My Early 2011 MBP Has Just Started Running Extremely Hot.

Hi there. As in the title I have an early 2011 MBP, 15 inch, £1550 model. I've been playing Football Manager a lot recently, and sure it runs at around 50-60 degrees but that's fine. However now i'm just on FireFox, been on for around 30 minutes, and my battery is being sapped as if I were playing a game and i'm at 60 degrees average with SMC at 5000 RPM as well as a notebook cooler which has a fan built in. Usually I run at around 30 on the internet, 40 is fine though.
Any reasons why it is doing this? Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%. It's really annoying because I want to play Football Manager but when I put it on, it's at like 70/80 degrees. Super, super hot considering I have lots of cooling stuff. Any clues anybody, please!?

"Nothing is running at over 5% in the Activity Monitor. FireFox seems to be spiking though, at like 30%."
Do you have "All Processes" selected in Activity Monitor? If not, select it in the drop-down menu and then see whether there's something using a large percentage of your CPU.

Similar Messages

Macbook Pro 2011 just started running extremely slow

After recent OS upgrades and general teenager use, the MacBook Pro all the sudden is running extremely slow. I am not a really technical person, what should I do to fix? I will start backing up now.
Thank you
Matt

You may be able to improve the speed with some software work but it could also be your disk or SSD is corrupt or failing.
Try resetting PRAM and SMC:
http://support.apple.com/kb/PH4405
http://support.apple.com/kb/HT3964
Is it faster now? If not, proceed.
Restart in Safe Mode:
http://support.apple.com/kb/HT1564?viewlocale=en_US
If it boots faster then uninstall all unnecessary login items >User&Groups>Login items. Unlock the padlock. Remove them with the minus -
Also uninstall internet plug-ins in your browsers.
Is it faster now? If not, proceed.
Backup your data immediately:
Before proceeding you should make sure you have a current backup. If it has been getting slower over time your disk could be a failing slowly. SATA drives have two retry modes: short and long. They can continue operating as read errors are increasing. The long retry cycle is very long and can cause significant performance degradation. If it has started long retries then it is likely to get worse and eventually fail. SSDs also have a failure mode where the fail slowly.
Time Machine Basics: http://support.apple.com/kb/ht1427
Most commonly used backup methods:
https://discussions.apple.com/docs/DOC-3045
Methodology to protect your data. Backups vs. Archives. Long-term data protection:
https://discussions.apple.com/docs/DOC-6031
Spotlight: If Spotlight is continually running, re-index Spotlight:
http://support.apple.com/kb/ht2409
Low disk space:
If your disk has less than 10% free space or less than 15 GB free it can slow down your Mac. For information on how to clear disk space see https://discussions.apple.com/thread/5634300?tstart=30 .
Disk Diagnosis and Repair; Runaway Processes:
See Kappy’s suggestions "Things You Can Do To Resolve Slow Downs” at https://discussions.apple.com/thread/5635990?tstart=0
- Directions on how to detect a failing drive
- How to repair a filesystem on a working drive.
- How to check for runaway processes hogging the processor time.
Additional suggestions in "Why is my computer slow?” are particularly good.
https://discussions.apple.com/docs/DOC-3521
In the "Something is wrong with your machine” section.
- Corrupted Caches
Using Onyx to clear the caches.
- Step by Step to Fix your Mac:
https://discussions.apple.com/docs/DOC-3353
(I learned a lot reading this document. Good stuff.)
- A clean install.
After you have backed up your system twice.
Preferably with one of the backups being a clone.
Time Machine restores are complex and can sometimes fail.
You don’t want to risk all your data on one backup as you wipe out the data on your Mac.
As part of this clean install procedure erase the disk with Security Option Zero
that writes zeros to all sectors and remaps bad sectors as it does so.
That is a time consuming operation, but worth it.
See https://discussions.apple.com/message/24057867#24057867
Additional suggestions:
http://www.macworld.com/article/2026650/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.html
and Mac Performance Guide: http://www.thesafemac.com/mpg/
Hardware replacement or upgrade?
Hopefully by now your Mac is back to its normal speed. If a hardware repair is indicated take it to an Genius bar at an Apple store for a free diagnosis and estimate of repairs. If it is under warranty or AppleCare they will repair it for free. If not, you can compare their estimate with DIY repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country
You can speed it up further by upgrading some hardware. (Do not upgrade the hardware if it is still covered by the warranty or AppleCare.) For the following memory, disk or SSD replacements and upgrades check out OWC http://eshop.macsales.com/, Crucial: http://www.crucial.com/ and Kingston http://www.kingston.com/us/. You will need to know your Mac the year and season your Mac was first sold and model number which can be found here:
 > About This Mac > More Info… > System Report > Model Identifier:
If your Mac has 2 or 4 GB of RAM, consider an upgrade to 8 GB (if the memory is upgradeable). An 8 GB memory upgrade is only $100. When I upgraded a MacBook from 2 GB o 8 GB it booted thee times faster.
If your Mac has a disk and it won’t repair properly, is low on disk space, or you just want a considerably faster disk, check out an upgrade to an SSD-Hybrid disk. Google "Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch" or consider an SSD (120 to 480 GB).
OWC has SSD replacements and upgrades for MacBook Airs and Retina MacBook Pros.
Good luck. May the software fixes do the trick.

