My E5 not performing well

Dear
I have purchased E5 mobile last 5months back, i have enfough memory in Phone morethan 3MB but the its asking delet some data from phone memory b'coz memory low
pls advise me how how to addrees
santhosh

Please see these threads for suggestions:
/t5/Eseries-and-Communicators/e5-Memory-Full/td-p/780338
/t5/Eseries-and-Communicators/Nokia-E72-log-file-on-phone-memory-increasing/td-p/615813
The fix isn't necessarily straightforward, but hopefully the above will help.

Similar Messages

Dell Studio 17 Graphic Card is not performing well, Can I update the driver

I just purchased Dell Studio s17-169B. The graphic card in this laptop is Intel Graphics Media Accelerator 4500MHD. However, when I check graphic driver through device manager, I have found that driver is for Mobile Intel 4 series express chipset family with version 7.15.10.1576. My question is: can I download Dell Studio 1737 Intel Mobile Graphics Media Accelerator 4500MHD Driver A03 to update my current gtaphic driver so that the graphic display can be improved? Otherwise, I may return this laptop back to Bestbuy. Thanks for your input.

Define "not performing well"...
If you're playing 3D games, you will find that the 4500MHD is going to be lacking in general regardless of the driver installed. Any Intel GMA series integrated graphics solution is going to be at the bottom of the barrel in terms of 3D performance. In most cases, the only thing worse than a GMA series accelerator is an older GMA series accelerator.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

I purchased iphone 4s 32 gb in oct 2014 still battery not performing well

i purchase iphone 4s 32gb in oct 2014 but still battery not performing well,i stop already all app n also wifi off,brightness down,vibration mode off but i am still failure

Where have you tried to get help?
basics from the manual are restart, reset, restore.
If that fails, then make an appointment at the genius bar.

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

Reports not performing well

Hi all,
I used to have a RPD & Webcat in windows server 2008 environment. Reports used to perform well and retrive data fast. Recently it was moved to linux machine. The perfomance was badly degraded. Reports not retrieving fast. They are dead slow.
Linux Machine has 8GB RAM, and Windows has 16GB RAM. Can it be one of the reasons?
Where all areas I can check to let the linux machine perform well?

Hi, thank you so much for the reply.
Could you please tell me how can I increase the Heap Memory size?
And also one more question is that, when want to look at the query that is getting generated from Manage Sessions it is telling No Log Found. Could you please tell me why is this happening?

How do I get refund for App not performing well? Report problem link takes me to these discussion boards

I downloaded this App for ringtones (Ringtones 500.000) , purchased a full version of it, so I should be able to download unlimited number of ringtones. The problem is, it won't let me download any ringtones after 10, which is how free version of this App performs.
I have contacted developers, but they keep sending the instruction book to me with step-by-step inforamtion, which is out of date itself, but that is not a problem, I think in my case.
When I try to report a problem to Apple , using hte link on my receipt, it just takes me to a page with discussion boards and FAQ.
I would like to get $1.99 back instead of troubleshoot this any longer, because it seems App help support people are not understanding the problem.
I did try re-loading the App -didn't help either.
Thank you!

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.

Kernel regression : iwl-legacy/4965 not performing well with 4965AGN.

Hey guys I just updated the kernel26 package via pacman not too long ago and noticed after upgrade I had worse than usual wireless performance.
I upgraded from 2.6.38-ARCH to 2.6.39-ARCH.
Heres an output of iwconfig :
wlan0 IEEE 802.11abgn ESSID:"MySSID"
Mode:Managed Frequency:2.412 GHz Access Point: MyMac
Bit Rate=24 Mb/s Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=55/70 Signal level=-55 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:5 Invalid misc:33419 Missed beacon:0
I notice that there is a large Invalid misc value and the connection even had a couple of Tx excessive retry errors, I also notice that my wireless bandwidth is quite weak (I had a G rate of 54 Mb/s pre upgrade). I used speedtest.net to check my internet speed and noted that my connection speed had halved (7 mbit as opposed to 15).
Oh and if this helps here is an output of dmesg |grep 4965 :
[ 5.842556] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 5.842578] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 5.842580] Registering 4965 rate control operations
[ 5.842643] iwl4965 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.842651] iwl4965 0000:03:00.0: setting latency timer to 64
[ 5.842678] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 5.915174] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 5.915192] iwl4965 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 5.915451] iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X
[ 6.017997] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[ 6.401528] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
and an output of lspci | grep 4965 :
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
I connect to my network with WPA2(AES) encryption and I'm using NetworkManager for my networking management.
If theres any other info that I should share to help solve this problem please let me know.
(P.S. I'm a new convert to Arch and I've been finding it great!)
-MDstr
Last edited by MDstr (2011-06-13 13:43:24)

