My E65 is writting.... Start up failed, contact re...

my E65 is writting.... Start up failed, contact retailer.. What should i do? I just switched off my phone as i was about to switch it one it refuses and it was writting start up failed, contact retailer.. Im so so sad.. What should i do?
Solved!
Go to Solution.

Remove the battery for a couple of minutes..Insert and switch the device ON. If it still shows the same message, you need to visit Nokia Care ..

Similar Messages

  • 5800 xpressmusic: Phone start-up failed. contact t...

    Hi All,
    Please help me. I installed a new application and I was asked to restart the device but start up failed and ask me to contact the retailer. Your help is highly appreciated.
    Solved!
    Go to Solution.

    Solution given on that page is for a phone with keypad,
    For you;
    Press and hold "Green call button" "Red Button" "Camera button" and now power on the phone, keep those key pressed until phone is fully powered up. You'll loose ur data though.
    Good Luck.
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • E5 error" Phone start-up failed.Contact the retail...

    I tried installing a new email client  and ever since the phone is not booting its giving above error any clues how to install the OS again on E5 I ok with data loss thanks Matt
    Solved!
    Go to Solution.

    Sorry all options did not work,only Nokia care option worked since the phone was couple of days older than 1 year std warranty  with a price a tag also it seems just a Symbian OS install on the phone maybe there should be this option for normal users as well Hope this feedback is taken by Nokia to improve services 

  • N81 updated to v11 then saying start up failed!

    got my n81 today updated it from v10 to v11 now after that had finished its sayin start up failed contact retailer!?!
    now do i send it to nokia service centre? or can i fix it? i got it off ebay.. it was fine before the update :@
    not impressed!

    hi i have removed battery for a few minutes am leaving it out now for longer to try that,
    i have also tried the hard reset no luck there either
    memory card well ummm it doesnt have one its the n81 8gb
    i have tried taking the sim out and it worked in offline mode for a few seconds but flashed locked up a few times where o2 was before, now with or with out sim it gets half way through the nokia hands and flashes up 'phone start up failed contact retalier' as before at least it asked for my pin code then the message came up :@ stupid nokias!
    Message Edited by bbracer16valver on 03-Feb-2008 06:12 PM

  • N8: Phone Start-up failed. Contact your retailer!!...

    Hello Nokia,
    I just woke up to find this error on my N8 and now i can't turn on the phone bacuase after the Nokia Logo then this message comes "Phone Start-up failed. Contact your retailer". What should i do to get it back cos i can't do anything now since all my information is on my phone. 
    I wanted to even connect it to the computer and use it as a USB drive to get some of my info but the msg still appears.
    Pls help
    Kind regards 

    If your not getting to the homescreens then it's likely you have a very diferent issue to the one described in the post linked,
    If you get to the homescreens then it's likely either the nokia sign in thing or just too much starting at once that's hitting you,try putting the phone into offline mode before it comes up and letting it complete its boot,
    otherwise if it is happening at the nokia logo screen, then it sounds like something has gone badly wrong,
    if you are running anna then you may need to perform a multi fingered reset which will erase the data stored on the phone and restore it to an out of box state, before recovering from a back up that you have made previously,
    If that deosn't work then a trip to a nokia care point is your only course of action

