My E72 is asking me to select WLAN network instead...

while setting up a new email mail box (gmail)
my E72 keep asking me to select WLAN network instead of using my regular at&t internet acces.
Wlan is set to <never>   in the connection setup..
is any one know what is happening ?
it used to connect with my AT&T internet acces while setting up emails mail box.
it works fine when i go online...but not while i am setting up mail box
thank you.

GOTO "destinations" in settings if you have that.
and change AT&T to the number 1.
for your email app, you have to configure the access point to be used manually. if its anything like mine,
you open the email app,
goto setting,
select the specific email,
mailbox setting,
goto advanced mailbox settings
change access point for incoming emails settings and outgoing emails setting to AT&T.
cheers

Similar Messages

  • 'Select WLAN Network' every time I boot! Grr.

    I can't wait to get rid of my Nokia E71 - the most infuriating, badly designed, buggy piece of technology ever 'created' (more like shoved into existence).  In the meantime I am stuck with it on contract, and have one (well 15) particularly annoying bug:
    Every time it boots, it says 'Select WLAN Network'.  Of course the geniuses at Nokia do not tell you what application is requesting this, or why, and no matter how many times I select my home network, and enter the WPA key (which is already saved as the default access point anyway as well as already being connected via VoIP), it asks me again and again every time I reboot.
    If I am out of WLAN (it's called Wi-Fi Nokia BTW) range, it gives a 'No WLAN Network Found' error on boot instead, and forces me to press OK.  Absolutely waste of time.
    Can you advise how to remove this one-aggravating-annoyance-too-many-feature please?
    If I email Nokia support, they just tell me to take my phone to my nearest service centre.  I will do one day, and shove it up their ~~~TRANSMISSION ENDS 

    What provider are you under contract with?  As my E71 certainly does NOT do what you describe.  I have seen on these forums that the provider 3 (or someone else) has custom firmware that apparently attaches to the network all the time for some reason.  The posts I have read so far do not mention anything happening like yours so I am unsure what is going on.
    E71-2 Grey Steel
    type: RM-357 code: 0569371 FW: 410.21.010
    08-02-2010 Nokia E71-2 (236.06)

  • Dialog Box: Select the network you want to join...

    I just installed updates from mac that required restart. Upon restart I have a screen asking me to select the network I want to join with the following choices. ANDM2 (with a lock beside it), fortress1 (w/lock beside it) , linksys and XVU83 (with lock)
    then I can select one and join or cancel. What is this? I have a mac on a cable internet connection. Thanks for any help.

    That's a wireless dialog. If you aren't using Airport wireless then turn off Airport either from the menu bar status item or using Network preferences.

  • N86 keeps asking me to select connection

    I hope someone can help. I have recently acquired a Nokia N86 and it keeps asking me to select a connection: WLAN, Internet (my home network connection), WAP Services, Uncategorised. If I select one, a short while later it will ask me again.
    Does anyone know why this is happening and how to stop it?
    Thanks

    How to stop connection pop-up on Nokia n86
    you need to do the following steps to completely eliminate the
    "select connection popup"
    1.Menu --> Applications --> Email --> Settings --> Open specific
    email folder (i.e. gmail) --> When to Sync --> Update Interval---
    >manual
    repeat step number 1 in any other email you have
    [menu>applications>email>settings> (i.e "hotmail" or any other
    email)--->when to sync--->update interval--->manual]
    2.menu-->tools--->settings--->connection--->destinations---
    >options--->default connection--->ask once>default connection---
    >ask once
    3.menu-->tools--->settings--->connection--->wireless lan----> show
    wlan availability--->never  , internet connectivity test --->never
    run

  • TS1702 while registering my account for i-tunes, it asks me to select payment method......my country is not listed in the list provided.......i can't even download the free items in i-tunes....what should i do?

    while registering my account for i-tunes, it asks me to select payment method......my country is not listed in the list provided.......i can't even download the free items in i-tunes....what should i do?

    HI..
    iTunes Store: Which types of items can I buy in my country?
    First, click the round flag icon bottom right corner of the iTunes Store window to select your country.
    Then click Store > Sign In from the iTunes menu bar the click View Account.
    You can select a payment method from the Account Information window.

  • I have an Adobe Flash Professionals digital classroom book for CS6 and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static,

    I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?

    Hi,
    Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
    If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
    Thanks!
    Mohan

  • I was importing photos to iphoto and somehow lost access to my iTunes library. when i open iPhoto, it asks me to select a library, but there are no photo libraries for me to select. I cant find my pictures and have no access to my iPhoto..