djpohly wrote:qelo: what kind of card do you have? Maybe we have a different problem from the OP...?
I have 4965AGN. I can use wifi if I have very good link quality but even then I have many "Tx excessive retries" and "Invalid misc".
$ uname -r
3.0.0-rc3-mainline
wlan0 IEEE 802.11abgn ESSID:"x"
Mode:Managed Frequency:2.427 GHz Access Point: xx:xx:xx:xx:xx:xx
Bit Rate=13 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=37/70 Signal level=-73 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:12688 Invalid misc:27437 Missed beacon:0
[ 13.522300] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 13.522369] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 13.522503] iwl4965 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.522603] iwl4965 0000:04:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 13.561536] iwl4965 0000:04:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 13.561613] iwl4965 0000:04:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 13.989978] iwl4965 0000:04:00.0: loaded firmware version 228.61.2.24
[ 151.653373] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[ 155.353370] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[ 276.389009] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 1
[ 1190.419959] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 6
[14916.337475] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[17726.030890] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 0
[21043.402115] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 1
[22137.197869] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 6

GTX 770 in Premiere Pro 5.5 not performing well.

I bought a GTX 770 to improve the mercury playback performance in Premiere Pro 5.5. So far I see no improvements at all over my previouse 9600 GT card. Am I wasting my money and should I send it back, or are there some settings that I´m missing? I have added the GTX 770 to the cuda supported card list and switched on mercury playback in Premiere. I have also checked that cuda is enabled for Premiere Pro in the Nvidia control panel.

cinemaor wrote:
I have this setup:
CPU: i7 920, 2.67GHz
Ram: 12Gb
HD: SSD
I guess, from what I can read of the table I belong in the GTX 650 segment, so I´m not that much of. Anyway after reading the link John posted it cleared up a couple things for me. CUDA only accelerate some effects while I thought it would enhance everything. I tried putting Magic lantern 5D3 raw footage in the timeline and was hoping it would play smoothly. I was also hoping the dynamic link from after effects would perform better with nativ 5D3 HD material.
The slow CPU (unless heavily overclocked) and the low amount of RAM are your two bottlenecks. In addition, the version of Magic lantern you used might not support GPU acceleration in Premiere Pro CS5.5 (if it doesn't, then the renders will be entirely in software-only mode).

ATI Radeon 9600 graphics card not performing well-fix or upgrade?

In my PPC Dual G5 I have the ATI Radeon 9600 XT. In trying to use Keynote's QuickTime export I encountered severe lag problems. part of this is how Keynote handles the QT export, and part is due to the Radeon (I've been through lots of technical troubleshooting on the Keynote Apple forum on this.) The current recommendation is to use Snapz Pro to do a screencast of the presentation. I ran into out-of-sync issues with this file, and sent a test off to Ambrosia (makes of Snapz Pro). He reported that it was my video card, and that it output fine on a current MB Pro.
I have checked the ATI/AMD website and called their TS. They consider the G5 installed card to be OEM, and there is no driver update for it. There isn't one on the Apple site either. Is there an easy SW test to see if the Radeon has had some sort of performance degradation issue? The Ambrosia tech said I should be getting better performance with it.
Any insight to this? If I do have to upgrade the card, what is the best current match for the G5?

