My E71 didn't startup after the last update!

I updated my E71 today. This isn't my first time. What happened today as usual after completing the update. It says startup your phone. I tried several times but it didn't startup the only thing is gives is the keypad light, it turn on like twice then it stopped.
If any one can help me in this I would be grateful.

try the last option with phone turned off. if this does not work your only option is to take it to nokia care for service. 
 With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • My MacBook didn't work after the last update OS 10.7.2

    I have MacBook Pro, i5 dual core 2.4. Just bought it yesterday and updated the OS to 10.7.2. after the update by less than tow hours, the mac shutdown and didn't work and not accepting the charger also!
    Please guide me what to do with this issue

    Bring it back to the store you bought it from. You are under a 1 year warranty.

  • Why am I getting a pink apple logo on startup after the last Mavericks update?

    After the last update for the OS (not Safari)
    When my MacBook Pro starts up it shows the regular apple logo
    after that the screen becomes black for less than a second
    and then the logo is pink
    I guess this has to do with a driver issue

    Try resetting PRAM.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Best.

  • Why do the tabs now have multiple favicon images showing after the last update?

    The last update to Firefox has created a problem with the tabs. The tabs now have multiple images of the websites favicon showing. When I open a tab and go to a website, when the favicon shows it will then create multiple images of that favicon. When I click off the tab and back on it, they disappear but this obviously should not be happening and didn't start until the last update was installed. I even did a Refresh and that didn't fix the problem. I tried to upload an image but the area just has a spinning wheel and the image size was only 5.41kb. Apparently that isn't working so well either. It appears Mozilla Firefox has created some bugs for it's browser and help forum.
    If anyone knows how to fix this or to get Mozilla to fix their problem, it would be appreciated. Thank you!

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • After the last update on Mac os 10.9.2 end of April - I

    After the last update on Mac os 10.9.2 end of April - I opened Pagemaker and my whole system crashed after talkign with Apple, I had to erase everything on my hard drive.  I finally got it fixed and re-installed pagemaker cs5 and a few other program that I HAD to have while I was on vacation.  When I got home, I tried installing CC and various programs (pagemaker, indesign, photoshop etc. Had to erase all of the other adobe programs and start from scratch.  Every time I open ANY adobe products all of my "white space" is pink and white vertical striped in EVERY program. Apple mail, contacts etc.  If I completely shut down the computer and then restart everything is fine until I open an adobe product again.  I can't seem to get any help out of Adobe, does any one have any suggestions before I cancel my subscription entirely?
    Thank you in advance,
    Janie

    You may need to ask for help in the individual program forums
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

    Anything known on this issue? Solutions? Even importing files from memory card is a problem.
    In import window images are not diplayed as images but all the same blue mini images.
    vertical files are changed into landscape positions and more. Mac version.
    cj de vries

    Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
    Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
    created by Yammer in Bridge General Discussion - View the full discussion
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Bridge General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
    THNX Problem solved

  • I have lost some of my bookshelfs after the last update!

    I have lost some of my bookshelfs after the last update and cannot create a new one. How can I fix it? I don't have them on my PC so I can't synchronize them. What can I do? Pretty dissapointed right now!

    If the contact were added after the backup was made they will not be in the backup. If your contacts were synced with iCloud they may be there. If so they will apear shortly on your new phone.

  • After the last update(7.1.2) i couldn't find personal hotspot in my iPad 2.

    after the last update(7.1.2) i couldn't find personal hotspot in my iPad 2 Wifi+Cellular. I did everything like reset network setting, restore to factory setting and set up as a new iPad but no change. My iPhone 5's carrier is 16.2 and after update to 7.1.2 it automatically ask me for carrier update but my iPad 2 ask nothing and the carrier is 16.1. Please, help me to solve this problem.

    The Personal Hotspot feature is not available on the iPad 2. I have no idea how you could have been using it before as you claim. BTW, your screenshots do not show up.
    System requirements
    The table below lists the iPhone and iPad (Wi-Fi + Cellular models) capable of Personal Hotspot and which connections they can use to share cellular data with another device:
    USB
    Bluetooth
    Wi-Fi
    iPhone 4 or later



    iPhone 3GS and iPhone 3G*


    iPad (3rd generation or later) Wi-Fi + Cellular



    iPad mini Wi-Fi + Cellular



    * On iPhone 3G, Personal Hotspot is referred to as Internet tethering.
    To connect to a Personal Hotspot, your device requires:
    Wi-Fi: Support for 802.11g/n using WPA2 encryption.
    USB: Mac or PC with iTunes 9.2 or later installed.
    Bluetooth: Mac OS X v10.4.11 or Windows.

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

    After the last update is no longer contact to the internet or to whatsapp? What can I do with my iphone 5?