  • SEVERE ERROR: Starting system failed, rc=0

    Hi Experts
                      I am having problem in SRM 2.0 to SRM 5.5(NW 7) Upgrade. I have problem in startup of Shadow Instance. Here is log description.
    more DEVTRACE.LOG
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 01] Wed Jan  9 17:56:30 2008
    [Thr 01] WLM Tag 'ED2/MSG' successfully set for this process
    [Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   324 (IBM RS/6000 with AIX)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, 64 bit, optimized
    pid        4722694
    *[Thr 01] **LOG Q01=> MsSInit, MSStart (Msg Server 1 4722694) [msxxserv_mt. 1824
    [Thr 01] SigISetDefaultAction : default handling for signal 20
    [Thr 01] load acl file = /usr/sap/put/ED2/SYS/global/ms_acl_info
    [Thr 01] MsGetOwnIpAddr: my host addresses are :
    [Thr 01]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 01] HTTP logging is switch off
    *[Thr 01] **LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
    p 3174]
    *[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8*
        (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:8100) [nixxi.cpp    3174]
    *[Thr 01] *** ERROR => MsHttpCommInit: Ni2Listen(8100) (rc=NIESERV_USED) [msxxhtt*
    p_mt. 3444]
    *[Thr 01] *** ERROR => MsHttpPortBind: MsHttpCommInit (port=8100) [msxxhttp_mt. 3*
    847]
    *[Thr 01] *** HTTP port 8100 state CLOSED ****
    [Thr 01] MsHttpOwnDomain: own domain[1] = ent.agt.ab.ca
    [Thr 01] ms/icf_info_server : deleted
    *[Thr 01] *** I listen to port sapmsSHDED2 (3605) ****
    [Thr 01] CUSTOMER KEY: >N1501146322<
    more STARTSFI.LOG
    1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080109175630")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPED2
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 ENV: dbs_ora_schema=SAPED2
    4 ETQ399 ENV: auth_shadow_upgrade=1
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX
    _SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2 ETQ353 Starting system
    4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/ED2/SYS/exe/run
    4 ETQ399 ext. env.: LIBPATH=/usr/sap/ED2/SYS/exe/run:/usr/lib:/lib:/usr/sap/ED2/
    SYS/exe/run
    4 ETQ399 2008/01/09 17:56:30: put_execute: (startsap) forkpid:9027768
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    4 ETQ359 RFC Login to: System="ED2", Nr="01", GwHost="iedm3330dd", GwService="sa
    pgw01"
    2 ETQ231 RFC Login failed
    2WETQ372 test RFC failed, rc="-2"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    2EETQ399 Dialogue: ERROR
    2EETQ399 Starting system failed, rc=0
    You help & time in this matter will be highly appreciated.
    Thanks & Regards
    Jignesh

