My elitepad 900 tablet shows missing serial and modle # after bios uptae

My tablet started to show the missing serial and product number after i have upgraded the bios to the latest version.  now my windows 8.1 is asking to reactivate windows.
i have not changed the board or any other hardware update. what i did is only drivers and bios updates after i upgraded dro windows 8 pro to to windows  windows 8.1 pro.
please help to get it resolved.
thanks
Raees

Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

Similar Messages

  • Elitepad 900 tablet shows missing serial and product info when booting

    Hi,
    i recently updated my tablet from windows 8 to windows 8.1 and then updated bios. after this upgrade on boot screen it shows missing aerial number and product info. please note that i have not changed the board or any other hardware. please help me to resolve this.
    regards
    Raees

    Hello Malik-Raees,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps!
    Best regards,
    I worked on behalf of HP.

  • Not showing missed calls and dropping calls

    I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported  this and I received a refurbished phone and still have the same problem any know issues with this?

    Hi bbarront,
    I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device.  Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail?  I look forward to hearing from you soon.
    Thank you for your involvement in our community forums,

  • Not able to open a PDF file in Creative Cloud Illustrator. It shows missing links and so forth

    I'm working on CS5 and saving my AI files as PDF. This is all for print, I have created the outlines, and flattened transparency between an image I had placed in on the PDF. My CreativeCLoud AI is not able to open the PDF. It shows that it is missing links. How do I fix this?

    Provide the files linked to.

  • Show missing Type and count as 0 using t-sql

    Hi All,
    I have a table with 3 columns, let say  EventSchedule,ScheduleType,Count
    EventSchedule      ScheduleType     Count
    Conference            Type1         25
    Meeting               Type1         20
    Meeting               Type2         22
    Appointment           Type1         40
    Appointment           Type2         35
    Appointment           Type3         55
    I want t-sql to show output like this..
    EventSchedule      ScheduleType     Count
    Conference            Type1         25
    Conference            Type2         0
    Conference            Type3         0
    Meeting               Type1         20
    Meeting               Type2         22
    Meeting               Type3         0
    Appointment           Type1         40
    Appointment           Type2         35
    Appointment           Type3         55
    Presentation          Type1         0
    Presentation          Type2         0
    Presentation          Type3         0
    Note:
    1)The EventSchedule column will always have values - Conference,Meeting,Appointment,Presentation         
    2)The ScheduleType  column will always have values- Type1,Type2,Type3
    In the above sample source data ,there was no Type2, Type3 for Conference and there was no Type3 for Meeting and there was no Type1 , Type2 and Type3 fpr Presentation. So whenever if any Type is missing it should populate that missing Type  with count
    as 0.
    Create statement;
    Create Table Sample (EventSchedule varchar(20) null,ScheduleType varchar(10) null,Count int null)
    Insert statement:
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Conference','Type1',25)
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Meeting' ,'Type1',20)
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Meeting','Type2',22)
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment','Type1',40)
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment' ,'Type2',35)
    Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment','Type3',55)
    Thanks!
    sql

    Hi HoroChan-
    This is the solution I found. I created 2 cte's. In first CTE I created the list with 1 to 12 numbering and did left join with the second cte(source data).
    WITH myListCTE AS (
    SELECT 'Conference' AS EventSchedule ,'Type1' AS ScheduleType, 1 AS Rn
    UNION ALL    
    SELECT 'Conference' AS EventSchedule, 'Type2' AS ScheduleType, 2 AS Rn 
    UNION ALL       
    SELECT 'Conference' AS EventSchedule, 'Type3' AS ScheduleType, 3 AS Rn         
    UNION ALL
    SELECT 'Meeting' AS EventSchedule,'Type1' AS ScheduleType, 4 AS Rn   
    UNION ALL     
    SELECT 'Meeting' AS EventSchedule,'Type2' AS ScheduleType, 5 AS Rn 
    UNION ALL       
    SELECT 'Meeting' AS EventSchedule,'Type3' AS ScheduleType, 6 AS Rn        
    UNION ALL
    SELECT 'Appointment' AS EventSchedule,'Type1' AS ScheduleType, 7 AS Rn
    UNION ALL         
    SELECT 'Appointment' AS EventSchedule ,'Type2' AS ScheduleType, 8 AS Rn      
    UNION ALL  
    SELECT 'Appointment' AS EventSchedule,'Type3' AS ScheduleType, 9 AS Rn    
    UNION ALL
    SELECT 'Presentation' AS EventSchedule,'Type1' AS ScheduleType, 10 AS Rn
    UNION ALL         
    SELECT 'Presentation' AS EventSchedule,'Type2' AS ScheduleType, 11 AS Rn
    UNION ALL        
    SELECT 'Presentation' AS EventSchedule,'Type3' AS ScheduleType, 12 AS Rn         
    , myCTE AS (
    SELECT EventSchedule,ScheduleType, Count
    , Case WHEN EventSchedule='Conference' AND ScheduleType='Type1' THEN 1
           WHEN EventSchedule='Conference' AND ScheduleType='Type2' THEN 2
           WHEN EventSchedule='Conference' AND ScheduleType='Type3' THEN 3
           WHEN EventSchedule='Meeting' AND ScheduleType='Type1' THEN 4
           WHEN EventSchedule='Meeting' AND ScheduleType='Type2' THEN 5
    WHEN EventSchedule='Meeting' AND ScheduleType='Type3' THEN 6
    WHEN EventSchedule='Appointment' AND ScheduleType='Type1' THEN 7
    WHEN EventSchedule='Appointment' AND ScheduleType='Type2' THEN 8
    WHEN EventSchedule='Appointment' AND ScheduleType='Type3' THEN 9
    WHEN EventSchedule='Presentation' AND ScheduleType='Type1' THEN 10
    WHEN EventSchedule='Presentation' AND ScheduleType='Type2' THEN 11
    WHEN EventSchedule='Presentation' AND ScheduleType='Type3' THEN 12
    END AS NewRn
    FROM Sample
    SELECT mlc.EventSchedule,mlc.ScheduleType,ISNULL(mc.Count,0) AS Count,mlc.Rn
    FROM myListCTE mlc
    LEFT JOIN myCTE mc on mc.NewRn=mlc.Rn
    ORDER BY mlc.Rn
    Thanks!
    sql