    No internet access when connected to an available wi-fi network and the same when connected to your carrier's cellular network, or when connected to your carrier's cellular network only?
    Any error message provided?

  • After the last update of itunes I seem to have lost all my music (Cds that I had downloaded into itunes) except the once I had purchased from the itunes store. Can anyone help? Do you know what might have happened?

    After the last update of itunes I seem to have lost all the music that I had downloaded from my Cds. It was a lot of music! All I still have is the music that I had purchased in the itunes store. And before you asked. No, I did not have a backup. Never got around to do it.
    Does anyone of you have an idea if and how I can maybe get my music back?
    Your help is very much appreciated. Would it help if I recover my computer from an earlier date?? I am not even sure if I make sense here.

    Hi - I seem to have a similar problem. I was prompted to update to iPhoto 11 yesterday (don't know why yesterday, I'm in iPhoto all the time). So I followed the instructions, library updated, all existing events and albums are there. I uploaded some more pictures and created a few new albums and did some new year spring cleaning, moving stuff around etc. And I started making a calendar.
    I've opened it up today, my calendar is still there as are all the new events, but the pictures are empty outlines. If I open up a picture I just get the "!" but I can still see the thumbnails showing in the slider in the bottom - I don't know if that means the source files must still be there somewhere, or if it just means it captured thumbnails yesterday.
    I've gone into it via "show package contents" and there just don't seem to be any masters for an upload yesterday. I also just had a look in the last import folder, because of a comment from someone above. As I scrolled down through the folder the images were there and literally disappeared in front of me - by which I mean, the thumbnails were there as I scrolled down and then would turn into empty outlines...!
    All my old folders are still there, thankfully (although they're of course the ones that are also all safely back up).
    Although I have a timecapsule, my photo library is too big to keep on my hard drive, so I keep it on an external drive - so it only gets backed up when I do it manually (thanks Apple for that, I will never understand why it was designed to work - or not work - that way). So if the pictures have been lost then they are gone for good which is super-frustrating (I just got back from South Korea and was in the middle of sorting out all my shots from that trip).  It seems that this can only have happened because of the update - I should have known better than to have pressed yes.
    If you have any ideas, I'd be most grateful!
    Regards
    R

  • Why MLB.TV is not appearing after the last update?

    why MLB.TV is not appearing after the last update?

    Make sure the store is set to the US.. Also restart the ATV.

  • After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

    After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer.  A message pops up asking if I want to run repair.  Answering in the afirmative results in another message stating files are missing.  And we are back at square one.

    What is the exact error?  Else you could always reinstall your software.

  • After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

    After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

    ''Attaboyslim wrote:''
    I am locked into firefox.
    If nothing happens when you press the F11 key, check if you have the same problem in Safe Mode.
    * [[Troubleshoot Firefox issues using Safe Mode]]
    ''Attaboyslim wrote:''
    I'd like the old browser please.
    * [[How to make the new Firefox look like the old Firefox]]

  • After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    After the last update I lost a lot of documents I had edited and saved in my tablet. Any option to recover them? Now I can only access the documents of the cloud.

    Hi,
    Please take a look at one of the following documents to see if it answers your question about finding the files that are locally stored on your device.
    For iPads & iPhones
    How to manage files in Acrobat DC for iOS
    For Android devices
    How to open PDFs on Adobe Acrobat DC on Android
    Please let us know if you have additional questions.

Maybe you are looking for

  • Versamail Exchange ActiveSync wireless push e-mail ONLY; Sync Contacts/Calendar via Desktop/USB

    I use a 3rd party conduit, PalmPilot Link for Commence RM CRM software from Commence Corp. which works with the Palm Desktop sync engine to sync my Contacts, Calendar, Tasks and Memos. Recently I tested VersaMail 3.5.5 on my Rogers Treo 680 (despite

  • Error mensage: F5734 Item 1000 should be created, a maximum 999.......

    Hello Friends!!! We're using NewGL and Document splliting actived ECC 6.0 When we're trying to execute the T-code F-51, show error mensage below: Error mensage: F5734 Item 1000 should be created, a maximum 999 items are allowed We selected in GL acco

  • Images on imac display too sharp/detailed

    I just got my first imac and I've been learing the ins and outs. One thing that bothers me though is that when I'm visiting many web pages I find that images, thumbnails, movie clips, etc. are rendered with so much detail they tend to look distorted.

  • Mass Change of Payment terms

    Hii all I want to change the Payment terms in 1600 documents.ie i want to update field ZTERM in BSEG.Can anybody help me in how to do this. Regards, Aakash

  • Mac mini midle 2011 no network reconect

    Hi, When I need reset my ADSL router, the mac mini apear connected to network (cable based-ethernet port to router) but safari tell me there is not connected to internet. My mac mini network configuration is:   IP: static   the rest of parameters I t