    Hi Marcus
                     Thanks for quick response. I did same exercise earlier. Shadow Instance started without dispatcher.
    iedm3330dd:ed2adm>  ps -ef | grep ED2_DVEBMGS01
      ed2adm 4817018 7942216   0 09:16:45      -  0:00 ms.sapED2_DVEBMGS01 pf=/usr/s
    ap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
      ed2adm 4821170 7942216   0 09:16:45      -  0:00 co.sapED2_DVEBMGS01 -F pf=/us
    r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
      ed2adm 4849734 7942216   0 09:16:45      -  0:00 se.sapED2_DVEBMGS01 -F pf=/us
    r/sap/put/ED2/SYS/profile/ED2_DVEBMGS01_iedm3330dd
      ed2adm 4853912 8847520   0 10:01:29  pts/1  0:00 grep ED2_DVEBMGS01
    Log file :
    iedm3330dd:ed2adm> pwd
    /usr/sap/put/ED2/DVEBMGS01/work
    iedm3330dd:ed2adm> more  dev_disp.new
    trc file: "dev_disp.new", trc level: 1, release: "700"
    sysno      01
    sid        ED2
    systemid   324 (IBM RS/6000 with AIX)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      single threaded, ASCII, 64 bit, optimized
    pid        4853984
    Thu Jan 10 09:16:46 2008
    kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 4853984) [dpxxdisp.c   1239]
            shared lib "dw_xml.so" version 111 successfully loaded
            shared lib "dw_xtc.so" version 111 successfully loaded
            shared lib "dw_stl.so" version 111 successfully loaded
            shared lib "dw_gui.so" version 111 successfully loaded
            shared lib "dw_mdm.so" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    WARNING => DpNetCheck: NiServToNo(sapdp01) failed (rc=-3)
    ERROR => DpNetCheck: NiServToNo(sapgw01) failed (rc=-3) [dpxxtool2.c  5223]
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust t
    he DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >iedm3330dd_ED2_01                       <
    DpShMCreate: sizeof(wp_adm)             7488    (936)
    DpShMCreate: sizeof(tm_adm)             4957464 (24664)
    DpShMCreate: sizeof(wp_ca_adm)          18000   (60)
    DpShMCreate: sizeof(appc_ca_adm)        6000    (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548040/548048
    DpShMCreate: sizeof(comm_adm)           548048  (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0       (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)           0       (72)
    DpShMCreate: sizeof(vmc_adm)            0       (1616)
    DpShMCreate: sizeof(wall_adm)           (22440/36712/56/104)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY             (addr: 7000000000a6000, size: 5603560)
    DpShMCreate: allocated sys_adm at 7000000000a6000
    DpShMCreate: allocated wp_adm at 7000000000a7ba0
    DpShMCreate: allocated tm_adm_list at 7000000000a98e0
    DpShMCreate: allocated tm_adm at 7000000000a9940
    DpShMCreate: allocated wp_ca_adm at 700000000563e58
    DpShMCreate: allocated appc_ca_adm at 7000000005684a8
    DpShMCreate: allocated comm_adm at 700000000569c18
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 7000000005ef8e8
    DpShMCreate: allocated gw_adm at 7000000005ef968
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 7000000005ef998
    DpShMCreate: allocated wall_adm at 7000000005ef9a0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ERROR => DpIPCInit2: NiServToNo failed (--3) [dpxxtool2.c  511]
    DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jan 10 09:16:56 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)                        Thu Jan 10 16:16:56 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  Us
    er         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0        0                           
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0        0                           
    Dispatcher Queue Statistics                     Thu Jan 10 16:16:56 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c   1870]
    Dump of tm_adm structure:                       Thu Jan 10 16:16:56 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks                   Thu Jan 10 16:16:56 2008
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jan 10 09:17:01 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >iedm3330dd_ED2_01                       < (normal)
    DpJ2eeDisableRestart
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c      1228]
    ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c   10960]
    Stop work processes
    Terminate gui connections
    wait for end of work processes
    not attached to the message server
    cleanup EM
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ShmCreate( 76, 0, 2, 0x110750af0 )
    ShmKeyPermission( 76 ) = 0740 (octal)
    cleanup event management
    cleanup shared memory/semaphores
    ShmCleanup SHM_SYS_ADM_KEY
    ShmCleanup( 1 )
    ShmCreate( 1, 0, 2, 0xfffffffffffedf0 )
    ShmProtect( 1, 3 )
    ShmCreate( 1, 0, 2, -> 0x7000000000a4000 )
    ShmCleanup SHM_DP_ADM_KEY
    ShmCleanup( 2 )
    ShmCreate( 2, 0, 2, 0xfffffffffffedf0 )
    ShmProtect( 2, 3 )
    ShmCreate( 2, 0, 2, -> 0x7000000000a6000 )
    ShmCleanup SHM_DP_CA_KEY
    ShmCleanup( 3 )
    ShmCreate( 3, 0, 2, 0xfffffffffffedf0 )
    ShmProtect( 3, 3 )
    ShmProtect: shmat key 3 prot 3/0 done
    ShmCreate( 3, 0, 2, -> 0x700000030000000 )
    ShmCleanup SHM_PF_KEY
    ShmCleanup( 4 )
    ShmCreate( 4, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 4 ) = 0740 (octal)
    ShmCleanup SHM_PRES_BUF
    ShmCleanup( 14 )
    ShmCreate( 14, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 14, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_CALI_BUFFER
    ShmCleanup( 11 )
    ShmCreate( 11, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 11, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_DB_TBUFF
    ShmCleanup( 19 )
    ShmCreate( 19, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 19 ) = 0740 (octal)
