My emails will not post

For the last few days my emails will not go further than the outbox, they are replies and new emails, but none will actually sennd out.  Is there anything i can check on the iPad as this is really annoying.
Laura

Hi Tom,
I have tried everything that has been written about the problem, unfortunately, nothing has worked and since the original email problem, my connection to iTunes and Apple had also crashed.  I then resorted to calling Applecare Protection Plan as I had paid for the extra two years cover as I live in Spain and wanted the extra cover.
The contact at Apple, Ireland, has tried everything to resolve the problem, re-setting the iPad to Factory settings and downloading all my contacts and Apps onto iCloud then back onto the iPad........  The iTunes and Apple App are now functioning correctly, BUT the email situation is not resolved and the problem is going to be looked into fully and my contact hopes she will find a solution as she hasn't come across this before.
So at the moment I can send out a new email, but if it is replied to and I then reply, the email stays in the Outbox and will not move.  So thank you for your help but my case is not yet resolved.
regards Laura

Similar Messages

  • Email will not setup "Do you want to try setting up the account without SSL"

    email will not setup, get  message  "Do you want to try setting up the account without SSL"

    Is that a question? hard to tell
    How about some info
    What email (yahoo? gmail? compuserve?)
    On what (the ipad? vista?)
    Did you do anything in response to the question other than post here?

  • In need of some help :( p55 big bang fuzion will not post

    For some reason my system will not post. i switch my system on and  everything on the board lights up all the drives spin up, gpu spins up, but it will still not post iv checked the gpu and it dose work fine, iv checked the ram to find out that one of my ram sticks has gone. iv tired booting with the stick that works with no luck neither.
    would really like some advice please
    My Current System is : i7  875k [email protected] GHz,on OC Genie- - P55 Big Bang-Fuzion (MS-7582)- -BIOS v1.5 --CORSAIR CMT4GX3M2A2133C9 4GB 2133MHz, 9-10-9-27, 1.65V, with Intel XMP -- NSI R5850 Twin Frozr II-- Real Power M520, with two WD Caviar Black 500 GB SATA Hard Drives ( WD5001AALS) in Raid 0

    like Xmad said get a good 600W PSU from a trusted manufacturer of a single +12V kind. split rails are only good when there very high ampage ones (over 30A per rail) and the single rail ones are a better pick all-round!
    and like Xmad also pointed out id also recomend a Corsair or seatronic unit of 600W or more!
    it doesn't matter how the power went out as any thing that pulls over the load a PSU can supply will fead back and cause damage to the PSU itself!
    alot of PSU makers cannot be trusted much as they put lables on the psu that are no where neer the real units performance level as they use a bench version that have uprated VRM's and bigger heatsinks and high end refrigerated coolers to stop them overloading thats totally un-realistic!

  • My icloud email will not load

    Hi!
    My icloud email will not load.
         On any computer, Mac or PC at the icloud.com it will not load and sends an error message to apple.
         On my Mac it states that my password or email address is incorrect.  This is not true as I have changed it and all other apple accounts work.
         On my iPhone it states my password is incorrect--it is not, again I have checked and re-entered it numerous times.
    I have checked and done all the troubleshooting I can find.
    I have checked all the communities and it seems some others are experiencing this same problem.
    I have called apple support and (of course) they want me to pay for someone to help me--which I would do if this was an issue with my hardware or software.
    I have an appointment today with the genius bar at my local store.
    I believe this is an apple icloud server issue.
    I would not be posting if this had not been happening since Christmas day.  It has been over a week since I have been able to retrieve my email.
    If anyone can help that would be wonderful, but please do not refer me to the troubleshooting pages as I have researched them extensively.
    Thank you!

    This same thing started for me today as well: None of my devices (iMac, MacBook 2 iPhones, iPad, 2 Apple TV's) which require Apple ID to work for mail, etc., would work this morning. I kept getting a message that my password or email address was incorrect. I was also notified my Apple ID password had "a security problem" and needed to be changed.
    I was reluctant to change the password with my Apple ID, since I have been using it for nearly ten years, and will clearly never forget it. However, this old password only has six characters, all lower case. Apple now seems to want a password with at least eight characters, one of which is capitalized, etc. I went ahead and changed to a new 2012-model password, following Apple's guidelines, and voila, once I changed to that password on all of my devices they all work as they should!
    What the heck? I guess I didn't have anything better to do between 10:00 and 11:00 am today anyway. While this seems like the right fix, I would have preferred it if Apple had sent out an advance notification that they are requiring more rigorous passwords, rather than just rejecting our old ones as a New Year's present. It would have saved some head scratching.

