MY E5 DEAD AFTER INSTALLING 2 ANTIVIRUS APPS

My e5 went blank after installing netqin app while kaspersky mobile security was still installed. What's the solution. Please help

@Drogzf
Presumably you have already tried removing battery for 10 minutes and replacing?
As three button depressed power on "hard reset" combination has to date never been confirmed for E5, there is little alternative but to visit a Nokia Care Point unfortunately.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • My external drive went dead after installing Leopard

    Hey guys
    I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
    Thank you in advance

    Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
    You can't download them again with purchasing once again.

  • After installing an App, the icon does not appear on the desktop?

    After installing an App, the icon does not appear on the desktop? Where would I find it?

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

    After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

    Steps to take to resolve this issue:
    1/  Turn off Wifi
    2/  Ensure Mobile (cellular) data is on
    3/  Turn iPhone OFF and then ON (re-boot iPhone)
    4/  Without turning Wifi on, open an app that requires mobile (cellular) data.
    5/  The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
    6/  In time all apps that require or use mobile data will be added to the list automatically.

  • Tomcat dead after install of SP 1

    Hello,
    I installed webaccess on my server (SLES 11 SP3).
    During the install script I noticed some trouble with tomcat and right,
    after install tomcat reports "dead"
    rcnovell-tomcat6 start brings the message
    "lock file found but no process running for pid xxx, continuing .... done"
    But a status afterwards states "dead" again.
    I found this thread [1].
    Following the discussion I checked catalina.out and there is no entry
    with "Deploying Groupwise webaccess version 14.0.1"
    This thread ends how so often in open state :-((
    On same machine is out calendar publishing host, may be, it´s also affected.
    Where can I search?
    Gotthard
    [1]
    https://forums.novell.com/showthread...-to-Web-Access
    Gotthard Anger
    Anwenderbetreuung Netzwerkadministration
    Landeskirchenamt der EKM
    [email protected]
    http://forums.novell.com/member.php?u=35038

    Originally Posted by gotthardanger
    Am 31.08.2014 18:58, schrieb Gotthard Anger:
    > Hello,
    >
    > I installed webaccess on my server (SLES 11 SP3).
    EDIT:
    a) I updated webaccess from 14.0.0 to 14.0.1
    b) system is OES 11 SP2
    Go
    Gotthard Anger
    Anwenderbetreuung Netzwerkadministration
    Landeskirchenamt der EKM
    [email protected]
    http://forums.novell.com/member.php?u=35038
    Did you see this TID: http://www.novell.com/support/kb/doc.php?id=7015536
    Thomas

  • After installing Mavericks, App Store/Numbers/Pages don't load

    After installing the upgrade the Mavericks, some apps wont open including;
    App Store, Numbers, Pages, iBooks, Maps, Keynote
    Error code in Console reads;
    Unable to load nib file: Mainmenu, exiting
    as well as exited with code : 1
    Can anyone help or is it a trip to the store?
    I'm on a Macbook Pro early 2011
    Thanks,

    All
    I found the solution myself without having to go to the store.
    Restarted Mac
    During startup, hold down Command and R keys when grey screen appears
    Popup appears
    Select Reinstall OS X
    Reinstalls Mavericks
    Some Apps still dont work - Numbers, Keynote, Pages
    Simply moved Apps to trash, emptied trash and rebooted Mac
    Went to App Store - now working after reinstalling Mavericks - and went to Purchases and installed/updated Apps
    All now working fine......
    Hope this helps anyone else.
    PS....DO NOT RUN TUNEUPMYMAC APP - I think that this may have added to the problem after installing Mavericks the first time, but can't be sure.

  • My HD-EG5 hard drive only shows me 99 mb of blank space after installing the App lock feature. ??

    Upon installing the HD-EG5 500gig Hard Drive & installing the app lock feature, I was prompted to unplug & replug the drive in. When I did all that showed up was a 99 mb section called App unlock. After checking the drive at the most basic level, I can see the other 460+ gig using external software but it cannot be seen when you plug the drive into a USB port.

    Travis,
    I suggest that you format the hard drive in FAT32 format to resolve the issue.
    If my post answers your question, please mark it as "Accepted Solution".

  • Slower system reboot after installed CC Apps. Why?

    I have a 2011 thunderbolt 17 inch macbook pro with an SSD HD and 8 gigs of ram installed. When I installed my SSD, my computer would complete a restart cycle in 20 seconds. But after I installed the CC apps my computer reboots in about 40-45 seconds now. Im sure it is the CC apps that are causing this additional boot time because I did a clean install of my OS 10.8 and did my reboot before I installed the apps and it was back to its 20 second reboot. Once I reinstalled the CC Apps it was at 40 secs again. Does anyone know why the CC apps cause this additional time to my reboot? Im just curious?

    Hi AzzieScott,
    No sure, but things I wondered about - how long does a restart take if you started the mac in safe boot. Does ending any Adobe processes with Activity Monitor prior to the restart make it take 20 seconds again?
    -Dave

  • Increasing storage by deleting photos/video after installing OneDrive app?

    I'm trying to create extra storage on my phone. I had 4.8 GB of photos/video. Then I deleted a ton of photos and large videos and now its still saying I have 4.8 GB. Why is it not changing?
    Note that I recently installed OneDrive app to backup my photos/videos. Not sure if this makes a difference?
    Quote

    If you are trying to reduce content to gain memory for an iOS Update you wouldn't need the extra space if you update via a computer and iTunes vs. an iCloud update.  In any event you could always delete Apps to gain storage because after you update the iOS you can just re-download the Apps for free from the App Store. 

