My earpod will not plug in
The earpod plug will not plug into the outlet and I don't want to push it too hard any suggestion?
The plug insulation should be touching the ipod body. so be more assertive with the push. Cheers!
Similar Messages
-
My Profire 2626 will not plug into new i mac
My Profire 2626 will not plug into new i mac
You probably need a FW 800 (9 pin) to FW400 (6 pin) cable.
x -
USB cable will not plug into my 6555.
The USB cable that came with my 6555 will Not plug into the phone. It seems to be slightly too big. The Nokia Accessories page lists CA-101 as the right one (for $30.00). However, the cable that came in the box has no designation so I cannot confirm the right cable was packaged. I bought this phone at Best Buy and there is no reference on their web site for a USB cable accessory. I do not want to order a $30 part to replace one that was mis-packaged. Does anyone have experience with these micro-USB cables and can confirm which is the right one and where to obtain one? Regards.
Solved!
Go to Solution.As promised here is my follow up.
I went to Best Buy and talked to the sales team lead. The cable that was packaged in the 6555 box has a *mini* USB connection. The pjone requires a *micro* USB connection. So, my assessment that the cable end would not fit was accurate. The box was missing a small adapter that converts the mini cable end to a micro cable end. He offered to sell me a universal USB cable with the adapter included for half the listed retail price. I paid $8.00. (better than the $30 for a CA-101 from Nolia).
The adapter fits the 6555 USB port. I tried both the universal cable and the Nokia cable to link to 2 of my PCs (w/ Win XP) after installing the Nokia PC Suite. Neither worked. It seems that the PC does not recognize that the phone is there. I know there are other posts with related issues on this forum. So I will drop this thread and search for answers to the latest problem.
Thank you to all the folk who have shown an interest here and posted your thoughts / suggestions.. Regards, Bryan -
My new earpods that came with my new iPod Touch 5 does not plug in?
My NEW earpods do not plug in all the way! There is static when I plug it in! It won't let menplug it in all the way no matter how hard I pushed. When I plug it in (as far as it goes) all I hear is static! And then it stops. But sometimes it works but then the sound starts to go out from the speakers.
Definitely sounds like a hardware problem, probably with the jack. Set up an appontment at the the Genius bar of the Apple Store.
-
When I first got my iphone i plugged it into my friends computer and added songs from their itunes. Now when i plug it into my computer it will not connect or show up in the sidebar in itunes. I have already tried factory resetting the phone and 'authorizing this computer' in itunes. Can anyone help?
Is your iTunes up to date, it is now 10.7, click the iTunes button at the top of this page if you need the new version.
-
my itunes will not open at all. it occasionally will open but when i plug my iphone into it the program freezes and crashes. please help as soon as possible
i think i might have a solution... i have windows vista and after i installed to latest itunes update everytime i tried to open it it would freeze. I tried everything, including uninstalling itunes and all of its components and reinstalled it numerous times. So i went to the itunes folder in my folders, not on itunes, and i deleted my itunes library and playlists. After that it worked just fine, all of my music was deleted but luckily i had my files saved elsewhere.
I hope this helped! I know its frustrating and APPLE/ITUNES NEED TO FIX THE PROBLEM!!!! -
HELP NEEDED!! Recently upgraded my ipad air to the new update, charged it over night, now it will not come on? i plug in the charger but comes up the normal charging sign but still no life in it? Seems as though theres either a problem it charging or starting up. Had the ipad for about a year and a month or 2.. what can i do to source the problem?
Its just started up with the apple sign, then it goes to an off black coloured screen so its on but nothing showing just a dark screen but not jet black.. ahhh help!! thank you in advance
-
my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?
There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.
-
Lately when I plug my phone into my computer with my usb cord it will not show up on my iTunes. I want to sync my phone again but can't when it is not connected. How can I get my iTunes to recognize my phone?
You do not say what computer OS you are using, so here is the information for both.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
A song I purchased shows up in iTunes, but will not show up on my iPhone. When the phone is plugged into the computer, iTunes shows that it is on my iPhone, but it is not. How do I get that song to show up on my iPhone?