  • 7210 shows missing disk and I cannot add it back in

    I have a 7210 which thinks it has two missing drives. The drives are present and have no fault light on them.
    I have tried physically removing them and reinserting them to no avail.
    The console reports the following during boot:
    WARNING: /pci@1,0/pci10de,376@f/pci1000,1000@0 (mpt5):
    SAS DISCOVERY ERROR: Port=0x4 DiscoveryStatus=0x2 (Unaddressable device)WARNING: /pci@1,0/pci10de,376@f/pci1000,1000@0 (mpt5):
    Cannot access device - assigned to another host (affiliation failure). WWN=1221000004000000 target=4
    We are running latest firmware:
    ak/SUNW,[email protected],1-1.11
    Any ideas as to what is wrong and how I can fix it please?
    Edited by: mlasham on Mar 23, 2010 12:22 PM

    Turned out to be a faulty hdd which was replaced and all is well

  • Missing records and history after Crystal Reports Server v0 to v1 upgrade

    I went though and followed the steps outlined in this video
    http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/5048d962-8fa6-2c10-e2ae-d32b3562cb9c&overridelayout=true
    during the export and import a few things failed,
    now i am hearing this from our report writers...
    It looks like we still have some problems. Some reports that run and go to a file location failed. Error Message: destination DLL disabled. []: [CrystalEnterprise.Smtp]. Plus we didnu2019t get our alert email that these failed.  When I looked at the instance manager and had it show recurring schedules it only came up with 61 instances. That is not correct when you consider that some reports have 30 instance each because of it going to multiple locations. One report that I know that runs daily, Broken Apptu2019s with appointments is missing its history and schedule recurrence.
    Strange how some of the schedules are ok and others are gone.
    can anyone help me? I hate crystal reports and I hate SAP this whole experiance has been a 3 month long nightmare.

    i put in a ticket and they walked me through a different way of backing up and restoring the CR

  • Missing notes and documents after using migration assistant

    Hey there,
    I recently "killed" my macbook with a glass of water and tried to at least save all my documents, notes, safari-bookmarks and anything else from the hard disk.
    I managed to copy all my word / excel documents and downloads and photos etc. manually to another mac, but I'm struggling to find my notes from the desktop bar. I tried using the migration assistant to get them from the hard disk to the new mac, but they are just not showing up, when I open the notes on the desktop bar of my migrated user account on the new mac. Also none of my documents, which I copied manually to another user account before, are showing up. Except for my Safari bookmarks and contacts nothing seems to be moved to my new mac.
    Has anyone dealt with this problem, too and knows how to get the notes back? Restarting the mac didn't help.

    If the 2 computers have the correct cable connections, try the Target Disk Mode.
    Target Disk Mode - Mavericks

  • Missing email and folder after Move Mailbox

    We are using Exchange 2007 SP3 and Exchange 2010 SP2 with RU6.
    I just start migrate the user from Exchange 2007 to 2010.
    by New-MoveRequest -identity user - targetDatabase
    1 user compliant he miss many folder and email
    IN the Exchange Move Request Log said Complete and
    in the Request Log, the Regular items is 12615 and 4.129 GB 
    but in lower part, only see 92950 messages and 2.52 GB had been complete.
    Any Ideas? not all folder, just some folder, is that Folder limitation or my powershell not correcT? 
    Now, in Exchange 2007, I cannot see his mailbox in disconnect mailbox, so I need to restore from Backup as well.