  • Exchange email will not sync

    Re: Iphone 4; I have two email accounts on Exchange: Gmail and a work email.
    For the past week my phone will not push the new emails to my phone. I have it where I fetch my emails manually. I'm getting the spinning wheel of death and it says "Checking for mail", but the emails will not show up.
    Something seems to be sucking the battery life out of my phone. (Is this related?)
    What I have done: Reset the phone; deleted the email account and added it back on. Nothing seems to work.
    Everything else on my phone seems to be working fine.
    Jenn

    Hi,
    Please check if this issue affects all activesync users. If only one user is affected, please check if this user is in quarantine list.
    And you can enable the ActiveSync Mailbox Logging and then check if there is any related information.
    Exchange ActiveSync Mailbox Logging
    http://blogs.technet.com/b/jasonsla/archive/2013/03/19/exchange-activesync-mailbox-logging.aspx
    Best regards,
    Belinda Ma
    TechNet Community Support

  • K7n2 Delta-6570 Will Not Post

    I have k7n2 delta L --6570--amdxp-2500-512 mb pc3200 ram. powmax 400w power .ati 9600 all in wonder. I swapped all parts to a better case to fit a certain location and the system will not post at all. the diagnostic d-bracket has number 1 and 4 in red while 2 and 3 are green. the book only tells me that the processor is initializing with a note saying this will show information regarding the processor (like brand name, system bus. etc. but nothing will show on the monitor. everything was working fine before the swap. i have checked everything i can think of. i would appreciate some advise. sorry if i haven't posted all the proper requrements and spec's. thanks. paul k.

    i reset the memory and cpu and video card. i think i disconnected everything in the case a couple of times to make sure it wasn't a simple blunder. nothing! i have a friend that wants to try look at it i may do that. also tomorrow i will try to post all my info like the rest of you guys have done. i'll give it a try anyway. also i done the other things you mentioned, i forgot what the questions were. you can't see the post info that i am replying to keep checking so i can answer properly and i forget things.
    thanks
    paul k.

  • Exchange email will not work when offline

    Anyone know when Apple will fix this issue?  Email will not work correctly unless connected to wireless.  This makes it impossible to be productive while flying.  This is exclusive to exchange servers as it woks on POP accounts.  

    I know that.  When I work on my laptop I can file, reply, delete etc. and when I land it updates all the folders and sends and recevies all the mail.  the iPad will not let you file or delete emails unless connected.  This makes flying time completely unproductive.  If I have to have a laptop to do email why have an iPad???

  • Email will not let me change fonts all of a sudden.

    Email will not let me change fonts all of a sudden.  It says I don't have the neccesay permissions in ~/library/preferences.  this has just happened recently.

    Who is your email provider?
    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
    If yes, try deleting the mail account and adding it again.

  • Email will not send

    Email will not send , but I can receive ?

    Are you getting any errors when you try to send? Or does it just get stuck in your outbox sending? Simple thing to do is reset your iPad by holding down the home and power button until you see the silver apple then just let the iPad start normally. If the issues still persist as mentioned above got to Settings>mail, contacts, and calendars and just turn of mail then turn back on. See if you get any errors if not check your mail again and attempt to send the email. If all above fail. Go back to settings and then mail, contacts, and calendars then select the email account that you are having issues with then delete the account. Once deleted select the option to add account and re add your email account back to your iPad. Let me know if this works for you.

  • Email will not always sync

    periodically email cannot be received and no error message received.  Problem passed on to Verizon and Samsung with no known solution.  Real problem is not knowing for sure when email is working correctly.  Sending emails always works but test messages will not even go to device at times.  Samsungs answer was maybe the Android 2.2 will fix the problem.  Tried deleting accounts and re-adding, removing battery (works for a while), total reset and problem still comes back.  Using a popmail through Yahoo and a hotmail account.  Also have same problem deleting emails as mentioned previously in this forum. 

