My entire project keeps becoming unrendered after about a minute

Hi guys, hopefully someone can help me with this.
I'm making a documentary in HD, so it's a pretty big project file. Yesterday when I opened the project, it loaded everything and worked for about 1 minute, then I got the spinning wheel for a minute or two, then every single video clip in the entire project became unrendered. I closed it out and didn't save it and everytime I open it back up it keeps doing the same thing. It's doing this when I'm not even editing, I was just watching clips and transcribing them.
I have tried making a copy of the project file in a different location just to see if it would work normally, and changing to unlimited RT and I trashed my preferences, but none of that is working. I also closed out all of the sequences except one, because I did have a lot of them open at once and I thought that might be overloading it or something, but that didn't help either.
Any ideas? I don't want to have to end up re-rendering the entire thing every 30 seconds and I can't really edit without being able to see the video...
Thanks,
Lisa

The media is 1920x1080, 60i, I think the setting is FX or whatever the highest one is on a Canon Vixia HF200.
The Sequence is set to Apple Intermediate Codec, HDV 1080i60 (mine doesn't show up with an AVCHD option for this...or a 1920x 1080, I'm pretty sure the sequences are 1440x 1080...Anyone know what the deal is with that?)
I'm using Final Cut Express 4.0
And the project was working fine up until now. But, last week one of my hard drives kept somehow ejecting itself. I ended up being able to close it without saving and reopen so I didn't have to "reconnect media" and render.

Similar Messages

My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed. After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed" After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again. This is really frustrating.

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

When I leave my imac unattended for about 15 minutes, instead of it going to sleep, it shuts off entirely. Is there any way I can have it go to sleep after about 15 minutes of inactivity, without it shutting off entirely?

when I leave my imac unattended for about 15 minutes, instead of it going to sleep, it shuts off entirely. Is there any way I can have it go to sleep after about 15 minutes of inactivity, without it shutting off entirely?

You are correct as I tried that and still have the problem. I did the pmset -g in termal you suggest and here is mine. This original post is my exact problem that has driven me crazy for far to long. Can you help WZZZ?
Last login: Sun Feb 22 09:26:44 on console
RLs-iMac-3:~ RLMac$ pmset -g
Active Profiles:
AC Power -1*
Currently in use:
standby              0
Sleep On Power Button 1
womp                 1
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            0
autorestart          0
networkoversleep     0
disksleep            10
sleep                0 (sleep prevented by storeagent)
autopoweroffdelay    14400
hibernatemode        0
autopoweroff         1
ttyskeepawake        1
displaysleep         15
standbydelay         4200
RLs-iMac-3:~ RLMac$

When I play songs on my itunes account, they stop after about one minute and itunes goes to the next one. how do I fix this? These are songs in entire albums that I have purchased.

when I play songs on my itunes account, they stop after about one minute and itunes goes on to the next song. This is happening with songs on albums I have purchased direclty through itunes

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken files from your iTunes library, go to the iTunes Store home page, click on the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to close and restart iTunes.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Firefox 7.1 keeps frerezing after about 15 minutes of use if I click on a website the system sticks and Freezes up. The only way to resolve it is to close and then re-open Firefox

The problem occurs frequently and can effect any website. After about 15 minutes of surfing, I will click on a link and suddenly The word "Connecting" appears in the URL box and little circle (which used to be an hourglass) starts spinning.
After thatI can't connect ti any website, including ones I visited moments before, unless I close down all firefox windows and reopen a new one. It then works fine for a few minutes, before it happens again

Type in the address bar
about:config
Accept the warning.
In the page that appears, in the Filter box, type
network.http.max-connections
Change the value to 32 (which is probably set to 256 in your case).
Close that page.
Restart the browser.

I can get to my escoinst website, but firefox keeps kicking me off it after about 15 minutes; how can I fix this problem?

I use escoinst.com for practice tests for epa classes, but firefox boots me off the site after about 15 minutes. I need to stay on this site for an average of 30 minutes. How can I remedy this problem?