In my PPC Dual G5 I have the ATI Radeon 9600 XT. In trying to use Keynote's QuickTime export I encountered severe lag problems. part of this is how Keynote handles the QT export, and part is due to the Radeon (I've been through lots of technical troubleshooting on the Keynote Apple forum on this.) The current recommendation is to use Snapz Pro to do a screencast of the presentation. I ran into out-of-sync issues with this file, and sent a test off to Ambrosia (makes of Snapz Pro). He reported that it was my video card, and that it output fine on a current MB Pro.
I have checked the ATI/AMD website and called their TS. They consider the G5 installed card to be OEM, and there is no driver update for it. There isn't one on the Apple site either. Is there an easy SW test to see if the Radeon has had some sort of performance degradation issue? The Ambrosia tech said I should be getting better performance with it.
Any insight to this? If I do have to upgrade the card, what is the best current match for the G5?

Battery is not performing well

my battery life is not 8 hours its life span is less than so how can i get more life spanned battery

Yes, It's a fairly simple replacement.
http://www.ifixit.com/Device/MacBook_Air

Query not performing well

Hi,
We are trying to load data from R/3 46c to BW31. This load takes no more than 2 hours max generally. At times we have noticed that it takes exceptionally more time like 10-12 hours . .
On checking I found that it generally gets stuck like in COVP . .though it keeps on reading thru this . . but is takes lot of time . program which it uses is SAPLBWOMR
and the query is given below. How to tackle this . .we tried identifying where there is some contention because of which this is happening . but no luck . .All the indexes for the tables behing this view are standard ones . .
SELECT
"BEKNZ" , "BELNR" , "BELTP" , "BLDAT" , "BUDAT" , "BUKRS" , "BUZEI" ,
"FKBER" , "GJAHR" , "GKOAR" , "GKONT" , "GSBER" , "KOKRS" , "KSTAR" ,
"KWAER" , "MATNR" , "MEFBTR" , "MEGBTR" , "MEINH" , "OBJNR" , "OBJNR_N1" ,
"OWAER" , "PAROB1" , "PBUKRS" , "PERIO" , "PERNR" , "PFKBER" , "QMNUM" ,
"SGTXT" , "TWAER" , "VERSN" , "VRGNG" , "WERKS" , "WKFBTR" , "WKGBTR" ,
"WOGBTR" , "WRTTP" , "WTGBTR"
FROM
"COVP"
WHERE
"LEDNR" = :A0 AND "OBJNR" BETWEEN :A1 AND :A2 AND "WRTTP" IN ( :A3 , :A4 ,
:A5 ) AND "TIMESTMP" BETWEEN :A6 AND :A7 AND "MANDT" = :A8#

Hi Vijay
Contact with your basis team and try to find out the stastics of the table which your using ..
1)Ask them to run Compute build stastics on this table
2) Check the distinct values for the columns.
your basis team will be having the idea about the above mentioned things ..check with them..
bye
Shu Moh.

Muse Site not performing well on Apple devices

Dear Muse enthousiasts,
I recently made my first site for a customer in Muse: http://www.mentinkhairstyle.nl
Everything seems to work ok on most devices, except for apple stuff. I got several reports of issues on iphones and ipads. Android and Windows show the site correctly.
The most prominent issues I bump into are bad scrolling and problems with the typekit font which is used on the site.
The effects I used in the site are motion scroll and opacity.
Any suggestions that lead to solving the problems are welcome! If you need me to provide any related files, please ask me!
Thank you all in advance!
Tamás

Hi Tamas
I checked your site in iPhone, iPad,Google Nexus and Android phone.
The scroll with text works fine as the opacity changes with scroll of page.
Please provide more details as if any specific browser or device is used.
Also if you can upload screenshots , then it would be help.
Thanks,
Sanjit

