My Elements 9 is not responding when started Windows

My Elements 9 is not responding when started Windows.

Without proper system information and otehr details such as the crash log from the Event Viewer nobody can say much.
Mylenium

Similar Messages

Cs12 trial not responding when installed, windows 7 64bit...how to fix??

cs12 trial not responding when installed, windows 7 64bit...how to fix??
Not a very good recommendation for buying the app!!!!
Does anyone at Adobe follow these questions??? If so please respond (your app will not!!)

Hi wcarlstrom,
Adobe CS12 is unheard of. Adobe Creative Suite's latest version is CS6.
Please be specific as to what software you are trying to install, OS version etc so that I may be able to help you.

Program not responding when starting the second time.

I am currently only using the DASYLab program to find the temperatures recorded by nine different thermocouple wires. On the Worksheet window, I can run the program once with everything running perfectly. If I stop the program and restart it again, it crashes. If I go into the Layout window and try to run it at all, it will not respond on the first try. This happens every time and it doesn't matter what measurement timebase I set it to.

To accurately diagnose your problem, we need the following information. If you do not want to publically post it, you may request DASYLab support at www.dasylab.com or www.mccdaq.com, or call Measurement Computing directly (US) at 508-946-5100.
DASYLab level and version, for example, DASYLab Full V12.0.0 (see the Help-Report)
Your DASYLab serial number - if you post, just the last 5 digits
The operating system
The DAQ hardware and the software version of its drivers
The offending worksheet
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Enterprise DNS servers are not responding when using Windows NLB with Direct Access 2012

Hi
We have installed Direct Access 2012 as one server installation:
- Two network cards. First one in DMZ and second one in internal network
- Two consecutive IP addresses configured in DMZ because of Teredo
- PKI because of Win7 Clients IPSec
- Our corporate network is native IPv4 so we use DNS64/NAT64 and DA-server is configured as DNS
- DA-servers are VMWare virtual machines
One server installation works fine and now we want to use Windows NLB as load balancing. NLB installation goes fine too,
but problem is DNS. If we still try to use DA-server as DNS there comes error message below
None of the enterprise DNS servers 2002:xxxx:xxxx:3333::1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
When trying to configure DNS using Infrastructure access setup, DNS cannot be validated when using DA-servers DIP or cluster VIP. Only domain local DNS looks to be ok but those have no IPv6 addressess. So how DNS should be configured when using multicast
NLB?
Tried to remove name suffix then adding again => Detect DNS server => DA-server IPv6 address found => validate => The specified DNS server is not responding...
Then tried to ping detected address => General failure
NLB clusters are configured as multicast and static ARPs are configured too. Both clusters can be connected from those subnets as they should be.
Any clues how to fix this?
~ Jukka ~

Hi,
Your question falls into the paid support category which requires a more in-depth level of support. Please visit the below link to see the various
paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Adobe Elements 9 not responding when saving changes

Adobe Elements 9 says not responding when I save image changes. I does eventually save the image changes but takes awhile. Is this normal? My computer is rinning Windows 7 and I have 8GB of ram so I don't think that ram memory is the problem. Thanks

In other versions of photoshop elements, you don't get the not responding
thing at the top of the screen when saving png files, but it still takes a noticeable
amount of time to save png's in other versions of photoshop elements and the full
photoshop version.
I haven't been able to find it yet, but there is a post somewhere in the photoshop forums
where an adobe photoshop engineer explained why png's take longer to save than most
other file formats, but ssprengel said something about the compression of png's which
sounds like the gist of the post.
There have been more than a few complaints about the not responding messages in pse 9
on windows machines for various operations, but as far as saving images, the not responding
message doesn't seem to hinder saving files, but it is very annoying.
You might try posting here where several adobe employees answer questions:
http://feedback.photoshop.com/photoshop_family/topics
MTSTUNER

When i try to use facetime on my imac it comes up with facetime not responding and starts to use nearly 2gb of memory. Any ideas please?

when i try to use facetime on my imac it comes up with facetime not responding and starts to use nearly 2gb of memory. Any ideas please?
Also messages does the same thing

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

I tookyour suggestion and SUCCESS! I can now access the Itunes Store. A simple fix, and thanks so much!!.
Below is the advice you forwarded:
I found a solution to my problem.
> start menu
> accessories,
> right click on the command prompt icon and choose "run as administrator".
Once it opens, type in the following command...
netsh winsock reset
hit enter
You should get a message that the winsock reset successful and you will need to reboot your computer.
Reboot and when I reloaded itunes the store loaded fine.
Thanks again, -Dean Stoneburner

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Adobe Reader 11.0.0.9 not responding on start up.