I have the same problem and it only affects the one song, everything else syncs
-
My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
Mid 2010 Macbook Pro battery will not charge after plugging in firewire cable shut down computer
I have a mid 2010 15" Macbook pro with Lion installed.
I was running off battery, and I went to plug in a firewire cable, not plugged into anything, and when I inserted it, the computer shut off.
The computer would not turn on again without being plugged into the AC adaptor. The magsafe charger shows green, but the computer says not charging. The battery is showing 57%, but the indicator lights will only light up when AC charger is connected..
I have let it sit off, and plugged in for a couple hours, and nothing chages, and let it sit overnight not plugged in, but nothing.
I have read other forums about the same issue,, it seems like its a common issue, and some have said what it could be, but no one said what it IS.
I have tried resetting the SMC and PRAM, but to no avail.
When i plug in the AC adaptor, the computer immediately turns on (which I find kond of funny), and I am able to turn it off normally, and it will stay off, and I can also turn it on if the charger has been connected from pervious.
Below is my power information.:
Battery Information:
Model Information:
Serial Number: W0013PVDXBX0A
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 157
Charge Information:
Charge Remaining (mAh): 3406
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5956
Health Information:
Cycle Count: 395
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11638
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 5
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 3
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00b9468c
Charging: No
Any help would be greatly appreciated. Thanks everyone.I have a mid 2010 15" Macbook pro with Lion installed.
I was running off battery, and I went to plug in a firewire cable, not plugged into anything, and when I inserted it, the computer shut off.
The computer would not turn on again without being plugged into the AC adaptor. The magsafe charger shows green, but the computer says not charging. The battery is showing 57%, but the indicator lights will only light up when AC charger is connected..
I have let it sit off, and plugged in for a couple hours, and nothing chages, and let it sit overnight not plugged in, but nothing.
I have read other forums about the same issue,, it seems like its a common issue, and some have said what it could be, but no one said what it IS.
I have tried resetting the SMC and PRAM, but to no avail.
When i plug in the AC adaptor, the computer immediately turns on (which I find kond of funny), and I am able to turn it off normally, and it will stay off, and I can also turn it on if the charger has been connected from pervious.
Below is my power information.:
Battery Information:
Model Information:
Serial Number: W0013PVDXBX0A
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 000a
Cell Revision: 157
Charge Information:
Charge Remaining (mAh): 3406
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5956
Health Information:
Cycle Count: 395
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11638
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 5
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Battery Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 3
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
RestartAfterKernelPanic: 157680000
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x00ba
Serial Number: 0x00b9468c
Charging: No
Any help would be greatly appreciated. Thanks everyone. -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section.
Maybe you are looking for
-
Can't restart Yosemite in Recovery Mode
I installed Yosemite on my mid-2012 MacBookPro yesterday, seemingly without difficulty. But: when I discovered that I didn't have permissions to read or write on anything, i ran Disk Utility. I tried Verify/Repair Permissions first, which discover
-
Is it possible to open a VI using an older version of LabVIEW, and if so how?
As stated in the title. I have installed all the run-times from lv6 to lv8.6, but cannot open any VIs that have been compiled in a more recent version of LabVIEW. We run (on different computers) lv5, lv6.1, and lv8.5. Upgrading some of the older m
-
How can I choose which e-mail addresses sync to my iPhone?
I have to add over 100 e-mail addresses to my phone book on my iMac. I do NOT want them all to sync to my iphone (4S). How do I do that?
-
ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE).
When trying to open invoices in my ERP inbox to authorise I get the following message. ERROR TRIGGERING DEFAULT METHOD FOR OBJECT (INCOMING INVOICE). . There might be an authorisation issue. but i am not confirm. I have checked the authorisation in S
-
Full Bar Signal but Unattended
sometimes even if my phone's signal is full bar and when someone tried to call me, they said that my number is unreachable. just like when your phone is turned off or you don't have signal. i tried on my other nokia phone, it doesn't have that proble