    ShmCleanup SHM_DB_TBUFF_P
    ShmCleanup( 33 )
    ShmCreate( 33, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 33, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_DB_STBUFF
    ShmCleanup( 41 )
    ShmCreate( 41, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 41 ) = 0740 (octal)
    ShmCleanup SHM_DB_TTBUFF
    ShmCleanup( 42 )
    ShmCreate( 42, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 42, 0, 2, 0xfffffffffffec78 )
    Profile configuration error detected, use temporary corrected setup
    Shared Pool 40: ipc/shm_psize_40 = 68000000 (too small)
    Shared Pool 40: (smaller than default 112000000)
    Shared Pool 40: (default size assumed 112000000)
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_FTBUFF
    ShmCleanup( 43 )
    ShmCreate( 43, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 43, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_SNTBUFF
    ShmCleanup( 45 )
    ShmCreate( 45, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 45, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_IRBUFF
    ShmCleanup( 44 )
    ShmCreate( 44, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 44, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_OBJ_BUFFER
    ShmCleanup( 54 )
    ShmCreate( 54, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 54, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_DB_SYNC
    ShmCleanup( 46 )
    ShmCreate( 46, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 46, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_CUA_BUFFER
    ShmCleanup( 47 )
    ShmCreate( 47, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 40, 47, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 40, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_DB_OTR_BUFFER
    ShmCleanup( 64 )
    ShmCreate( 64, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 64 ) = 0740 (octal)
    ShmCleanup SHM_DB_ESM_BUFFER
    ShmCleanup( 65 )
    ShmCreate( 65, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 65 ) = 0740 (octal)
    ShmCleanup SHM_ROLL_AREA_KEY
    ShmCleanup( 9 )
    ShmCreate( 9, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 9 ) = 0740 (octal)
    ShmCleanup SHM_PAGING_AREA_KEY
    ShmCleanup( 8 )
    ShmCreate( 8, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 8 ) = 0740 (octal)
    ShmCleanup SHM_ROLL_ADM_KEY
    ShmCleanup( 17 )
    ShmCreate( 17, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 17, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_PAGING_ADM_KEY
    ShmCleanup( 18 )
    ShmCreate( 18, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 18 ) = 0740 (octal)
    ShmCleanup SHM_PXA_KEY
    ShmCleanup( 6 )
    ShmCreate( 6, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 6 ) = 0740 (octal)
    ShmCleanup SHM_ENQ_TABLE_KEY
    ShmCleanup( 34 )
    ShmCreate( 34, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 34, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_ENQID_KEY
    ShmCleanup( 58 )
    ShmCreate( 58, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 58, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_VB_ADM_KEY
    ShmCleanup( 7 )
    ShmCreate( 7, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 7 ) = 0740 (octal)
    ShmCleanup SHM_DB_POOL
    ShmCleanup( 40 )
    ShmCreate( 40, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 40 ) = 0740 (octal)
    ShmCleanup SHM_ES2_ADM
    ShmCleanup( 76 )
    ShmCreate( 76, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 76 ) = 0740 (octal)
    ShmCleanup SHM_EM_ADM
    ShmCleanup( 51 )
    ShmCreate( 51, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 51, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_EM2_ADM
    ShmCleanup( 77 )
    ShmCreate( 77, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 77 ) = 0740 (octal)
    ShmCleanup SHM_EG2_ADM
    ShmCleanup( 78 )
    ShmCreate( 78, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 78 ) = 0740 (octal)
    ShmCleanup SHM_MSBUF
    ShmCleanup( 52 )
    ShmCreate( 52, 0, 2, 0xfffffffffffedf0 )
    ShmProtect( 52, 3 )
    ShmCreate( 52, 0, 2, -> 0x700000000600000 )
    ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
    ShmCleanup( 30 )
    ShmCreate( 30, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 30, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_JAVA
    ShmCleanup( 70 )
    ShmCreate( 70, 0, 2, 0xfffffffffffedf0 )
    ShmKeyPermission( 70 ) = 0740 (octal)
    ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
    ShmCleanup( 56 )
    ShmCreate( 56, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 56, 0, 2, 0xfffffffffffec78 )
    ShmCleanup SHM_POOL_0
    ShmCleanup( 10 )
    ShmCreate( 10, 0, 2, 0xfffffffffffedf0 )
    ShmProtect( 10, 3 )
    ShmCreate( 10, 0, 2, -> 0x700000000000000 )
    ShmCleanup SHM_PROFILE
    ShmCleanup( 57 )
    ShmCreate( 57, 0, 2, 0xfffffffffffedf0 )
    ShmGet( 10, 57, 0, 2, 0xfffffffffffec78 )
    ShmCreate( 10, 0, 2, 0xfffffffffffea98 )
    ShmKeyPermission( 10 ) = 0740 (octal)
    MiCleanup:
    ShmCleanup( 62 )
    ShmCreate( 62, 0, 2, 0xfffffffffffed60 )
    ShmKeyPermission( 62 ) = 0740 (octal)
    ERROR => ShmCleanup(62) failed 3 [mpixx.c      3239]
    MpiCleanup() -> 1
    removing Semaphore-Management
    removing request queue
    ShmCleanup( 31 )
    ShmCreate( 31, 0, 2, 0xfffffffffffed70 )
    ShmGet( 10, 31, 0, 2, 0xfffffffffffebf8 )
    ShmCreate( 10, 0, 2, 0xfffffffffffea18 )
    ShmKeyPermission( 10 ) = 0740 (octal)
    ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c   431]
    closing connect handles (dgm + tcp)
    ***LOG Q05=> DpHalt, DPStop ( 4853984) [dpxxdisp.c   10631]
    shutdown completed - server stopped ***
    I have already requested for port entry change in services file.
    Jignesh