MBP has just started intermittently started making sound effects noises.

My MBP has started making random sounds. Its one of the OS X sound effects - I most commonly hear it when there is an error or my battery is about to run out...
I thought it might be a random app running in the background , so I rebooted and it was still there.
I'm running Snow Leopard. My battery is due replacement - being 3 years old. but apart from that everything appears normal.
There are no visual warnings so I'm at a loss to know where to start to solve it.
Anyone got any ideas?
Thanks.

Did you check with Activity Monitor to find possible applications in background?
You can find Activity Monitor your applications folder, under utilities, or by searching spotlight for "Activity Monitor."
Generally, anything with an icon next to it is an application.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all.

My early 2011 Macbook Pro on start up has wifi, but drops it soon after and never comes back, AHT shows nothing wrong. Multiple wifi's tried and same on all. I have also re-installed OSX from scratch and still happens.

I have the same problem. I have a white macbook 2010, with mavericks os. I just found my mac not powering on and then I tried to run it on safe mode by holding the shift button but it will turn off seconds after I let go of the shift button. I am able to access the desktop and use it while holding the shift button the whole time. It's a bit slower than before but I figured maybe it's because of holding down shift button.
I went to the Apple Store to have them look at my mac and I was told it's a failed hard disk. I wasn't told why he was able to conclude that a failed hard disk is causing the problem, I was just told to get a replacement. But the thing is when I ran Disk Utility it says, "disk appears to be okay." So I also feel like it's possible it's not a hard disk issue because it's also the first time it happened. My mac was working perfectly fine before all this.
Do you know anything else that could cause this problem? Were you able to find out what's wrong?
Thanks.

I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

How do I securely delete data from the machine?
Erase, formatting, OS X installs on Mac's

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, the iPad Air I also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

Early 2011 MBP Slowing Down

Hello, I have an early 2011 MBP (15-inch), system report below:
MacBook Pro (15-inch, Early 2011)
Processor: 2 GHz Intel Core i7
Memory: 16 GB 1333 MHz DDR3
Startup Disk: Macintosh SSD
Graphics: HD Graphics 3000 512 MB
Lately, my MBP has been slowing down a lot.
I tested out a bunch of flash sites, but it does not seem to be the problem. Like I said, I have 16gb of RAM (combined with what I have located above, i7, etc), and have had numerous flash sites up, but no slowdown. The problem is recent, in that I've noticed it in the past 6 months. Nothing changed in that period at all to cause this problem.
I've run this setup for a couple years without issue (SSD where the DVD player used to be, and the HDD where the old HDD was located), without issue.
My MBP gets so hot that I have to move it frequently for scare of erythema eb igne (stupid technical term, but I might not be joking, and would rather not joke around about something like that.but seriously it get that hot where your only option is to shut off the MBP. I know that might sound extreme. But my MBP gets that hot. Especially if you are running a program like Premiere. I understand the power and RAM that it takes to run a program like that, but it was shocking. This is a program (Premiere) I ran without problems previously..
Checking activity monitor (and iStat), RAM does not seem to be the issue. CPU seems fine 88-90% usage,
Usually have 7-8GB of RAM available, and the CPU usage under 90%.
I have no idea, but I will be taking a can of compressed air to the MBP.
I was just wondering if anyone had any other ideas or had similar situations to help me out?
Thank You,
T