  • Phone resets self after installing new apps

    Every since 2.0.1 when I install new apps via iTunes sync my phone reboots. The sync does not finsh before rebooting either it just installs the apps reboots the phone and the apps are on there when it comes back on, but i have to re-sync to get the rest done i.e. music/videos.
    Anyone having this happen?
    This is the iPhone 3g

    ALSO.. I thought backups were supposed to be a little quicker with 2.0.1 well... it used to take around 20-30 minutes.. NOW it takes 2-3 hours ?!?

  • Zenserver process dead after installing June 2011 PRU

    ZCM 10.3.1 on SLES
    We were trying to image a new model of computer, Lenovo M91p, and having problems getting PreBoot service to launch. Thought perhaps the latest PRU would fix it. So downloaded and deployed the June 2011 PRU, and rebooted the server. Server sent this message via email.
    "Error: [6/2/11 2:26:29 PM] Loader.SettingsRefreshModule SettingsModule.SettingsUnknownError An internal error occurred while trying to refresh the system settings."
    At console the zenserver process status is "dead". I issued a zenserver restart but still "dead".
    What happened and how can I fix it?
    I installed this box a year ago just to test out Zenworks Configuration Management and this is the first problem we've had.

    Rbaker,
    the PRU is only for inventory, it contains updated definitions for
    software and hardware, it's not going to help with imaging, and should
    not have caused this problem. A reboot is not required after deploying
    the PRU, so I suggest that the problem was already present, just
    waiting to happen when the server was restarted. Can I suggest that you
    post this in the server-install forum, where you'll stand a better
    chance of getting the help you need?
    Shaun Pond

  • [HELP] Error Prompt after installing BLACKBERRY APP WORD 2.1 on my OS4.5....

    I have problem on my Blackkberry Pearl 8100 (OS4.5) bcuz after succesfull installed my BLACKBERRY APP WORLD 2.1 and ERROR PROMPT happened...
    The ERROR PROMPT says:
    (Uncaught
    exception:
    java.lang.OutOfMemoryError)
    Plz. help me how to reslove this problem ...  

    UP ! UP ! UP !

  • Evaluation error after installing my app on a new computer

    Hi,
    I created an application using Visual C++ 6.0 and the ComponentWorks Starter kit V3.0.
    The app uses the CWGraph ,CWKnob and CWBar.
    In the app the Graph is displayed on the main window and the other two are added dynamically when the user selects them.
    My problem is that after I Packaged my app with InstallShield and installed it on another computer an "evaluation... terminated in 5 minyutes" message is displayed everytime the user displayes the knobs or bars. NO error is diplayed about the graph and it works perfectly as long as the Knobs are not displayed.
    This problem does not occure on the development computer where the ComponentWorks installation CD was installed.
    Are there any special di
    rections for packaging the application?
    Thank you
    Ohad

    When you dynamically create controls, you have to manually include the licensing information in your Visual C++ project. This is true for all licensed ActiveX controls, not just the CW controls. You can read about this process in our Knowledgebase here.
    Best Regards,
    Chris Matthews
    National Instruments

  • Volume problem after installing Remote app

    After I installed the Remote app to my touch I used it for a little while and then turned it off. I went to use it again but when I was listening to music regularly I noticed that the volume was as high as possible even though I had it barely on. Does this have to do with the app or is something wrong with my touch?

    I deleted the app from my touch and now it works normally. Here's a link to how I did it. After you do it turn off your Ipod, then tirn it on again it should be fine. http://support.apple.com/kb/TS1702

  • Blackberry 8520 does not want to start after installing FB app

    Good morning.
    I installed my Facebook app found on the application world on the phone last ight. After it sucsesfully installed the phone asked me to reboot. By doing so the phone went of, But does not come on agian. The red light flashes ans flashes and....... ya.... Anyway, then it goes on and of and on and of............ Hoe can i fix this??????
    I only had the phone for a couple of hours, after Vodacom gave me 1 back, because my prevoiuse one kept on taking green photos. That one i only had a week..... sooooo i waited 3 weeks for the other one to arrive, and now this... is it just a BALCKBERRY RED CURVE giving this problems or what. Non of my friends has a red, and theirs are working PREFECT. 2nd unit had a sticker at the back - " REFURBISHED UNIT"
    Please let me know if this is a commen issue so that i can cancel this contract and get another colour, or if its just my bad luck .
    Oh, and in your time zone you did not have South africa... we are GMT + 2.00
    Regards
    Leoumé

    Hey leoume,
    Welcome to the forums.
    This sounds like a software issue. Try following the instructions in this article to reload your software when the device is not detected. http://bbry.lv/lrnBzB 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Is it still impossible to do bootcamp and VMWare or Parallels?

    I use bootcamp extensively to run several windows programs, mostly MS Office 2010. I also need to use Office 2011 so being able to switch back and forth between OS X and Win 7 is essential (I do this because I'm a consultant and curriculum developer-

  • Question on internal table logic..

    Gurus, I have a internal table as follows: it_tab: ID---ACTION---CHANGE A1-----X-- B2---- U C1-----X-- U C2-----X-- Without looping at the table, how can I find get the result that the internal table has 3 ids with ACTION ='X' and 1 ID with ACTION  =

  • What is SQL 2000 mode in SQL 2005 Server?

    I have a application which will work in SQL 2000 (literally). I am upgrading my SQL server to 2005 from 2000. I want to know how to make SQL 2005 to function as SQL 2000 so that my application will continu working with 2005 too..? In other words wher

  • Aging of Batches

    Hi Experts, Can I have a query to age batches thru admission dates? Dates will be 30, 60, 90 and 120+ days. Parameters will be aging date Many thanks, Don

  • Keep header row always in view

    I know this must be easy, but I couldn't figure it out. Can anyone tell me how to keep the top row always in view for a very long document? Thanks!