    How will that fix the problem?  I have been using the refresh and load more messages options on the email accounts.  There are extended periods throughout the day that email will not be received.  Samsung did not have a solution and neither did Verizon technical support.  There are several others with the same issues.  We should not have to do manual syncs and it is a sporadic problem. 

  • K8T Master2-Far Will not POST unless CMOS is freshly cleared!

    Hey all, thanks for helping out.
    I came back to my computer one day to find it in a coma. The system was on, but the screen was getting no signal and would not come on by moving the mouse/keyboard like usual. I thought that maybe it had turned off the monitor for power save and then frooze some how. After restarting the computer I found that it was still doing the same thing. I shut down the system and unpluged. After waiting about 5 min i plugged back in and flipped the switch on the powersupply. This started the computer right up (even though i had not pushed th power button) and left it in the same condition as before. It simply would not post. After closer inspection I found that it was not posting because it wasn't getting far enough in the process before it was being restarted. I checked the restart button and even went as far as removing it from the motherboard. This did not help. I knew it was restarting because i could see it checking the optical drives then waiting for about 4 seconds, then a weird noise from the speakers (like a soft cruching so to speak) would happen, then it would do this all over again, non stop. That noise was familliar though, it was the normal noise that I hear when I push the restart button (I'm guessing a release of electricity etc..) so I knew what was going on.
    After switching the memory out and in all orders, I stripped the system down to the bare min. This however did not change anything. I put the system back together and flashed the cmos. This made the system restart once, then "BEEP" it posted. It said CMOS Checksome Error - Defaults Loaded. I first pushed DEL to get into the bios. I changed everything back to how its suppost to be (time, apature, etc...) then saved and exited. This made the system go back into its restarting state. I then flashed the cmos again and pushed F1 to continue. The system booted up just fine. In safemode of course. Then i restarted. It then went back into its restarting state. I flashed the bios again. And after pushing F1 to continue selected it to go into windows normally. Everytime it does this it gets different results. One time it got past the windows xp loading screen and sat at the black screen before you get your curser and welcome screen (sigh... restart... flash..). It also once got in just fine, and after about 5 min got a blue screen about "bad pool caller". It most the time however gets a random blue screen right after you see the welcome screen. These blue screens consist of "bad pool caller", "IRQ Equal or Lesser Value", or No notes, just generic blue screen.
    If i change anything in my bios it will not post. If i dont flash the cmos, it will not post. If i dont change anything in bios and continue, then restart, it will not post. The only way for it to post and for me to see anything on the screen is to flash the cmos. I thought it might be the power supply, but the only extra i have does not have the extra plug to power the 2nd cpu. After thinking about it though. I dont know if it could be a power supply issue, if it was then would it even load up into safe mode? Or why would it not load up into safe mode again after restarting. I have tried an extra stick of memory that i know works in a separate computer, but nothing changed. I have tried a different videocard... nothing changed. I have removed everthing accept the basics (motherboard, cpu's,videocard,memory,psu) and nothing changed.
    I have worked on this for about 1 week now and can not figure it out. I have my useless MCSE/CSE/A+ certifications (I say useless because I dont have a job that uses them) but this one is beyond me. If anyone could help I would appreciate it.
    Thanks,
    Brandon
    P.S. I dont know if this is related, but I did have to change from useing the DVI connection to RGB plug to even see anything once I heard it post. I was useing DVI before, and once i figured out that it would post after flashing cmos, I had to change to RGB to get any visual. The DVI will not work now at all. I have even tried changing cords. The DVI wont work in safemode either. Thanks