I just did the about:config....I do not have dom.ip.plugins.enabled.npswf32.dll; I do have dom.ipc.plugins.enabled.np2pstub.dll;false. Also, my timeoutSecs is set at 45. I also noticed that a few of the things are listed as userset and the others are default. What should they be? I don't recall setting anything.
Thanks for any help in resolving this 5 month very frustrating issue.
Tammie

MacBook Pro OS X 10.7.5 Computer hangs after about 5 minutes

After about 5 minutes of use, the multi-colored ball shows up and the computer hangs. It keeps coming and going after the initial 5 minutes of use.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Satellite A210-128 swichting-off after about 30 minutes

Hi, I have a problem with my notebook A210-128, it switches off after about 30 minutes of working and after it does not start for about 3 minutes.
When I play some new game in high details it switches off faster. I assume that it can heat up, because the base of my notebook becomes hotter quicker than it was before.
How can I check the temperature of my processor to exclude this reason or is it something else?
Please help.

Hi!
The notebook gets too hot and so it turned off by itself.
You should always ensure that there is enough free space around the notebook. This is important for good air circulation.
So dont use a notebook in bed, couch or something else because this not good for the air circulation.
In your case I would clean the internal cooling fan. You dont need to disassemble anything. To clean use compressed air spray and could blow away the dust from the cooling ventilator.
If it doesnt help you should go to an ASP (authorized service provider) and let check your notebook.
Bye

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. How can I go back to attached images?

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.

Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom

None of my iDevices can read my iTunes library after an hour of availibility. When I first start iTunes I can read the library, but after about 30 minutes my iPad's and iPhones can no longer access the library. I see it in the shared list, but no access.

None of my iDevices can read my iTunes library after about 30 minutes. My iDevices lose connection to my library and I have to do one of the three following things in iTunes to regain connectivity: 1. Restart iTunes 2: Stop / Start Home Services 3: Start playing a song.
I'ts as if iTunes goes into a background or sleep mode. During the loss of connectivity my iDevices show that there's a library shared, but I cannot connect to it.

Smae issue here, but I'm unable to get Home Sharing started again (after MAc and iOS restarts, Home Sharing on/off. etc.) This happend a few weeks ago and turngin Home Sharing Off/On fixed the connection issue b/w iPad2 5.1 and iTunes 10.6.1 running on a OSX10.6.8.
I updated to iOS 5.1.1 on iPad2 today, watched a movie and then about 20 minutes into a 2nd movie I lost connection (Sharing tab in Video app disappeared and has not come back.) The update seems like the culprit, but odd it worked for over 2 hours before stopping, odd I can't get Sharing to work anymore (iTunes see's my iOS devices b/c I can conenct to iTunes to enter my passcod efor connecting the Remote app.) Appears to be an issue with iTunes broadcasting Home Sharing, even thougt it says it is on.

Zen Sleek Photo Freezes/Locks Up after about 5 minutes usage (need to drain battery to recov

Hi,
My 20G Zen Sleek Photo has just recently transformed itself into a useless brick.
No matter what I try and do, it always ends up freezing after about 5 minutes usage. When you force a reset it does unlock but when it comes back on it sticks on the Creative "copyright" start up screen.
I've reformatted and re-installed the firmware several times but with the same result.
font face="comic sans ms,sans-serif">
The only time it totally unlocks is when you either:
() let the battery fully drain and then recharge it or
(2) you disconnect the battery lead and then press the On/Off switch for several minutes.
I've looked everywhere for a solution/reason but nothing. You find plenty of people with the same problem but no answers. Surely someone knows how to fix the problem
Is it a faulty battery (unlikely because mine charges up fine and holds it charge well)
Is it the hard dri've (very unlikely since the player can start up correctly [given the above recovery procedure] and play tracks within the 5-0 minutes you have available)
Is it the firmware (I doubt it, I can't see what the firmware's got to do with a delayed lock up, having worked fine up to that point)
Is it the motherboard (maybe....., to my mind it points to a component failure that allows an electric charge to build up and not dissipate, the only way to discharge it is to short the battery pins [with, I hasten to add, the battery removed!])
font face="comic sans ms,sans-serif">
Has anyone within the Creative community successfully solved this problem Has anyone received a decent answer from Creative
I find it staggering that the guys at Creative have washed their hands of this problem. They, after all, are the most likely people to identify the problem - only they have a schematic of the motherboard that would allow them to investigate and locate the problem.
For the record the firmware I'm using is v .0.0.
Any guidance would be much appreciated,
Victor

