My earphones won't work when there pluged in

I just recently got an iPhone 5c and any time i put the earphones in the music comes out load insted of listening threw the earphones. The earphones do work cause i tryed them on my ipod

Hey moriartyeve,
Sorry to hear you are having this issue with your new iPhone. If you are not hearing any audio through your headset, and are only hearing it through the built in speakers, you may find the information and troubleshooting steps outlined in the following article helpful:
If your headset isn't working - Apple Support
Cheers,
- Brenden

Similar Messages

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

I have Stickies 6.0, I upgraded to 10.6.8 and now it won't work, is there any way to recover my old Stickies info?

Yes, connect to your computer with the latest version of iTunes installed and restore it. If it doesn't show up in iTunes when you connect it see: http://support.apple.com/kb/HT1808

Programs that require a network connection won't work because there is no virtual IP address available for this session.

Programs that require a network connection won't work because there is no virtual IP address available for this session. Per application IP virtualization is enabled.
There are in fact available IP address's within the dhcp scope. Before I dig to deep into root cause.. Could the problem be RDS CAL licensing running out, or isn't that not a symptom of my error message?

Hi,
Thank you for posting in Windows Server Forum.
As per my research, there is no any issue related to RDS CAL licensing. Prior to the issue which you are facing, there are some basic setting which need to configure.
Application Compatibility – Turn on Remote Desktop IP virtualization
Some applications require a unique IP address, which is by default logically not the case if the application is running on RD Session Host. To solve this issue, Remote Desktop IP Virtualization is introduced. With this setting you enable the IP virtualization
feature. When enabling this setting you need to specify if the virtual IP is provided per session or per program. When using per program you need to define the executable to which an IP address should be configured. Desktop IP virtualization also needs the
configuration of the next setting.
Application Compatibility – Select the network adapter to be used for Remote Desktop IP Virtualization
When you need to use Remote Desktop IP virtualization configuring this setting is mandatory. You need to specify the IP address of the Network Interface Card which should be used for this feature. Besides the IP address you need also to specify the network
mask using the slash notation, for example 192.168.77.201/24.
Application Compatibility – Do not use Remote Desktop Session Host server IP address when virtual IP address is not available
More information:
Microsoft RDS Policies explained (Part 2)
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/microsoft-rds-policies-explained-part2.html
Configuring Remote Desktop IP Virtualization II
http://blogs.msdn.com/b/rds/archive/2009/07/15/configuring-remote-desktop-ip-virtualization-ii.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

Why does fix capitalization work when there is only one space after the period in pages 09?

why does fix capitalization work when there is only one space after the period in pages 09? For example: "Turn on 3rd St. After the traffic light." There is only one space after the period in "St." shouldn't it only auto correct after TWO spaces..?? the word After, should be after..

You may also use a noBreak space after the period at the end of the abbreviation.
If I remember well, in such case the capitalization will not apply.
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

Why this path doesnt work when there is "!DOCTYPE" element?

Hi, I need to extract contents from an xml file, which looks like
<hr />
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//ES//DTD journal article DTD version 5.0.1//EN//XML" "xyz501.dtd" > 
<article docsubtype="fla">
<item-info>
<jid>YANBE</jid>
<aid>12941</aid>
</item-info>
</article>
<hr />
And I have tested with this path "//article/item-info/jid/text()", but it doesnt give me anything. But I noticed that when I remove line 1, it does extract the content "YANBE"...
why the path doesnt work when there is that DOCYTYPE element? How should I get around with this please?
Many thanks!

The extract of XML you gave is not valid (Line 1: <hr/>) but besides that ... I think your problem is in the DTD.
Somewhere in the DTD it probably 'sneakily' defines a default attribute which in reality is a default-namespace for one of the elements. This means that in your XPath handling, you will have to map a prefix to a namespace-uri (NamespaceContext [1]) and use this newly defined prefix in your XPath expression.
//tst:article/tst:item-info/tst:jid/text()[1] http://java.sun.com/j2se/1.5.0/docs/api/javax/xml/namespace/NamespaceContext.html

My 8 key won't work when I press it to put in my password, what can I do?

my 8 key won't work when I press it to put in my password, what can I do?

Presumably you are connecting it from the *Dock Connector.* In this case, the controls on the car stereo should be controlling the iPod and the iPod's controls are disabled.
If you are using the car's connection interface, consult the car manual to find out how to control the iPod. If you are using an adaptor between the iPod and car, ask the adaptors installer or manufacturer.
Phil

Since I updated to Yosemite my mouse won't work when I turn on, unless I unplug it and put it in again

I have a mini mac updated to Yosemite, since I updated, my mac mouse won't work when I open ...So I have to unplug from my mac keyboard and plug back in again . Does anyone have the same problem?

Thanks Eric...a few other things have happened too...still working on them, I like the change just updating and figuring out why I might have some other problems...thånks again

My nano works when connected to a computer but won't work when unconnected. The battery is full.

My nano won't work when it is not connected to a computer. It won't even reset. If I pull it into my computer it will work and it shows that the battery is full. What might be the problem?