  • XL Reporter Start Up Failed - "Report Initialize" Description (667)

    Hi experts,
    I use SAP B1 2007 PL34. I'm trying to execute an XL reporter report and I got this message
    "An Error Occurred During The Process "Report Initialize". Description(667) metainfo.XML not Found! (Please contact the administrator to fix the repository connection) XL reporter Start Up failed"
    Afterwards the report open but had just the headers. I already searched through the forums but I only saw Description (666) errors, How can I resolve this ?
    Any help will be greatly appreciated.

    Hi,
    In order to resolve the reported issue, please try the following solution:          
    1. Please make sure that (a)Microsoft® .NET Framework 1.1 and (b) Microsoft® MDAC 2.7 or higher is installed in the machine, where you are running XL reporter if you have both .Net 1.1 and .Net 2.0 is installed then please refer to note no. 898635.                                                                               
    2. Once the error message popped up, please kill all processes of SBO and XLR, then restart. Try to see if the message still exists.                                                                               
    3. Goto Excel and check if the Macro Settings is correct as per note 853821.
    4. Check the authorization of the folder C:Program FilesSAPSAP Business OneAddOnsXLRXLReporter to see if users have right to edit document in that folder.
    5. If still you have the same issue, could you please copy a healthy Metainfo.xml from your workstation where the XL reporter is working fine to the workstation where you are facing the issue. After modifying the Database info in the Metainfo.xml file, execute XLR again.
    Note: The Metainfo.xml file should be available in the following location :
    C:Program FilesSAPSAP Business OneAddOnsXLRXLReporter.               
    hope it helps,
    Regards,
    Ladislav
    SAP Business One Forum Team

  • The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator.

    Hi,
    I'm not able to access the term store. I get an below mentioned error.
    "The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
    Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
    Hence, this is not a permission issue.
    I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
    After reading one of the recommendation on internet, I created a new Managed Metadata Service.
    After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
    Now again its not working after I did an IISRESET.
    The managed metadata service (Managed Metadata Service Connection) is grayed out.
    ULS Error says:
    Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
    value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
    timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
    Please let me know if you need more information.

    Hi Victoria,
    Thanks for your reply
    I tried making all the changes you had recommended and which are mentioned in the link you have provided.
    I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
    One thing is that, my error in ULS logs has changed.
    Error 1: 
    Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
    to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
    Error 2:
    Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
    allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
    The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out 
        at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) 
        at System.Net.HttpWebRequest.GetRequestStream() 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()     --- End of inner exception stack trace --- 
        at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() 
        at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout) 
        at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)     --- End of inner exception stack trace ---    Server stack trace:  
        at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)     at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) 
        at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) 
        at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:  
        at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) 
        at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) 
        at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b() 
        at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a() 
        at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId) 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings() 
        at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges() 
        at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0().

