My editied soundtrack pro file only exports as the old, unedited version

I imported an AIF file that is the exported soundtrack to my FCP project. I had to export the soundtrack instead of sending the track directly to soundtrack pro, because the changes I made in sound track would not carry over to my FCP project. After I had edited my AIF file in STP I have tried exporting it as an AIF file to be imported into FCP, but everytime STP creates the file it is with the OLD audio. I have done this multiple times in different ways, but there seems to be no way to get my edited audio into my FCP project. Please advise. Thanks!

Similar Messages

Fat EQ in Soundtrack Pro does not export the mix!!!!

I am very frustrated. I have been trying to export a mix from Soundtrack Pro with a preset using the Fat EQ. How complicated can this be?????
I export to FCP6 as a AIFF file. How complicated can this be????? This software has a flaw. It will not turn my sound file from FCP which I import into STP. It works fine in STP but then will not convert into an AIFF by the time it gets to FCP/Desktop. All I get is a blank sound file. Not happy with this software so far. FCP6 seems fine. What the heck is going on here???
I am limited as to what I can mix in FCP6 with the audio tools. I thought STP could be helpful, but it is driving me up the wall!!!!!!
Please someone help me export my file some way so I can use the EQ's and mixers in STP like it is designed to do.
Frustrated with STP.
Rory

Yes, just a stereo file. STP version 2.0. Final Cut Pro 6. One of the filters worked once in STP 2.0, then it does not, it seems very finicky.
I am sending my audio files from the timeline to STP for audio editing. Then I apply the EQ once the project is in the main page of STP. Everything is good here, the EQ applied works, everything works just fine.
I then go to File >Export > Save As .... and then export it as a AIFF file. This is where something happens. It seems my fat EQ is working in STP, and then after it is exported back to FCP 6 there is nothing, nothing. There is an audio file, just no data at all, no sound waves.
The Autofilter seems to work when it is applied. It worked for the first 2 times anyway and then did the same as above. I am going to just edit audio at an external independent studio I think. I can't be bothered trying to figure this out for the duration of the project. It is too time consuming.
Sad Rur

When reinstalling soundtrack pro, i read skip on the installation dvd?

When reinstalling soundtrack pro, i read skip on the installation dvd?

Hi chiny, have you tried resetting NVRAM/PRAM?
-mj
[email protected]

Soundtrack pro is not included in the new logic pro 9 app?

Soundtrack pro is not included in the new logic pro 9 app? Where can I find it?

Hi
Soundtrack Pro was included in the Logic Studio and Final Cut (7) suites, and would appear to have been discontinued.
Unless you can track down a retail copy of either suite, you are out of luck
CCT

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one to no avail.

Final Cut Crashed and then corrupted the file. So Final cut wouldn't open up. I tried reloading the backup, trashing the prefs file, systematically going through the 3 previous versions and opening them by themselves one by one. I found Final Cut now loads but each of the backups and files in the previous 3 versions won't load. I've worked on the project for 3 weeks. Im suprised the backup files won't load either!?! I've only rendered 1 low res version. I am thinking I will have to rebuild the project in Final Cut 7. That is simply too risky to have all my back ups not load up!!

I'm a little confused by this?
Final cut now opens if launch older projects. But if I actually click on the project it crashes. Im not sure what you mean by events? I've moved them from the events folder.
but when I open up and of the projects the FInal Cut opens but then wont load the project even with no events in the FInal Cut Events folder.

Error message: file was skipped because the old remote file could not be deleted.. Later it will up

Error message: file was skipped because the old remote file could not be deleted.. Later it will upload after i try a few more times. Not at my size quota for website (I have lots of room) , have toggled Passive FTP ...keeps happening. Is there a way to fix this? Thanks! I am using DW CS5 on Windows 7 platform. This does not happen when I upload otherwise on my computer - only when using DW.
It also only happens with the html files - it does not happen with my jpeg files

Do you have notes in your site? DW's local and remote site synching might be off. Try clearing your cache.
http://forums.adobe.com/thread/494811
Nancy O.

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account and reseting it and it still only picks up the old messages? Anyone else having tis problem? ANy ideas how to fix it?

My Iphone and Ipad will not pick up my new email messages..for the last few days...I have tried deleteling the account (a number of times..) and setting the account back up? and it still only picks up the old messages? Anyone else having tis problem? Any ideas how to fix it?
This just started happening for no reason...no changes to the phone or Ipad?

my iphone and ipad will not send or receive emails or messages for the last few days. it is telling me that cannot connect to server

How can I import not only apps from the old iphone to the new iphone, but also the content of the apps?

How can I import not only apps from the old iphone to the new iphone, but also the content of the apps?

You can sync apps as you normally would, but I do not believe this copies over app specifc data (i.e. saved game status/scores).
You can always restore your new device with a backup from your old device.

HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over.

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

HT1888 Where can i download the Vista system support drivers? It's only giving me the Windows 7 version...

Where can i download the Vista system support drivers? It's only giving me the Windows 7 version...

I'm a lousy guesser so if you give more information on what year/model MPro and what MacOS version your running it'd sure help? Two different OS's two different ways to install.
If your running 10.7( Lion) then Apple no longer supports XP OR Vista and no longer makes Boot Camp drivers for them.

How can tell the script I want to save unsaved files but not replace the old one?

Hi everyone
I got this script
var docs = app.documents;
for (var i = docs.length-1; i >= 0; i--) {
    if (docs[i].saved == false) {
        docs[i].save(new File(“~/Desktop/Document.indd”));
        docs[i].close();
    else {
        docs[i].close(SaveOptions.YES);
close and save files
but if I have two or more files, I want to save files like Doc1, Doc2...
the new file will never replace the old one
Can some one tell me how can I do that?
Thanks
Regard
Teetan

Hi,
Change the 4th line like below:
        docs[i].save(new File("~/Desktop/Doc" + (i+1) + ".indd"));
Vandy

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

I'm about to transfer the contents of my existing HDD in my (dead PSU) iMac to another computer. I'm just wanting to know if and how I will be able to access my files and documents from the old hard drive once I've made the backup?

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

In Soundtrack Pro I want to change the key of the audio but the feature is greyed out

Hi.
When I work with an audio file in Soundtrack Pro and want to raise or lower the key of the audio
the choice is greyed out and so is change tempo. I am selecting the region and the track but
those 2 features are grey and can't be used. Is there anybody who knows why and how to get
them. Thank you for your time and patience.
Walter

I have no idea if it's legal or not, but you could use a proxy software to "spoof" your location.

I'mtrying to upload my photos to shutterfly I've gone to file and export then the window gives me the option of file export webpage quicktime and slideshow . on my macmini I have shutterfly on there also how do I get this on my new mac

I go to file and export then a window appears with file export, webpage,quicktime and slideshow. On my mini I have shutterfly as an option and don't remember how to do it. What do I do to input this info so that shutterfly becomes an option

Hi Barbara
Are your photos in iPhoto or are you using some other Photo Software?
The latest version of iPhoto is a lot different than iPhoto 6 for example. In iPhoto 06 you could burn the Originals from your User Picture Folder using Finder, while in iPhoto 11 it is best to burn them from within the iPhoto Application.
Open iPhoto and select the Event(s) that you want to burn onto the CD, then select Share on the menu bar and click Burn in the drop down.
http://www.apple.com/support/iphoto/
Then again, maybe you got a bad batch of blank CD's and need to try another?
Dennis

My editied soundtrack pro file only exports as the old, unedited version

Similar Messages

Maybe you are looking for