Then that sounds to be the Apple ID that owns this Mac, the OS and any preinstalled apps. Did that Apple ID set the Mac up when new?

Movies won't work when a DVD is inserted ?

Movies won't work when a DVD is inserted. What do I do to watch a movie ?

Just one DVD or all of them?
Some DVD's just need a gentile cloth and rubbing alcohol wipe on the bottom to rid of fingerprints etc.
If your using out of region code DVD's (each area of the world has regions codes assigned to the computer and disks) then that needs to be changed.
This can happen if you buy a Mac used from another part of the world or use DVD's from another region.

I need help. Earphone won't work on stereo

I have late 2012 macbook pro, upgraded to mavericks, and when i plug my earphone it won't work on stereo. the left earphone doesn't produce sound. I thought it was my earphone but apparently my earphone is fine when i plug it into my phone. Fortunately the internal speaker still works on stereo. Has anyone ever experienced this ? I can't work if there's no music.. please help!

Go to Applications > Utilities > Audio MIDI setup and see what the settings look like for built in output. Maybe the left channel is muted.
I'd try another pair of earphones too. Maybe it's the earphone jack on the computer.

Old name and password won't work when networking to new Win7PC.

I have a name/password problem when trying to network a new Win 7 PC via a new Netgear 2200 Router to a MacMini.
It networked 100% OK with the old XP System and old Netgear Router, but now when I click on the PC icon that shows up in Workgroup the old password doesn't work and there is a different popup menu that won't allow the old name and password.
Interestingly the Mac Mini still networks with the XP laptop using the old pupup box with name and password.
Netgear say it's not their problem - even though they list 'mac compatible' on their box.
The PC manufacturer (Acer) say Mac issues are outside of their free technical support.
Apple support said the Macmini was 'out of warranty'.
So I'm stuck using a USB stick or email to transfer files from one to the other!
Please help, I need that network connectivity back asap.

Option 1
If you've enabled root logins, log in as root and promote the other user to an admin.
Option 2
Recover your entire system from the last Time Machine snapshot taken before the damage was done, if you know when that was. Afterwards you can restore any data that has changed since then from a later snapshot. If you’re an advanced user familiar with the shell, there may be a quicker fix, but I prefer not to get into that.
Option 3
Back up all data, then boot in single-user mode (command-S at startup.) When the text stops scrolling, follow the prompts to make the boot volume writable. Then enter the following command very carefully:
rm -i /var/db/.AppleSetupDone
You should get the following line of output below what you entered:
remove /var/db/.AppleSetupDone?
If you do, then enter
y
and press return. Then type
reboot
Press return again. The system will boot into the Setup Assistant, as if you were setting it up for the first time. Skip the prompt to transfer information. Create a user with the same name as the old admin user. Log in and test. You may need to recreate your other user accounts, if any. Their files won't be deleted.
Option 4
If you're not comfortable with any of the above options, get someone more experienced to help you. One way to do that is to make a "Genius" appointment at an Apple Store. It's a free service.

Hyperlinks won't work when copied from h to v layout

hi there, just created a dps folio with lots of hyperlinks (InDesign CS6 everything updated to the latest version).
First in the h version I put a rectangle above the piece of content I wish to be clickable, choose 'hyperlinks' and put the link in it then inside the folio overlays I make sure 'open in folio' is selected. Second I copied the rectangle to the v version of the layout, resize it so it's covering the right content. Inside the hyperlinks panel I'll find the links, sometimes when the rectangle is selected the link shows up darkened, but most of the time when I select the copied rectangle nothing changes inside the hyperlinks-links panel. In that case I selected the rectangle and clicked again on the hyperlink so I think it's 'bind' again.
Testing the folio on the iPad everything works fine in the horizontal version, but when i try the vertical pages not 1 link is working.
When re-ensure the hyperlinks are present in the v version, I noticed that clicking on the rectangles some of them do not highlight any hyperlink but others do and none of both work on the iPad. Strange is also when I click a rectangle who does not highlight any hyperlink and I then select (apply??) the hyperlink inside the hyperlinks panel to 'bind' both together the document would not let me save the document as if there's nothing changed on it..
Is this a bug or what am I doing wrong?
any hints and tips welcome ;-)
I've just deleted the hyperlinks overlays and tried with buttons overlay and 'go to url'. That seems to works on both direction.

Thanks for the prompt reply.
I do not manage the group policy and I'll have it checked. One question though, if it is the policy then would it not affect Excel 2003 as well. When I use Excel 2003, I see buttons in toolbar, using which I convert excel file to pdf and first thing it does is scans for various things ( Hyperlinks is one of them ).
When I tried with excel 2007, I can convert excel file to PDF by selecting print option and selecting Adobe there. It converts the file but the hyper links won't work.
One thing I noticed that using the pdf conversion buttons in toolbar in excel will convert hyperlinks too.
My problem here is that I do not see Adobe Acrobat converstion buttons in Excel 2007.

My earphones won't work when there pluged in

Similar Messages

Maybe you are looking for