Time Machine does not cope well with nearly-full disk

Although Time Machine is supposed to delete old backups when the disk fills up, under some circumstances it does not cope well with a disk-full condition.
Hardware: iMac (mid 2007)
OS: Mac OS X version 10.6.8 (Snow Leopard)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 2 GB 667 MHz DDR2 SDRAM
The other day I noticed that I had not had a successful Time Machine backup in over a day. Backups were taking a long time to run (4 hours or more), during which time the backup disk was chattering constantly and the disk showed "Estimating index time" in the Spotlight menu (even though I had excluded the disk from Spotlight indexing). When the disk finally stopped chattering, the backup finished with no visible errors but Time Machine continued to state that the last successful backup was yesterday. The backup disk was nearly full, but I had assumed that Time Machine was designed to cope with this situation by deleting old backups.
A complete annotated log file of the incident and my observations can be found here: http://bentopress.com/backup.log.zip
Here are some of the interesting entries from the system.log file:
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Starting standard backup
Sep 7 16:22:14 Bento-iMac com.apple.backupd[56515]: Backing up to: /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:23:07 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 137.2 MB available
Sep 7 16:25:49 Bento-iMac com.apple.backupd[56515]: Copied 32984 files (23.7 MB) from volume iMac HD.
Sep 7 16:25:53 Bento-iMac com.apple.backupd[56515]: No pre-backup thinning needed: 100.0 MB requested (including padding), 108.4 MB available
Sep 7 16:25:57 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:25:58 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:25:58 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk
Sep 7 16:25:59 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:00 Bento-iMac KernelEventAgent[47]: tid 00000000 type 'hfs', mounted on '/Volumes/My Backup Disk', from '/dev/disk1s3', low disk, very low disk
Sep 7 16:26:00 Bento-iMac mds[45]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/My Backup Disk" because it is low on disk space.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Reindexing /Volumes/My Backup Disk/.Spotlight-V100/Store-V1/Stores/35367D91-8096-4D43-802B-A8658DBAB581 because no basetime was found.
Sep 7 16:26:02 Bento-iMac mds[45]: (Normal) DiskStore: Rebuilding index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:04 Bento-iMac mds[45]: (Normal) DiskStore: Creating index for /Volumes/My Backup Disk/Backups.backupdb
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Error: Flushing index to disk returned an error: 0
Sep 7 16:26:14 Bento-iMac com.apple.backupd[56515]: Copied 776 files (17.3 MB) from volume iMac HD.
Sep 7 16:26:15 Bento-iMac com.apple.backupd[56515]: Backup canceled.
Note the "error: 0". Error code zero normally indicates success.
There were also many, many, many copies of the following message, which occurred while Spotlight was trying to index the backup disk:
Sep 7 17:28:40 Bento-iMac com.apple.backupd[58064]: Waiting for index to be ready (100)
Here's what I think is happening: at the very end of the backup, after the files have been copied to the backup disk, mds resets indexing because the disk is now full. backupd's attempt to flush the index to disk then fails because indexing is suspended (error zero), so the backup is canceled. I suspect that this may occur when the new backup and the old one(s) being deleted are both small enough that the disk "packs" tightly, leaving no room for the index. If a large (>500MB) old backup had been deleted to make room for a small (<100MB) new one, the problem would not have occurred.
I worked around the problem by switching Time Machine from the full disk to my Time Capsule. (I did not have this system backing up to the Time Capsule originally because I purchased the Time Capsule later for a different system.) The downside of this is that I lost access to older backups (though they are still accessible by right-clicking on Time Machine in the dock and selecting "Browse other Time Machine disks..."—however, I have not actually tried this). I'm also not completely happy having both my main systems backing up to the same hardware, but everything seems to be working well at this point and I do have a secondary backup system, using SuperDuper to clone the systems' disks to an external HD, which I do about once a month.
Although I have worked around the problem, I am posting this in the hope that it will be useful to someone else, in the hope that someone at Apple will notice and perhaps improve the performance of Time Machine in this situation, and also in the hope that someone can suggest a solution that does not involve throwing a bigger disk at the problem. Is there any way to free up space on Time Machine's backup disk, for example by manually pruning older backups, either through Time Machine itself or via the Finder or command line?