    Would be curious to hear what MS says about this, however that said to recover whats missing you would need to recover that DB to RSG and then either use a 3rd party tool to access the offline copy of the DB, or use the RSG method to recovery to a temp
    mailbox on 2007 and then export to PST and compare with the migrated mailbox.
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • 3rd Generation iPod shows "plug" icon and arrow after restore

    ...and nothing else.
    Attempts to turn it on result in the apple logo appearing and then the plug, then it dies.
    Tried plugging it into the computer. Tried plugging it into the wall. Nothing.
    Won't go into disk mode.
    Any ideas?
    Thanks in advance...

    Update:
    I took it to the Apple Store and the guy tried to convince me the hard drive was probably dead, but after I begged him to take it to the back and try it with their cord, he came out with a resurrected iPod. He said he pressed the case together very hard (I had recently installed a new battery), and then plugged it into their power source, which finished the restore (I guess).
    Now it's working again. So don't give up on your 3rd gen when you see that sign. I think all it needs is a good strong power source, (not from the computer firewire port), to finish the job.

  • I installed Photoshop Elements 13 from DVD with official serial # and then after a reboot, I do not have authority to access my software

    I do not want creative cloud, I have purchased the software. During setup asked to download Adobe Installer, which fails to install and recommends Adobe Support Advisor, which has been discontinued.  All I want is to use my legitimate PhotoshopElements 13
    HELP

    ok. Install it as described in this tech note
    Download Photoshop Elements products | 13, 12, 11, 10

  • Mail.app missing accounts and prefs after system force-quit

    My Macbook wouldn't wake up from sleep, so I force-quit it, and restarted it, and now Mail.app is giving me the "Welcome to Mail. You'll be guided through the steps to set up your mail account" welcome screen.
    I entered one of my mail accounts, and it wouldn't let me set it up as POP - only IMAP. Once I got past the set up screen, all my accounts and preferences were gone, but my mailboxes were still there with all the messages I've archived.
    How do I get my accounts and preferences back?
    I tried this: ttp://discussions.apple.com/thread.jspa?threadID=2791513&tstart=0 - it didn't work for me.

    etatoby,
    Good info, but we are all users here just like you. Apple does not read these posts (as far as I know) but you can forward this to Apple at the following link.
    http://www.apple.com/feedback

  • Satellite P875 turns off immediatel​y and loop after bios update /vrsion 6.30

    Hi
    My satellite P875 turns on and immediately turns off since I did an update of the bios (v 6.30).
    When the battery is connected and power wire too, it turns on then turns off in a loop.
    With the battery, and power wire unplugged, the loop stop and the laptop just turns off.
    Nothing on the screen because it turns off immediately.
    If someone has any Ideas...
    THis laptop is new( a few weeks) and runs windows 7
    Thank you in advance
    telka
    UPDATE:
    I tried this: Fn+F+ start, it last a few second more, with the sound of the fan, and then turns off again.

    Short story, you bricked your box, and whatever time you spend trying to find someone in the world to tell you different and all the time you spend here answering follow up questions will be odyssey land wasted getting right back to the start of this sentence.
    Either this forum or others will ask you for model number details and suggest "flash fixers" that might or not repair your bricked system and always at the expense of your warranty.
    The sooner you call tech support and convince them it wasn't your fault the faster you'll get your new toshiba replaced with a refurb. Backup up your important hard drive data cause you're not guranteed to get the same drive back either.
    "hello, hello, IS THIS THING ON ?!?!!??!!! --Mr. Tinkles "

  • Elitepad 900 Windows 8.1 and Kaspersky Endpoint security 10

    hello
    I encounter a problem with the HP tablet elitepad 900 Windows 8.1 ( only) and Kaspersky endpoint security 10 .
    After the test, I realized that when the components of Kaspersky were active , the tablet had problems booting. ( Freeze at HP logo and blue screen)
    If someone in the solution.
    Thank you in advance.

    Hello romka18.
    I am sorry you are having trouble with the auto-rotate.
    To turn on auto-rotate, bring up the charms by swiping from the right hand side and search on "resolution". You may need to select that you are searching within "Settings" and not "Apps".  One of the settings for resolution is "Adjust Screen resolution", please select that and it will take you to a screen that has a checkbox that lets you enable "Allow the screen to auto-rotate".
    There is a good 2 minute video of this on YouTube at: http://www.youtube.com/watch?v=OtiuFLyoGoA uploaded there by Jeffrey Lush.
    I hope that helps!
    I am an HP Employee

  • MSI Prime 8.1 tablet show logo and fireworks, then repeatedly reboots in a loop.

    MSI Prime 8.1 tablet show a logo and fireworks, then repeatedly reboots in a loop.  Any way to fix this or reset it?
    Thank you

    Update the FW by following the instruction and see if this can help.
    Download link:
    http://download.msi.com/archive/frm_exe/N821_v4.5rc5_v4.4_20140414.zip
    Update Guide:
    http://www.msi.com/files/pdf/Primo73_75_81_91_93firmware_recovery_en_21.pdf

Maybe you are looking for