the correct privileges.
You can try to repair the permissions for the Firefox application files and folders.
You can also do this:
Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
Trash the current Firefox application to do a clean reinstall.
Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
Streaming from my iPad to my tv is not working, it keeps saying the iTunes accounts are different but I've checked it a ton of times and its the same, anyone had the same problem?
Hi JenJen73,
If you are having issues with AirPlay streaming from your iPad to your Apple TV, you may want to take a look at the troubleshooting steps in the following article:
Apple Support: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
- Brenden -
I have a new iPhone 5s. When I try to sync it with my iTunes account it is unable and advises to update iTunes to version 11.1. Whn I attempted this iTunes advised that the current version I have (10.6.3) is the most up to date!
If you're on a Mac, you need to upgrade it to Mac OS X 10.6.3 and then 10.6.8, which requires that it has an Intel CPU and at least 1GB of RAM.
(100999)
Maybe you are looking for
-
Dynamic action in column of classic report
Good day master! Hi im new in apex,, so im dynamic ondering if its posible to create a dynamic action in the column of classic report in apex? i'm trying but its not working my problem goes like this.. i have a classic report stock_replenish columns
-
Sequence Settings, HD Export problems.
1. I'm importing a perfectly good quality Quicktime Movie segment of about 150 MB 1344x840 H.264 codec Duration 00'55 ...in which it's perfectly easy to read small print in the movie. The source audio/video comes from the game World of Warcraft, and
-
I'm trying to read and write 16-bit characters to a file. If i write a character such as (char)8226 I am able to read it back in from the file without any issue. However, if I write out and try to read (char)8227 it will be read in as (char)63. I not
-
Nomad Jukebox zen nx : library does not load in
After replugging my Nomad Jukebox Zen Nx (.00.05e) to my computer, CMS(3.0.09) did not recognize the player. I followed the tips on this forum and installed the latest drivers and plug-ins. Now the player appears in the device manager, but the librar
-
Multiple transform/assigns for one variable - is this possible?
Hi, What I am trying to do is read in a complex XML file. Transform some data, add some other data from another source and update a table in the database with all data. So currently I read in the XML file. Do one big transform to map the majority of