    I was importing photos to iphoto and somehow lost access to my iTunes library. when i open iPhoto, it asks me to select a library, but there are no photo libraries present for me to select. I cant find my pictures and have no access to my iPhoto.

    somehow lost access to my iTunes library.
    What does iTunes have to do with this?   Also more specific information might be helpful.
    What system and iPhoto versions are you running?
    Where are you being asked to select a library?  What kind of library, iPhoto or iTunes?
    What do you see when you first launch iPhoto? 
    OT

  • I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

    I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?

    Menu > File > Export > Word or PDF
    Virtually no businesses have Pages to be able to read .pages files.
    Definitely not those with PCs, because there is no version of Pages for PCs.
    Peter

  • No wlan network found "E72"

    Hi,  
    I purchased a new E72 two days ago .. And tested more than once Internet access from my wireless connection and it works well .. But suddenly I found this message "No WLAN Network found", Although the wireless device is working well when I want to access the internet through my laptop
    plz help me ,
    elazaly

    Sometimes this happen to my E72 as well, and I try after few seconds and then it comes and work well.

  • Lion Asks Me to Select a Startup Disk Each Restart, why?

    Every time I restart LIon, it asks me to select a startup disk, as if I was holding down the option key.
    Thing is, I'm not.
    In system prefereces, I've selected the internal harddrive as the startup disk, but it makes no difference.  It still asks me to choose between the Lion Disk, the recovery partition, and a backup clone I have connected.
    Obviously, I want to stop this behavior.  How can I do it?

    I get:
    finderinfo[0]:    116 => Blessed System Folder is /System/Library/CoreServices
    finderinfo[1]: 280701 => Blessed System File is /System/Library/CoreServices/boot.efi
    finderinfo[2]:      0 => Open-folder linked list empty
    finderinfo[3]:      0 => No alternate OS blessed file/folder
    finderinfo[4]:      0 => Unused field unset
    finderinfo[5]:    116 => OS X blessed folder is /System/Library/CoreServices
    64-bit VSDB volume id:  0xD30F967B6B2A99DF
    Anything off there? (I not only want to fix it, but understand what's wrong)
    Does that mean I should try the second command?

  • Message "WLAN: Unable to connect. Wlan Network not...

    Well guys i bought my nokia 5800 today so like any other curious people i looked the wi-fi hoping connect with the internet and when i try to connect with the wi-fi appears this message "WLAN: Unable to connect. Wlan Network not Found." and then it dosen´t connectbut he finds normally the networ and this message appears after i type the Router password.i´ve already looked in another foruns and i´ve already switch off the Option Qos in my router and the problem cotinues, so anyone can help me?my router is one linksys wrt54g and the type of connection is static ip an the security is Wpa Personal TKIP....
    PLEASE ANYONE CAN HELP ME?I´D BE VERY GRATEFUL WITH THE SOLUTION FOR MY PROBLEM...
    Thanks 
    Message Edited by darkcraft on 13-Jul-2009 09:47 PM

    tomasvaril wrote:
    Same To me. I have Asus WL-500W router at home, WPA2-PSK(AES), password similar to this "lIGf@91pY0TnFY!Jh@7LjTUlsL3ZPY", MAC address filtering. My old Nokia E51 works, my Touch Pro Works with it. When i try my one day old Nokia E72 it does not work, the same like others:WLAN: Unable to connect. Wlan Network not Found. E72 works at my work wifi, which has the same settings but without mac filtering. Have no idea what is happening, all is setting correctly. MAC address of E72 is allowed on router. It has the same settings like E51, but E51 works like a charm E72 does not work. What is wrong?
    As already suggested, you could try disabling the MAC filtering from the router, just to outrule possibility of a typo while entering E72's MAC address to router settings.
    Have you tried swithing a WLAN channel that your router uses?
    Log in to your router's web management pages (check router's default IP address and username/password from it's manual) and switch of the "Automatic" channel selection mode. Try few different channels, like 1, 3, 6, 9, 11, if one of the channels happens to work any better. Note that in case you have set your router to use channels 12 or 13 (or in case "Automatic" channel selection mode has decided to select channel 12 or 13) you must have a SIM card inserted and some other than "Offline" profile enabled on your phone since Offline mode (i.e. airplane / flight mode) won't allow your phone to operate on higher channels than 11.
    In case you have configured your WLAN network (SSID) to be "hidden", try disabling hidden SSID mode on the router.
    Asus WL-500W router seems to be a pre-standard 802.11n device so might be worth looking in to your router's WLAN settings and see if playing around with router's WLAN operating mode and settings improve the situation. First of all ensure that your router is not set to operate in 20/40MHz mode (set it to 20MHz only) assuming that the router is in default 802.11b/g/n mode. You could also try disabling the 802.11n mode completely by selecting a 802.11b/g mode (if available).
    You should probably also check that you're running latest (2.0.0.6 ??) firmware version on your Asus WL-500W router since there seems to plenty of complaints regarding WLAN connectivity and stability issues (in general, not specific to Nokia handsets) with this particular router model.