If you suspect that the disk being full is the problem, have you tried deleting some of the old backup data on the TM disk?
When in TM, go back to the past a long way, right click on a file/directory and select "delete backup". Do this on some big files you have (so that you get more space per removal) that you change all the time (so you'll still have recent backups).

The backup was not performed because an error occurred while copying files

One Time Capsule, Two MacBook's, OS10.6.6
One MacBook can backup no problem, The other cannot backup says: the backup was not performed because an error occurred while copying files to the backup disk.
Using a Time Machine Buddy widget gives:
Starting standard backup
Attempting to mount network destination using URL: afp://Rachel%[email protected]/Data
Mounted network destination using URL: afp://Rachel%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data/Rachel Feuchtwang’s MacBook.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
No pre-backup thinning needed: 4.70 GB requested (including padding), 721.52 GB available
Indexing a file failed. Returned 200 for: /Applications/Dashboard.app, /Volumes/Time Machine Backups/Backups.backupdb/Rachel Feuchtwang’s MacBook/2011-01-12-115852.inProgress/F82EB140-616F-4213-9B4A-072C2C98B556/MAC/A pplications/Dashboard.app
Aborting backup because indexing a file failed.
Stopping backup.
Copied 5 files (84 bytes) from volume MAC.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Who would be so kind to point me in the direction to make thsi work again?
Thanks! Hugo

This could very well have to do with ACLs.
I bumped into the same problem:
5/8/11 10:43:22 PM com.apple.backupd[7126] Error: (-41) SrcErr:NO Copying /Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib/classes.nib to /Volumes/Local Backup/Backups.backupdb/Server/2011-05-08-221524.inProgress/88ACE716-0660-44C8- A128-CF01046FC2F8/Macintosh HD/Users/SA/Public/Drop Box/HandBrake.app/Contents/Frameworks/Sparkle.framework/Versions/A/ Resources/de.lproj/SUAutomaticUpdateAlert.nib
Using DD or CCC is no option for me, I don't want downtime and I want incremental backups. So I started to investigate.
I repartitioned my external Time Machine drive, did the backup again. It didn't work. Then I blocked the culprit file mentioned in the logs from being backed up with TM. That helped, only to find that a bit later it found another file with issues.
So i looked at the files an found they had ACLs on them that somehow prevented them from being copied.
SOLUTION:
remove the ACL from the file.
If you want to remove all ACLs in a directory, use Terminal and navigate to that directory. Then issue this command:
sudo echo | sudo chmod -R -E ./*
If you would like to remove ACLs from a single file or package (e.g. an application), issue this:
sudo echo | sudo chmod -R -E <nameoffile>
You might have to this several times since there might be multiple files affected. Unlike previous solutions, this one does not require you to delete the file.
I got the command to remove ACLs from http://osxadmin.blogspot.com/2008/01/chmod-acl-removal.html

Time Machine Backup Not Performed (OSX Server)

On a newly installed 10.6.4 OSX Server (MiniServer hardware), I am trying to do a Time Machine backup to a freshly formatted external FW drive (GUID Partition map). Whenever I attempt a first backup I get a dialog:
"The backup was not performed because an error occurred while copying files to the hard disk. The problem may be temporary, try again later."
Disk Utility can find no problem on the drive. Repaired permissions, and verified both disks (Boot and Data) to be backed up.
Yes, the server is running and AFP is on.
I excluded the boot volume from Time Machine, and the Data drive seems to be backing up fine- so it's only the boot volume that is having a problem.
Can the Boot drive of a server be backed up with Time Machine?
(Both drives get cloned every night, as well as Time Machine and offsite Retrospect backups.)
Thanks.

Gary Hobish wrote:
"The backup was not performed because an error occurred while copying files to the hard disk. The problem may be temporary, try again later."
See #C3 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum). It will show you how to locate the message(s) that describe the problem, then help you fix it.
If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.
Can the Boot drive of a server be backed up with Time Machine?
Yes.

My E5 not performing well

Similar Messages

Maybe you are looking for