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

Early 2011 MBP 17 Random Shutdown and Battery Behavior

Hi all, new to the forums here.
I recently purchased a refurbished early 2011 MBP 17' 2.2 Ghz i7 with 8gb and 10.7.5. Out of the box, machine looked great, but I noticed that the power cable was different than the one I had for my early 2011 MBP 15' I have for work. This raised an immediate redflag (buying from a refurb site outside of apple is always a cause for concern IMO) so I abstained from using that charger until I knew a little more. I plugged in the machine and booted it up and everything worked great. The batter was close to 100%, so after charging for approximately 20 min, I unplugged it, and the laptop immediately died. I powered it back on, and the harddrive began to spin for a few seconds, then the same result, total loss of power. Started up again, and I was able to boot into OS X and play around for a bit for a period of time before again, shut down.
For the next few days, same story. I was able to at one point, drain the battery completely and do a full cycle charge. The first time I did this, no change in behavior. Again, a few days later, I was able to drain the battery and perform a full cycle charge, but this time, a major change in behvior. Since the second full cycle charge, I have had absolutely no power problems. I haven't really "pushed" my MBP to see if fully utilizing the CPU/RAM/GPU will produce the similar results I had early, but it appears that everything is working great.
Here a few interesting notes to my situation.
When I was first operating the system (when plugged in, there were no shutdowns, only while on the battery) I pulled up my system report, and noticed that my battery cycle was very low (~5). This seemed odd, because I had opted for a used battery instead of a new one.
Prior to reinstalling Mountain Lion, my volume up key would trigger a few strange events. The screen for briefly get quite bright, then all open applications + the doc and widgets would restart (similar to killing explorer.exe in the windows task manager).
Since performing the fresh install, I have had abslutely no issue with my MBP and I love it, its a beautiful machine. However, as I purchased refurb, I'm hesitant to proceed (I will exceed my return period in ~2 weeks) without knowing my machine is in prime working condition. I have read issues about early 2011 models having issues with batteries and GPUs, but my symptoms were dissimilar to those described by others with those particular issues.
Any thoughts?
I have a genius appointment tomorrow evening for a general diagnostics check, but if others have experienced these issues, I would appreciate some input.

Do a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
You may need to use OPTION D to start it.
Install iStat pro and open Activity Monitor. Set Activity Monitor to show 'All Processes' and '%CPU' to display values from high to low. Post images of the two such as these:
Ciao.

AMD Radeon HD 6750M, Early 2011 MBP, 10.9.4 Problems

Hello,
Ever since 10.9.3 update I have a serious problem with my Early 2011 MBP with AMD Radeon HD 6750M card.
First my configuration:
MBP 2.2 GHz Intel Core i7 (Macbook Pro 8,2)
16 GB RAM
512 GB Sandisk SSD and 750 Stock HDD
AMD Radeon HD 6750M and Intel HD Graphics 3000
OS X 10.9.4
I'm usually using my MBP with external display with a resolution of 1920x1080. The display is connected via DVI to Mini Display Port adapter. When I connect the external display, my MBP switches to the AMD card. Here's where the problems begin. If I'm using Davinci Resolve, Capture One Pro or any other software (that I use regularly) that uses the GPU extensively, the cpu usage will rise, the computer will start to feel sluggish and my productivity almost becomes none because even the simplest tasks such as opening another tab in firefox or safari takes anywhere between 1-3 sec. When the computer starts doing that, I cannot play a simple HD video at native fps and the whole machine basically becomes too expensive paper weight. The strange thing is that even after I quit all programs, the system cpu usage continues to be high, around 50% with kernel_task being the star using all this cpu and it keeps using all of this cpu forever, at least until i shut it down or disconnect the external display and manage to make it switch to the internal Intel gpu.
The problem started after istalling the 10.9.3 update and it's still there with the 10.9.4 update. I even formatted the computer and reinstalled everything but the problem still persists.
I haven't experienced anything like this on 10.9.2 and the machine was actually quite fast before that. Now, I have too expensive paper weight on my desk.
Since the problem is very specific, I doubt many users will complain and I doubt Apple will ever do anything to fix it, at least until hopefully the new drivers in 10.10 fix the issue hopefully.
My question is:
1. Has anyone else experienced this and managed to solve the problem?
2. How can I downgrade to 10.9.2? I don't have time machine backup but i have bootable usb with 10.9.2. Will it help?
All best,
Goran

