My entire screen is in tiny font, toolbars, tabs and the main window
I found my answer on how fix the size of my resolution back to normal on here but having trouble with getting my settings and font size back to default. Everything on my screen is smaller and not sure how to go back to "normal". Any help would be appreciated.
I have a mac book white 2009..i think it was a gift. mac os x 10.5.8 hope that helps.
If it's Snow Leopard, there is no true full screen for windows, but you can resize the windowby moving it to top left by dragging on the top "frame" then drag the bottom right corner to fill as much screen as you want. Once you've set the size that file or application should remember it and open at that size every time.
But you need to do that for each appication.
For Lion, ask in the Lion forum; I understand it has proper full-screen capability, but I don't use Lion so can't advise.
Similar Messages
-
Hi I bought macbook Pro Retina 1.3 from India on the 29th March 2014 and currently I am in Norway. And suddenly I can see the inside display screen is broken. Nothing from outside and the main top screen. I got by email from the shop in India, Mumbai where I purchased it and I have the photos of the screen where do I upload kindly urgently do let me know. It is under warranty till today and I need your urgent details so that I can upload required datas and I shall go back to India on the 5th April 2015 hence I need to get from you how to go about. Thank you. Uday Kumar Ghosh +47 455 48 953
Thank you. I did contact Apple Norway and they already raised a case no based on which I shall go and hand over my mac pro retina 13inch. As per Apple Norway, as the case has been registered before the expiry of the warranty, Apple India to accept the warranty as well and get the set repaired under warranty. Thank you.
-
I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.
I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137 -
How to change the default window size display font size on Lync 2013 main window?
Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
my iphone 4 is not responding the screen is just showing a usb lead and the itunes symbol. when i plug it into my desktop mac and try to sync it to itunes ,itunes is telling me the phone is in a restore mode. How do i get it to respond without restoring the phone to new ? there is no option to restore with backup as i have not backed up any of the data on the phone any help would be greatly appreciated thanks
http://support.apple.com/kb/HT1808
You can't not restore if you have reached this point -
Screen refresh problem where data is entered and the screen doesn't refresh
Many people in the company are experiencing the odd screen refresh problem where data is entered and the screen doesn't refresh to show the updated result in corresponding cell formulas.
Microsoft have issued a hotfix to fix the issue for Excel 2003 as shown. Microsoft released a hotfix for this problem (<a href="advisory?ID=978908">KB978908</a>). Display memory tends to pick up data from hidden sheets and pastes it
into the active screen. No impact on the file. This occurs when protecting and unprotecting worksheets in VBA. I also suspect that enabling and disabling screen refresh contributes to this problem. In any case there is a fix, albeit with the following disclaimer:
As of yet I have not been able to find a fix for this for office 2010 and 2013, Any suggestions would be great.Hi,
Based on your description, Excel does not show the text strings when you typing. It may be caused by the cell format, if we set the cell format as ";;;" in custom format, it will not display the text that you typed.
And the issue may be caused by the third-party input method, there are some compatibility issue between them.
If the issue still exits, please try the following methods
Verify/install the latest updates
Repair your Office program
Regards,
George Zhao
TechNet Community Support -
How do you stop the welcome to firefox 4 screen from coming up every time I open firefox? I get two tabs, one the welcome window, then my home page. How do you stop the bloody welcome screen?
Its not my home page, Like I said, I hae my home page also come up in a different tab (google) I also get the welcome to FF4 on a seperate tab. My home page is set to google. But I dont want the welcome screen to pop up
-
i have apps loaded on my iPad. they show in the main screen are not available to load documents to in the window list which should appear below the main window. the same apps do appear in the sub window on my other iPad. any ideas?
From what I can see, unless you're doing things with old versions of Xcode on a Mac (in which case, the solution seems to be to upgrade to the latest version), this seems to e an iTunes issue.
Accepting that it works fine with another iPad, I suggest trying the following:
1. Restart the non-working iPad
2. If that doesn't work, reinstall iTunes. If you're on a Windows PC, I suggest using Control Panel to uninstall all the Apple apps, restarting the PC, and doing a fresh install. If you're using a Mac, a repair permissions might help too.
iTunes 10.3 is now available, and that may make a difference. -
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you -
My MacBook wouldn't go to sleep, it keeps loading, so I have to turn it off. When I turn it on a blank screen comes on, I shut the lid and open it and the main menu screen comes up but the cursor won't work for awhile. Then, eventually, the cursor will work and everything is fine. Hmmm?
Just in case it still didn't work...I copied and pasted the information below...
Battery Information:
Model Information:
Serial Number: D86052301B8DCMDAG
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 000a
Cell Revision: 0173
Charge Information:
Charge Remaining (mAh): 3638
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4196
Health Information:
Cycle Count: 631
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8103
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 62
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 62
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000979a4
Charging: No -
Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!
Bad video card, call Apple, get a case number and return it.
-
just update my mac it said "critical update" something like that so i updated and now my screen has like random dots all over and the colours are all messed up its like negative can someone please help?
Adds the ability to make and receive FaceTime audio calls
Adds call waiting support for FaceTime audio and video calls
Adds the ability to block incoming iMessages from individual senders
Improves the accuracy of unread counts in Mail
Resolves an issue that prevented Mail from receiving new messages from certain providers
Improves AutoFill compatibility in Safari
Fixes an issue that may cause audio distortion on certain Macs
Improves reliability when connecting to a file server using SMB2
Fixes an issue that may cause VPN connections to disconnect
Improves VoiceOver navigation in Mail and Finder
Provides a fix for SSL connection verification
this was the update
never said anything about the screen -
my ipod is a older generation...when i turn it on the screen popps up with a usb cord and the itunes logo.which i assume means it needs to be linked...my issue it wont link
What happens when yo connect to computer and restore via iTunes
iTunes: Restoring iOS software -
My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?
My iPad screen has gone to a fuzzy grey and the machine won't operate. Any suggestions?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Maybe you are looking for
-
Hello Friends I am facing problem while saving the data into the ms access 2007. Below picture shows my database and table Below picture shows my error log. Here is my GettingCategoryId() method code. private OleDbCommand GettingCategoryId() OleDbCom
-
How can I attach j-pegs and other documents to an email unopened and stop each them taking up a whole page of my email ?
-
The adobe icon has been replaced by vlc icon
What can I do to get the Adobe icon back in my apps and on my task bar? I have Windows 8.
-
If WDA will be able to call a Flash island, and Flash can call javascript
In this thread here: How would/should you invoke a javascriptable applet from WDA or WDJ? Thomas said that an upcoming release of WDA will let WDA call Flash "islands". Since this link: http://www.adobe.com/devnet/flash/articles/external_interface.ht
-
Hello, Can anyone advise me on how does Rapid install validates the Filesystem during the multinode install for the remote apps tier while running the fresh install from db tier. I am trying to do the install with 2-node apps tier and getting the err