  • Nokia C7 Phone Start-Up Failed

    A good friend of mine has a Nokia C7.  He and I both used to use SPB Mobile Shell, but I no longer do.  However, my friend is still using the SPB software.
    Sometimes when my friend turns on his phone, the usual Nokia information appears, then the "loading" message that SPB is being loaded, and then he gets a message:
    Phone Start-Up Failed.
    Contact the retailer
    From searching the forums, I'm pretty sure this is a Nokia message, and not something from SPB.
    People suggested removing the memory card, but this phone doesn't have a memory card.
    Other people suggest a "three-finger reset".
    I have just asked my friend to remove the battery for a few minutes, then re-start the phone.  I don't know yet if this will help. 
    My next option would be to remove the SPB software, but from what I'm reading, this is not likely to be the problem - and my friend still relies on the SPB Mobile Shell for daily use.
    My last option is the three-finger reset.  What they suggested was "Hold Menu Key,Volume Down Key,Camera Key and press the switch on button (power button) and when your phone vibrates release the switch on button (power button) and keep holding the Menu Key,Volume Down Key,Camera Key and wait for a while and your phone will be as good as new".  If I do the three-finger reset, is this going to remove all the data on his phone, so I need to set everything up for him again? 

    My C-7 has the same problem. I'm not surprised since thousands of this handset (along with the N8) are also affected.
    This is a design-defect problem that NOKIA recognizes but refuses to address properly   By purchasing this handset we have all thrown our money to the winds. We are not alone; Considering NOKIA's current stock price nose-dive, the company's shareholders are in the same boat.
    This is an absolute travesty. Were it not for NOKIA's "killer application" (its off-line turn-by-turn mapping program, of course), I would have jumped ship long ago. Although I feel very sorry for myself for having bought such a problematic device, I feel much worse for the employees of NOKIA (at least for those who still remain employed after the recent mass purgings in a desperate attempt by the C-levels to keep the company afloat). Surely they must also be able to see the writing on the wall indicating that their time is nearly up  The company will go under.
    Horrible product quality, arrogant refusal to properly address the defects, oblivious attention to the market and an unfathomable and highly misguided sell-out to Microsoft has turned this once great company into a puddle of mush, slowly seeping into the cracks of the floor over which Samsung and Apple now gleefully dance.
    Shame, Nokia. Shame.
    * By the way: If you want to breath life back into your C-7 or N-8, charge the beast and then place it into the freezer for a few minutes. Since the root problem is due to overheaded boards, this action will quite surprisingly, cool the unit back down to whence it will once again start. 

  • Nokia 7610 'phone start up failed'

    hi all,i have just purchased a nokia 7610 2nd hand.on start up of phone it comes up 'start up failed plesae contact retailer'ive tryed formatting it with a code i got of this site,it worked for a while then went back to normal.i dont know if this is any thing to do with a file called 'caribe' which was installed in my phone,but now disapearred.any help please drop me a line,thanks

    04-Apr-2006
    06:58 PM
    leedash wrote:
    hi i can tell you the code but i dont htink it will help.its only useful for re-formatting your phone,well here it is-hold down green,star and 3 buttons,then switch on your phone if done right it will say 'formatting' on screen.i dont think this will solve problem it sounds like it needs flashing software.good luck
    Just like to say thank you for the key combination for formating the 7610. My 7610 froze few days ago. Asked local phone shop to re-flash software to get it goin again and it didna help. The code of green button, star and number 3 and powerin on worked a treat. So thanks to the genius who found it.
    Jason

  • E65 could not start after installed new firmware

    Hi,
    Yesterday I conected to PC suite and updated firmware from 2.0.... to 3.0... > Everything went through smoothly. After I restored all information from back up files of PC suite, then I could not use my phone any more. Everytime I try to restart my phone, the message " Phone start-up failed. Contact to retailer "
    Could any one help me to make my phone back to work, please ? Thanks a lotttttt