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
☞ Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Early 2011 MBP - Won't install updates?

Today was the first time I've used my MBP since finishing school for the year and I decided to try and install whatever new updates were recently released. However, whenever I hit the option to restart my mac to install the updates it... it seems to just return me to the log in screen, and when I check my Software Updates they're all still there waiting to be installed.
Help?
It's an early 2011 MBP, running OSX Snow Leopard 10.6.8. 2.3 Ghz Intel Core i7 with 8GB RAM - if that helps at all.

Yeah, that probably would've helped, huh?
The latest iTunes, iDVD, iMovie, iPhoto + the latest firmware and security updates.

Early 2011 MBP stuck on gray screen, verbose mode shows SMC error too

Hi!
I have and early 2011 MBP, running on OS 10.7.5 is continuously stuck at grey screen upon start-up.
I tried the steps as mentioned in Mac OS X: Gray screen appears during startup - Apple Support article apart from reinstalling OS X. The laptop started after every step, but then stopped again. I tried SMC update, that also worked for once, and on the second start up I ended up with a blue screen. During a later attempt, it worked again for a while, but ended with a distorted graphics after 15 mins. AHT (short version) doesn't show any hardware errors. Now the laptop doesn't go further than grey screen at all, and after a minute or so there's a heavy fan activity. The verbose mode also shows and SMC error, smc: : smcinithelper error: mmio regmap ==null - fall back to old smc mode (AHT Shows SMC version as 1.69f4)
What do you advise?

Try this:
Reset the SMC and the NVRAM:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try a safe boot:
https://support.apple.com/en-us/HT201262
Any success?
Ciao.

My early 2011 MBP goes to sleep even when Sleep is turned off and the power is plugged in.

Basically, it just decides to go to sleep after a few minutes of it being idle. Searched around but I couldn't find a similar problem. I've already tried resetting the SMC, but that hasn't fixed it.
Any ideas?
It's a early 2011 MBP unibody, running Mavericks.

Try checking the 2nd half of this link
OS X: When your Mac doesn't sleep or wake

Can't install windows 8.1 on early 2011 MBP

Hey all,
I'm having problems installing Windows 8.1 on my Early 2011 MBP (MacBookPro8,2). When my superdrive died I installed an SSD for the boot drive and kept the original hard drive as a secondary drive. I used BCA (modified to support USB) to create a USB 2 Windows 8.1 install drive from an ISO I previously created. I also had it partition the hard drive. When it reboots I get the "no bootable device found" and blinking cursor issue. I've tried holding down option and choosing EFI, but i've picked up during the last week that installing through EFI on my MacBook Pro isn't possible. Does anyone have any ideas on how to solve this?

I ended up coming across this last night:
http://malwaretips.com/threads/installing-windows-on-a-mac-with-a-damaged-superd rive.32474/
I am in the process of testing this out, but currently I'm stuck with an issue with winclone not expanding the image of the usb install disk to use all the space in the partition. However I did boot into the Windows installer and didn't run into the "couldn't find partition" , "no bootable disk", or "not an MBR" errors I've seen before.
I Think the key for non supported hardware and Windows 8 or later is to create the bootable usb in windows and not through BCA. I actually used the VMWare Fusion trial and a windows 10 technical demo image to do the monkeying around in windows. Hope this helps someone else. I'll keep updating.

My Early 2011 MBP Has Just Started Running Extremely Hot.

Similar Messages

Maybe you are looking for