    I reckon these mobos have a fault that really needs to be sorted.  You say that your PC was working fine using PC 3200 memory with 240's. I have a similliar problem, I am using 246's with Kingston' PC3200 KVR333X72RC25/512D 2.5 ECC REG.  The PC worked fine for about two weeks and then one day went on a blink, every time I power it up all I get is beeps.  I was forced to order new BIOS, which didn't work everything else has been tested and works fine.
    So I ordered micron memory 2X512 PC 2100 266 ECC REG which I was told by the supplier that it was compartible, that didn't work either.  I then went on to check the battery, to my surprise the battery was low so I thought I had nailed it, went out bought a new battery but the problem still exits.  I must say though after installing the micron memory it did boot up but when I went into BIOS to change settings to boot fro CDROM  the damn thing would not restart I had to switch it off using the power button to restart it and when it restarted all i got was beeps.  After that to  get it to bootup I have to reset CMOS using the jumper and when it boots up it gives a checksum error message.  I have a choice of two at this stage
    (1) To Press F1
    (2) To Press delete o go into BIOS setup
    The F1 option takes me as far as the windows log on screen and that's it cuts off as if it is gonna boot itself backup but just hangs there.
    The Delete option takes into BIOS which when exited the PC does nothing until powered down and powered up again, from here I have to reset CMOS to get it to bootup.
    I have been told that the  kingston memory is not compatible but my question is how did it work the first two weeks?
    Good ol' Bas have helped out on this one quite often but here I am three months on still in a struggle.  I thought of RMAing the board but it would cost me about 160 pounds and with that kind of money I could pick up another boad from kompllete.com and remain with some change for a couple of buds.
    "To bass You said in the last post that the poblem could be the power supply changed it but that has not solved my problem"

  • The message cannot be seen on incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    A message cannot be seen on my incoming emails.  I can only view the message if I click on reply.  Also any links attached to email will not open.  I have tried everything to solve the problem but not able to.

    Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Jpg sent by email will not display in outlook 2010

    Since I have upgraded top the latest os pictures sent by email will not save or display in outlook 2010.
    Help please

    I agree, i can't understand why they don't just explain the settings.  And why they do not consistently work.
    I too had issues, Outlook was "working" when i set up the @me account, then I started getting the annoying little internat email login popup (that does not go away).  Finally after many "experiments" i have it "apparently working" (will explain working with the following settings:
    accoutn type: IMAP
    incoming server: imap.mail.me.com Port: 993: SSL
    outgoing server: smtp.mail.me.com   Port: 25 (default): Auto
    "Require SPA" is checked, but not on outgoing server.
    It does now finally work without putting up the annoying internet email login.  However, now i discoverd a greater problem.
    OUTLOOK IS NOT REALLY SENDING THE EMAIL.  It is putting it in the "sent" box as if it did, but no one receives it.  No errors, no warning.  And this dates all the way back to the time i started using the @me account.  My only work around is to use the stupid icloud mail browser app.  Really low in functionality compared to outlook.
    This really affects the reliability of the icloud product and this is a serious error.  It really cuts down on the utility of the icloud and whewther it can be integrated with the PC at all.  Like everyone else i have also had the creation of multiple calendars and multiple contacts. 
    Apple better fix this quick or a lot of people will start using gmail, droid and google cloud products.

  • Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main  Dell computer and my Iphone. Any ideas?  Duanekot

    Overnight, the taxt body of emails will not display for all messages in the inbox.  Only the From and To and a subject line display.  All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully.  Any ideas?? Duanekot

    See if this helps .... Reset the iPad.
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

  • I use MAIL to retrieve my email.  One spam email will not delete.  HELP!  How do I get rid of it?

    I use MAIL to retrieve my email.  One spam email will not delete.  HELP!  How do I get rid if it?  This is on an iPad2.

    Try this. Don't open the email. Swipe across it in the preview window and a red delete button will pop up. Use that to delete it. You can delete it from the trash the same way if needed.

Maybe you are looking for

  • Internal error occurs in background job scheduling

    Hi Experts, We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38. Please find the following observation on our side on this message. 1) This messag

  • Obtaining the list of data interfaced out of SAP HCM

    Hello, we got a good challenge from our partners in the business organization that we support. The Data Privacy officer on the business partner side would like to know: - what other systems are "takers" of the data from our SAP HCM instance - what da

  • Can I monitor iMessages on iPod touch?

    Is there anyway to monitor my child's iMessages on her iPod touch?

  • Payroll Report

    Hi,    My company has implemented HR & Finance. Today my finance team asked me to develop PAYROLL report for them.They asked to them a brief inputs about the avaliable business content PAYROLL reports...... So what exactly i am looking for....Is the

  • New to Muse.  Help

    As a volunteer, I have been asked to take over a website developed in Muse.  Do I need to subscribe to Muse and if so, does that allow me to easily make updates to the wbesite?  Also, can the Muse website easliy be converted to Wordpress? Thank you v