  • Why do I have to select my network using Network Diagnostics every time I turn on my MacBook Pro and go to Safari?

    Every time I turn on my MacBook Pro, before I can use any programs that access the internet (i.e. iTunes, iBank, etc), I have to go into Safari where it prompts me to perform network diagnostics.  (I use a wep encrypted wireless network.)
    During network diagnostics, I select my network and at some point it tells me that my network appears to be working properly and then defaults to the Apple.com webpage.  I then Quit network diagnostics and exit Safari and then I am fine to do whatever I need to in the other programs.
    This is quite annoying and I wish it would just remain on my network without me having to do this every time I turn it on.  Is there some thing I can do or some setting that I am missing that would allow me to avoid this?

    Is your network hidden? See:
    WiFi, Internet problems, possible solutions
    Secure your network
    WiFi security issues, at home and WiFi hotspots
    Change the name of the network and the password, then connect manually and when it asks to save in Keychain do so.
    If it's still giving problems and it'a not the router, it's the computer, then go through this list.
    Step by Step to fix your Mac

  • When i open any mail its telling me to select a network never have seen this before and wi fi not connected

    anyone around ?

    Have you changed your WiFi password?
    Just back into settings and connect to your WiFi network.
    Settings > WiFI > Select your network > Enter password
    You can also turn off the Ask to Join Networks notifications in the same menu at the bottom below
    "Ask to Join Networks" switch to Off.
    So if you're not connected you'll have to go in and connect yourself if it's not a known network.
    If you've never connected using a WiFi network hit cancel and continue to use your Cell Signal/Data plan to access your email.

  • Re: Satellite A350D - Does not find any WLAN network

    Because the e-mail-support page doesn't works at the moment (after sending a message I only get a blank page) I will ask my question here.
    Since maybe 2 or 3 months my connection to WLAN-networks is really bad. I have nothing changed, neither the Windows version (Windows 7) nor drivers, but it does not work as good as it was.
    Some examples:
    I'm sitting 5 metres away from the wlan router. Only a wall is seperating. The notebook does not find any wlan-network. With my HP notebook the connection is good. I'm sitting on the desk where the router stands. The notebook finds the network, but Windows says connection seems to be only average or bad. My HP notebook has the best connection rating.
    Anybody here who can help or can say how I contact the support per e-mail without getting only this blank page?
    Greetings Schlachtvieh

    Hey,
    After WLAN driver update make also sure that power saving mode is disabled for WLAN card. You can do this in Windows Power Management.
    http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm
    Driver update in such cases its always advisable but in my case it was the power saving of WLAN card. :)

  • WP8 Selecting Prefered Network Provider when Roami...

    Hi,
    I have a Lumia 820 and I'm about to travel to another country....
    Would there be an option to select a prefered network provider when roaming?
    I'm unable to find an this option under "network+" or "mobile network" in settings..
    The reason for asking is that my current (home) network provider offers reduced roaming & data cost packages if I select specific network providers when abroad. My old "brick" phone allowed this option,or maybe the option will appear when I start roaming.
    Thanks, Murphys001

    When you arrive at your destination, goto Settings>mobile network>Network selection. The phone will start scanning for available networks. It will then list all available networks and all you have to do is to select the one you want. Don't forget to set it back to auto when you leave. 

Maybe you are looking for

  • How can I sync my iPhone/iPad to a new computer without losing data on the devices?

    I have the itunes home sharing set up. I have 2 different laptops, each with it's own iTunes on it, and each has it's own library. I have my iPad and iPhone synced to Laptop #1, but this laptop is old and I want to sync my devices to Laptop #2. I've

  • Issue with using GET n SET Parameter in module pool programming.

    Hello Friends,                      I am using SET n GET Parameter to access input values from a screen. But when I use it, the values are not transfered back n forth. Getting initial values. Your expertise would be appreciated. Cheers, Senthil

  • Problem with Seeburger BIC

    Hi Guru. I've a question for you!! I'm using the Seeburger BIC Mapping Designer but I'va a big problem: I' can't create the deploy file. I'm try to follow all the documentation that i find in internet but doesn't work... After the generation of the X

  • Cannot Pass owa_util.ident_arr variable to function

    I have the following procedure using a cursor with a where clause that depends on a function. The function uses an owa_util.ident_arr type variable. For some reason the package fails to compile due to PLS-00382: Expression is of wrong type. If the fu

  • Tutorial for jwsdp-1.2

    Hi, Can any one point me to any Tutorial for jwsdp-1.2. I guess there are some differences from Tutorial for jwsdp-1.1. thanks Rahul