Is there really no one with an answer to this problem or have I overlooked a previous post that explained the fault.
BR
Victor

I try to open Acrobat I get a message that I need to register the product. I click on register and after about a minute, I'm told that I don't have an internet connection. My internet connection is working fine. In fact I registered Acrobat Pro XI using m

I try to open Acrobat I get a message that I need to register the product. I click on register and after about a minute, I'm told that I don't have an internet connection. My internet connection is working fine. In fact I registered Acrobat Pro XI using my account, but the program itself will not recognize it or allow me to use the software. What do I do?

If you already registered, then there is no point to trying to do so again. Simply dismiss the dialog.
Mylenium

I have just bought McSudoku and it quits after about a minute every time. How do I correct it or get a refund?

I have just bought McSudoku and it quits after about a minute every time. How do I correct it or get a refund?

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

Dynamic to Static VPN dies after about 4 minutes

Hey everyone, I have an interesting issue with a dynamic to static VPN setup. I currently run a pair of Cisco Pix 515e firewalls in a failover setup. They are running OS 8.0.4 and they run great. I used to have a VPN between these and my office where the remote office had a static IP address. I am moving that to a new connection which uses dynamic IP addresses.
I setup a pre-shared key on the DefaultL2LGroup on the Pix and removed the existing static tunnel-group. I also reconfigured the remote firewall which is a Netgear firewall to connect to the Pix. It is still using main mode and the rest of the setup is pretty much the same.
The VPN connection establishes fine and I can pass traffic through it with no issues. The problem is that every 3 minutes and 50 seconds, the VPN will go down for a few seconds. It looks like it rekeys. My stuff will stop responding and then it will re-establish and it is fine. It happens every 3 minutes and 50 seconds like clockwork.
I have checked everything I could think of and am not sure where the issue is. I know I can do detailed debugs on the IPSec but am not sure what I should be looking there. The basic debug just givs the generic message below that says the tunnel can't communicate with the peer. I have seen that message before but not usually with a VPN that establishes. Generally if this message comes up, the tunnel never works.
Any ideas would be great.
Thanks
Neal
Group = DefaultL2LGroup, IP = X.X.X.X, Removing peer from peer table failed, no match!
Group = DefaultL2LGroup, IP = X.X.X.X, Error: Unable to remove PeerTblEntry

I did more testing and it seems that the tunnel sites at the MM_ACTIVE state and doesn't go past that. The information is the same on both ends of the tunnel and traffic passes fine when at this state but then it rekeys after about 4 minutes and starts again.
I tried changing the tunnel to an Aggresive Mode tunnel but using a name for the remote office firewall ID and now it sits at AM_ACTIVE but doesn't go past that point either.

I can watch all of my old TV shows on iTunes, but the last one I downloaded jammed up after about one minute. I tried quitting I-tunes and re-starting my computer to no avail. iTunes won't even let me delete it so I can try downloading it again.

I can watch all of my old TV shows on iTunes, but the last one I downloaded jammed up after about one minute. I tried quitting I-tunes and re-starting my computer to no avail. iTunes won't even let me delete it so I can try downloading it again. But it will let me delete other episodes.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forum.
Regards.

My entire project keeps becoming unrendered after about a minute

Similar Messages

Maybe you are looking for