    See this.
    /discussions/board/message?board.id=communicators&​thread.id=31577

  • Nokia n8 startup failed contact retailer

    Hi ive had the Nokia n8 for a year and ive hated every single day of that year...... the nokia n8 is THE most problametic phone ive ever had.... and will be my last ever nokia phone.  no matter what i do i get the nokia startup failed contact retailer.  yes ive restarted my phone at least 100 times ...... yes i literally restarted my phone 100 times no exagaration.......... my phone will start up like usual ..... then after a while it will give me the nokia n8 startup failed contact retailer is there any way to get this fixed without having to reset the whole phone to factory settings??? .......... ive been able to bypass the startup failed contact retailer by quickly quickly clicking on the small button on the left that then gives me the menu with all my applications but realisticly i shouldn't have to go through all the work to get my phone up..... can someone help me????
    Solved!
    Go to Solution.

    Hello suske423, I also faced the same problem and after doing the three finger format my phone's working fine. So no other option other than format.
    Nokia C7

  • N8 Phone start up failed error message

    hi geniuses of N8 users. May i ask why my N8 is always showing"Phone start-up failed. Contact retailer." everytime it's low on battery. I need to shut it off and on  plenty of times and pray that it wont be in the screen. What to do?
    And, how do i connect it to a TV to view my videos using the HDMI cable?
    Thanks a bunch! Really appreciate it.
    Moderators notes: Thread heading amended to reflect the nature of the post.

    lylalue8 wrote:
    How do I connect it to a TV to view my videos using the HDMI cable?
    What is the issue here, although you do need to press plugs in firmly?
    Np clues as to what region you are using device although somne users may have to change PAL to NTSC in Settings > Phone > Accessories > Tv-out.
    Happy to have helped forum with a Support Ratio = 42.5

  • Start-up failed after software update

    Hi,
    I have N73. I decided to update the software today. I downloaded the new Nokia Software Updater, connected the phone by USB and process has started. Everything went fine, phone has been updated successfully. But when I tried to switch it on the message appeared on the screen - Phone start-up failed. Contact the retailer. I used v1.3.95 en Software Updater. I do not remember what software version did I have, it began from 3..... and the new software was 4........ Last time I updated the software everything was fine. I think this is the problem with the new software.
    Could you advice please?
    Thank you

    22-Sep-200704:38 AM
    griellwe wrote:
    Thanks. I returned phone to Nokia repair centre and it should be repaired in 28 days.
    My goodness, 28 days is forever. Do they loan you a replacement phone or something?
    I don't get a replacement phone here. I'm already unhappy if it takes 2 days to repair.

  • E50 in USA - Phone Start-up Failed error

    Hey all,
    I'm in the US, and I've had my E50 for a couple years now.  Well, my phone randomly crapped.  It wouldn't turn back on (battery had some juice left), so I pulled the battery out and let it sit for about 20 min.  It booted back up only to display the "Phone start-up failed. Contact the retailer." error.
    So, what are my options here?  I have contacts that I don't want to lose, but I can't get to the dialer to do a soft reset.  Is there any other way to do a soft reset?  I tried to even do a hard reset (i know i'll lose everything) using the 3+*+GREEN CALL button combo to go to the format screen, but it does nothing.
    I also tried to get the phone to connect using PC Suite, but the computer/app don't find the phone.
    Anyways, in the US, there are no care centers that support the E50, as it never hit the market here.  What are my options here?  How can I even get this to a Nokia repair center?
    Really sucks because I've been waiting for the N97 to come out :-\  I haven't backed up my contacts in a year, and I would love to NOT lose these.  Is there any way to pull these contacts off the phone without actually getting on it???  They were saved to internal memory :-\
    Thanks,
    TJ

    lylalue8 wrote:
    How do I connect it to a TV to view my videos using the HDMI cable?
    What is the issue here, although you do need to press plugs in firmly?
    Np clues as to what region you are using device although somne users may have to change PAL to NTSC in Settings > Phone > Accessories > Tv-out.
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for