Adobe Reader 11.0.0.9 has been not responding on start-up resulting in a program crash. This also has been happening when trying to print. I've tried uninstalling the program and re-installing with no luck. I've also tried using the uninstall utility and re-installing Adobe Reader 11.0.0.9 and it will still crash just a few seconds after starting up.
Any ideas what might be causing the problem?

Thanks for the quick response, unfortunately it'll lock up before I am able to make the change.
The fix we had been using is to set it into WindowXP compatibility mode and launch the program. When launched in compatibility mode it starts with a prompt that allows you to disable enhanced security on start up. The deal breaker with that is that non admin users are required to enter admin credentials when launching Adobe.
I'm just curious why on a brand new clean installation of Adobe reader, on a brand new clean installation of Windows 7 Professional, is crashing on start-up. Are there any known issues caused by group policy?

I am having autocad not respond when I am making a pdf using autocad 2002 and adobe acrobat XI

I am having autocad not respond when I am making a pdf using autocad 2002 and adobe acrobat XI
We have adobe acrobat 8 on another system that seems to work fine, what elsedo we need to do to get this trial version to work properly.
We are able to get everything set up , sized, etc, but when the actual process starts it is stating "autocad not responding and it just spins and never makes the actual final pdf.
Any help on this would be appreciated

It's probably a compatibility problem with the updated PDF libraries vs. you hopelessly old ACAD that can't be resolved. In any case, I'd consider it one of those things of trying to attack the problem on the wrong end. All major CAD programs have native PDF export these days and even ACAD has had since v2006 at least...
Mylenium

Photoshop Elements 13 is not responding

I have downloaded Photoshop Elements 13 and when I go to extract files it almost completes and then it says Photoshop Elements 13 is not responding. What can I do to fix this?

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Adobe elements 10 is not responding--program keeps crashing

I have elements 10 and it is forever crashing with message "Adobe Elements 10 is not responding."

Ken, thank you for responding.
When I get the error, I’m given two options, cancel the program or wait until Elements 10 responds. Some time if I wait long enough it will respond but only to crash again. This seldom happens in Editor.
This is a new catalogue on the new computer. I never had this problem with earlier versions of Elements—only with 9 and 10.
Thank you,
Robert

After effects cs 5.5 not responding when I open up a project file

I was recently working on an intro for a youtube channel and my project had been running smoothly the night before. But now all of a sudden I open it up today and it starts not responding when I try and open the file. It is running on a mac with 8 GB of memory and a 2.1 GHz intel i7 processor, I have no idea what's happening and I really need help. Thank you for your time.

I can understand that my info was vague, but I am as well a novice in after effects. I have a good bit of experience with it, but not a professional standard. I have 1 video file of average length, a photoshop file, and a word layer, no other effects really. My comp size is 1280 by 720, and I don't know what other info I could give. My other projects run fine, it seems to just be this one now that you mention it. Should I try starting a new project and just working off of that? I can understand that you need to know a lot more, but I was also just asking a general question because I felt that it might be common issue of a setting that I may have had to change, so I'm sorry my info was so vague, but that was my reasoning. I don't believe that saving and backups are my problem, but if you believe it's a means to the solution then by all means please justify that. Thank your for your time and help.
Trey

Lots of programs does not respond, when opened

Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
To close, I have to click on finder first. What to do ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My mac book safari always not responding when i klic on sidebar

my safri always not responding when i klic on sidebar pleas help me to solve this problam

Jasmin325<
Also please include your model, year, which OSX you are using, this will help anyone reading this to offer advice.
https://discussions.apple.com/docs/DOC-5431
A couple of shots in the dark here.
Try this, start in safe mode and see if it will go. Power it off, power it on holding the shift key, continue to hold the key till you see a progress BAR, then release and see if it will finish booting. If it does login see if thigs work, then log out and try booting normally. (NOTE that this takes considerably longer,be patient)
Another thing you can try is powering it up holding the OPTION key and see if the start up manager brings your HD up on the screen, if it does click on that and see.

My Elements 9 is not responding when started Windows

Similar Messages

Maybe you are looking for